最新の2024年06月試験156-215.81問題集で合格させる認証試験合格させます
最新でリアルなCheckPoint 156-215.81試験問題集解答があります
CheckPoint 156-215.81 認定試験は、Check Pointのセキュリティ技術を定期的に使用するITプロフェッショナルを対象としています。これには、ネットワーク管理者、セキュリティエンジニア、およびその他のITプロフェッショナルが含まれます。彼らは、組織のネットワークのセキュリティを管理および維持する責任があります。この試験は、サイバーセキュリティのキャリアを追求したいと考えている人々にも適しています。
チェックポイント156-215.81としても知られるチェックポイント認定セキュリティ管理者R81認定試験は、ネットワークセキュリティを専門としたいITプロフェッショナル向けの一般的な認定プログラムです。この認定試験は、チェックポイントセキュリティゲートウェイおよび管理ソフトウェアブレードシステムのインストール、構成、管理など、ネットワークセキュリティの重要な分野で候補者の知識とスキルをテストするように設計されています。
質問 # 118
Look at the screenshot below. What CLISH command provides this output?
- A. show configuration all
- B. show confd configuration all
- C. show configuration
- D. show confd configuration
正解：C
解説：
質問 # 119
CPU-level of your Security gateway is peaking to 100% causing problems with traffic. You suspect that the problem might be the Threat Prevention settings.
The following Threat Prevention Profile has been created.
How could you tune the profile in order to lower the CPU load still maintaining security at good level? Select the BEST answer.
- A. Set the Performance Impact to Medium or lower.
- B. Set the Performance Impact to Very Low Confidence to Prevent.
- C. Set High Confidence to Low and Low Confidence to Inactive.
- D. The problem is not with the Threat Prevention Profile. Consider adding more memory to the appliance.
正解：A
解説：
Explanation
The BEST way to tune the profile in order to lower the CPU load still maintaining security at good level is to set the Performance Impact to Medium or lower. This will reduce the number of packets that are inspected by the Threat Prevention blades, while still providing a high level of protection . Setting High Confidence to Low and Low Confidence to Inactive will lower the security level, as it will allow more traffic that may be malicious. The problem is likely with the Threat Prevention Profile, as it can have a significant impact on the CPU utilization of the Security Gateway. Adding more memory to the appliance will not solve the problem, as memory is not the bottleneck in this case. Setting the Performance Impact to Very Low Confidence to Prevent will increase the CPU load, as it will inspect more packets and block more traffic that may be false positives.
References: Threat Prevention Administration Guide, Check Point R81.10
質問 # 120
What type of NAT is a one-to-one relationship where each host is translated to a unique address?
- A. Destination
- B. Hide
- C. Static
- D. Source
正解：C
解説：
Explanation
The type of NAT that is a one-to-one relationship where each host is translated to a unique address is Static NAT. Static NAT maps an unregistered IP address to a registered IP address on a one-to-one basis3. This means that for each internal host, there is a corresponding external address that represents it3. Therefore, the correct answer is B
質問 # 121
When a gateway requires user information for authentication, what order does it query servers for user information?
- A. First the highest priority LDAP server, then the internal user database, then lower priority LDAP servers, finally the generic external profile
- B. First the Internal user database, then generic external user profile, finally LDAP servers in order of priority.
- C. First - Internal user database, then LDAP servers in order of priority, finally the generic external user profile
- D. The external generic profile, then the internal user database finally the LDAP servers in order of priority.
正解：B
質問 # 122
Fill in the blank: The position of an implied rule is manipulated in the __________________ window.
- A. NAT
- B. Object Explorer
- C. Global Properties
- D. Firewall
正解：C
解説：
Explanation
The position of an implied rule is manipulated in the Global Properties window. Implied rules are predefined rules that are not displayed in the rule base. They allow or block traffic for essential services such as communication with Check Point servers, logging, and VPN traffic. The position of an implied rule can be changed in the Global Properties > Firewall > Implied Rules section56. References: How to view Implied Rules in R80.x / R81.x SmartConsole, Implied Rules
質問 # 123
Security Zones do no work with what type of defined rule?
- A. Firewall rule
- B. IPS bypass rule
- C. Manual NAT rule
- D. Application Control rule
正解：C
解説：
https://community.checkpoint.com/t5/Management/Workaround-for-manual-NAT-when-security-zones-are-used/td-p/9915
質問 # 124
Fill in the blank: The position of an implied rule is manipulated in the __________________ window.
- A. NAT
- B. Object Explorer
- C. Global Properties
- D. Firewall
正解：C
質問 # 125
Which of the following is NOT an identity source used for Identity Awareness?
- A. AD Query
- B. Remote Access
- C. UserCheck
- D. RADIUS
正解：C
質問 # 126
Fill in the blank: The ________ feature allows administrators to share a policy with other policy packages.
- A. Concurrent policies
- B. Shared policies
- C. Concurrent policy packages
- D. Shared policy packages
正解：D
質問 # 127
Which of the following commands is used to monitor cluster members?
- A. cluster state
- B. cphaprob
- C. cphaprob state
- D. cphaprob status
正解：C
質問 # 128
Name the utility that is used to block activities that appear to be suspicious.
