検証済み201問題集と解答100%合格はここにGoShiken
合格させる201試験一発合格保証2025問題集！
この試験は、F5 BIG-IPデバイスの管理と構成のスキルを向上させたいネットワーク管理者向けに設計されています。この認定プログラムは、BIG-IPデバイスとソリューションの展開、構成、および管理を担当する専門家に適しています。この試験は、F5 Big-IP管理の専門知識を実証したい個人にも適しており、キャリアを進めたいと考えています。
質問 # 110
Which log file should the BIG-IP Administrator check to determine if a specific user tried to log in to the
8IG-IP Configuration by utility?
- A. /var/log/trn
- B. /var/log/pam/tally/log
- C. /ver/log/secure
- D. /var/log/http.d
正解：C
質問 # 111
Refer to the exhibit.
Which two pool members should be chosen for a new connection? (Choose two.)
- A. 172.16.15.7.80
- B. 172.10.15.2.80
- C. 172.16.15.1.80
- D. 172.16.15.4.80
- E. 172.16.15.9.80
正解：A、D
質問 # 112
Assuming that systems are synchronized, which action could take place if thEl eo fv ae ir lcable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems.
- A. If network failElover is enabled, the standby system will assume the active mode.
- B. Whether or not network failElover is enabled, the standby system will stay in standby mode.
- C. If network failElover is enabled, the standby system will go into active mode but only until the network recovers.
- D. Whether or not network failElover is enabled, the standby system will assume the active mode.
正解：B
質問 # 113
A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which loadbalancing mode is most effective if the goal is to maintain a
relatively even load across all servers.
- A. Priority
- B. Observed
- C. Ratio
- D. Round Robin
正解：B
質問 # 114
Which two statements
describe differences
between the active and standby systems. (Choose two.)
- A. FailElover triggers only cause changes on the active system.
- B. Configuration changes can only be made on the active system.
- C. Monitors are performed only by the active system.
- D. Virtual server addresses are hosted only by the active system.
- E. Floating selfElIP addresses are hosted only by the active system.
正解：D、E
質問 # 115
A virtual server is listening at 10.10.1.100:80 and has the following iRule associated with it: when HTTP_REQUEST { if {[HTTP::uri] ends_with "txt" } { pool pool1 } elseif {[HTTP::uri] ends_with "php" } { pool pool2 } If a user connects to http://10.10.1.100/foo.html, which pool will receive the request?
- A. Unknown. The pool cannot be determined from the information provided.
- B. None. The request will be dropped.
- C. pool1
- D. pool2
正解：A
質問 # 116
When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?
- A. This is not possible since both systems are updated simultaneously.
- B. The first system to be updated will assume the Active role.
- C. The older system will issue SNMP traps indicating a communication error with the partner.
- D. Synching should not be performed.
正解：D
質問 # 117
Which parameters are set to the same value when a pair of BIGElIP devices are synchronized.
- A. host names
- B. MAC masquerade addresses
- C. VLAN failElsafe settings
- D. profile definitions
- E. system clocks
正解：D
質問 # 118
When network failover is enabled, which of the following is true?
- A. Either a network failure or loss of voltage across the failover cable will cause a failover.
- B. The failover cable status is ignored. Failover is determined by the network status only.
- C. The presence or absence of voltage over the fail over cable takes precedence over network failover.
- D. A network failure will not cause a failover as long as there is a voltage across the failover cable.
正解：D
質問 # 119
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?
- A. Ratio
- B. Least Connection
- C. Dynamic Ratio
- D. Round Robin
正解：A
質問 # 120
A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic. The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status. What is the possible cause of this issue?
- A. The BIG-IP device is NOT able to reach the Pool.
- B. HTTP 1.1 is NOT appropriate for monitoring purposes.
- C. The Node Health Monitor is NOT responding.
- D. The application is NOT responding with the expected Receive String.
正解：C
質問 # 121
How is persistence configured.