- A. Stealth rule
- B. Drop Rule in the rulebase
- C. Penalty Box
- D. Suspicious Activity Monitoring (SAM)
正解：D
解説：
Explanation
Suspicious Activity Monitoring (SAM) is the utility that is used to block activities that appear to be suspicious. SAM allows administrators to block connections from specific IP addresses or network objects for a specified period of time3. Penalty Box is a feature of SAM that automatically blocks connections from sources that generate too many log entries. Drop Rule in the rulebase is a firewall action that discards packets that match certain criteria. Stealth rule is a firewall rule that prevents direct access to the Security Gateway from external sources.
質問 # 129
One of major features in R81.x SmartConsole is concurrent administration.
Which of the following is NOT possible considering that AdminA, AdminB, and AdminC are editing the same Security Policy?
- A. AdminA, AdminB and AdminC are editing three different rules at the same time.
- B. AdminC sees a lock icon which indicates that the rule is locked for editing by another administrator.
- C. AdminB sees a pencil icon next the rule that AdminB is currently editing.
- D. AdminA and AdminB are editing the same rule at the same time.
正解：B
質問 # 130
Fill in the blank Once a license is activated, a___________should be installed.
- A. License Contract file
- B. Security Gateway Contract file
- C. License Management file
- D. Service Contract file
正解：D
解説：
Explanation
Once a license is activated, a Service Contract file should be installed. This file contains information about the license expiration date, support level, and other details3. The other options are not valid file names.
References: 3: Check Point R81 Security Management Administration Guide, page 15.
質問 # 131
Which one of these features is NOT associated with the Check Point URL Filtering and Application Control Blade?
- A. Configure rules to limit the available network bandwidth for specified users or groups.
- B. Make rules to allow or block applications and Internet sites for individual applications, categories, and risk levels.
- C. Use UserCheck to help users understand that certain websites are against the company's security policy.
- D. Detects and blocks malware by correlating multiple detection engines before users are affected.
正解：D
質問 # 132
Which message indicates IKE Phase 2 has completed successfully?
- A. IKE Mode Complete
- B. Quick Mode Complete
- C. Aggressive Mode Complete
- D. Main Mode Complete
正解：B
質問 # 133
The "Hit count" feature allows tracking the number of connections that each rule matches. Will the Hit count feature work independently from logging and Track the hits even if the Track option is set to "None"?
- A. Yes, it will work independently as long as "analyze all rules" tick box is enabled on the Security Gateway
- B. No, it will not work independently because hit count requires all rules to be logged
- C. No, it will not work independently. Hit Count will be shown only for rules with Track options set as Log or alert
- D. Yes, it will work independently because when you enable Hit Count, the SMS collects the data from supported Security Gateways
正解：D
解説：
Explanation
The Hit count feature will work independently from logging and track the hits even if the Track option is set to
"None"1, p. 23. When you enable Hit Count, the Security Management Server collects the data from supported Security Gateways and displays the number of connections that each rule matches in SmartConsole3. References: Check Point CCSA - R81: Practice Test & Explanation, Check Point Security Management Administration Guide R81
質問 # 134
Choose what BEST describes the reason why querying logs now is very fast.
- A. New Smart-1 appliances double the physical memory install
- B. The amount of logs been store is less than the usual in older versions
- C. Indexing Engine indexes logs for faster search results
- D. SmartConsole now queries results directly from the Security Gateway
正解：C
解説：
Ref: https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_LoggingAndMonitoring_AdminGuide/Topics-LMG/Enabling-log-indexing.htm
質問 # 135
What is a role of Publishing?
- A. Modifies network objects, such as servers, users, services, or IPS profiles, but not the Rule Base
- B. The Publish operation sends the modifications made via SmartConsole in the private session and makes them public
- C. The Security Management Server installs the updated session and the entire Rule Base on Security Gateways
- D. The Security Management Server installs the updated policy and the entire database on Security Gateways
正解：B
質問 # 136
A network administrator has informed you that they have identified a malicious host on the network, and instructed you to block it. Corporate policy dictates that firewall policy changes cannot be made at this time. What tool can you use to block this traffic?
- A. Anti-Malware protection
- B. Policy-based routing
- C. Anti-Bot protection
- D. Suspicious Activity Monitoring (SAM) rules
正解：B
解説：
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_LoggingAndMonitoring_AdminGuide/Topics-LMG/Monitoring-Suspicious-Activity-Rules.htm
質問 # 137
......
CheckPoint 156-215.81（Check Point Certified Security Administrator R81）認定試験は、サイバーセキュリティ分野で高く評価されている認定資格です。この試験は、Check Point Security Gatewaysの管理とメンテナンスを担当するプロフェッショナルのスキルと知識をテストするように設計されています。ネットワークセキュリティ、セキュリティ管理、VPN技術など、幅広いトピックをカバーしています。さらに、候補者のCheck Point Security Gatewaysの構成、管理、トラブルシューティング能力をテストします。
156-215.81問題集を使って一日でCheckpoint Certified Security Administrator試験最速合格：https://www.goshiken.com/CheckPoint/156-215.81-mondaishu.html
100% 高得点合格保証される156-215.81無制限402解答：https://drive.google.com/open?id=1G1-MiawK8sIdPauK6CWCufIHWE1rd2Fl