- A. Persistence is a global setting; once enabled, loadElbalancing choices are superceded by the persistence method that is specified.
- B. Persistence is an option within each pool's definition.
- C. Persistence is an option for each pool member. When a pool is defined, each member's definition includes the option for persistence.
- D. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
正解：D
質問 # 122
A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?
- A. Slow Ramp Time
- B. Action On Service Down
- C. Availability Requirement
- D. Allow SNAT
正解：A
解説：
Option ABC is a global configuration, has nothing to do with the new pool member, select D after excluding
質問 # 123
Refer to the exhibit.
The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into.
What should the BIG-IP Administrator do to verify if the iRule works correctly?
- A. Push configuration from this device to the group and start to monitor traffic on this device
- B. Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device
- C. Pull configuration to this device to the cluster and start to monitor traffic on this device
- D. Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device
正解：D
解説：
The device in the picture is a standby machine, of course there is no traffic, you need to log in to the host, and then pull the configuration to the host.
質問 # 124
Where is the loadElbalancing mode specified.
- A. within the pool member definition
- B. within the virtual server definition
- C. within the node definition
- D. within the pool definition
正解：D
質問 # 125
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, What changes, if any, would take place when the BIG-IP processes such packets?
- A. The source address would be changed to the NAT address and destination address would be left unchanged.
- B. The source address would not change, but the destination address would be changed to the NAT address.
- C. The BIG-IP would drop the request since the traffic didn't arrive destined to the NAT address.
- D. The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.
正解：A
質問 # 126
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)
- A. The device is NOT redirecting them to http.
- B. Packet Filters on the device are blocking port 80.
- C. DNS is property resolving the FQDN of the device.
- D. The administrator has the latest version of the web browser.
- E. The administrator has TCP connectivity to the device.
正解：C、E
質問 # 127
Refer to the exhibit
The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?
- A. Change Auto Last Hop to enabled
- B. Assign a physical interface to the new VLAN
- C. Create a Floating Set IP Address
- D. Set Port Lockdown of Set IP to Allow All
正解：B
質問 # 128
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members.
What is allowing users to continue to reach the disabled poo! members?
- A. A persistence profile on the Virtual Server
- B. A slow ramp time on virtual Server
- C. A persistence profile on the Pool
- D. A slow to time on Pool
正解：A
質問 # 129
Refer to the exhibit
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10 1.33 and port 443.
What is the reason for this problem?
- A. Packet Filter needs to be configured to allow a source
- B. Packet Filter is configured to allow port 443
- C. Self IP is configured to allow UDP 443
- D. Self IP is configured to allow TCP All
正解：C
質問 # 130
Which cookie persistence method requires the fewest configuration changes on the web servers to be implemented correctly.
- A. session
- B. passive
- C. rewrite
- D. insert
正解：D
質問 # 131
On the VCMP system, a BIG-IP host administrator imports a new ISO image into the host's /shared/images folder. The new ISO images that reside on the vCMP host are available for installation on the guest. How should the BIG-IP Administrator install one image from within the guest?
- A. Run the following command on guest
tmsh install sys software block-device-image image_name volume < volume_name> - B. Run the following command on host
tmsh install sys software block-device-image image_name volume < volume_name> - C. Install the new software on the host and wait for it to automatically be installed on all guests.
- D. Run the following command on guest
tmsh install sys software image image_name volume < volume_name>
正解：B
質問 # 132
......
F5 201認定試験は、候補者がBIG-IPシステムを深く理解する必要がある挑戦的なテストです。この認定を保持しているIT専門家が、F5の製品を使用して複雑なネットワーク環境を管理および構成するために必要な知識とスキルを確保するように設計されています。
201問題集完全版解答試験学習ガイド：https://www.goshiken.com/F5/201-mondaishu.html
リアル201は100%カバー率でリアル試験解答を試そう：https://drive.google.com/open?id=1SKBNZktIfckPcpAk4XTcL7Q-by1Wc6yW