2025年最新の有効な201テスト解答とF5試験PDF問題を試そう
無料F5 201試験問題と解答トレーニングを提供していますGoShiken
F5 201 (BIG-IP Administrator) 認定試験は、F5 BIG-IP アプリケーション配信ネットワークを管理、設定、トラブルシューティングするために必要なスキルと知識を検証するために設計されています。この認定は、企業環境で BIG-IP システムを管理および維持する責任がある IT プロフェッショナルを対象としています。この試験は、ネットワークの基礎、プロトコル、トラフィック管理、SSL/TLS オフロード、アプリケーション配信、セキュリティ、およびトラブルシューティングなど、さまざまなトピックをカバーしています。受験者は、BIG-IP 製品およびソリューションの設定と管理能力、および基盤となる技術の理解力について試験されます。
質問 # 130
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: ******;0; License is not operational (expired or digital signature does not match contents.) What should the BIG-IP Administrator do to avoid this error?
- A. Use the appropriate tmsh command with the no-license option
- B. Reactivate the license on the new device using the manual activation method
- C. Remove the license information from the UCS archive
- D. Revoke the license prior to restoring
正解：A
質問 # 131
When configuring a pool member's monitor, which three association options are available. (Choose three.)
- A. do not assign any monitor to the specific member
- B. inherit the node's monitor
- C. configure a default monitor
- D. inherit the pool's monitor
- E. assign a monitor to the specific member
正解：A、D、E
質問 # 132
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. bigip.license file
- B. Device root password
- C. SSL private keys
- D. QKViewfile
正解：D
質問 # 133
A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?
- A. Device Management > Traffic Groups
- B. Device Management > Devices
- C. Device Management > Overview
- D. Local Traffic > Virtual Servers
正解：D
質問 # 134
A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on a Trunk is DOWN.
What is the reason for this Interface status?
- A. The switch is NOT connected to the Interface
- B. There is NO transceiver installed on the Interface
- C. There is NO default route configured for this trunk
- D. The media speed of the interface has NOT been set
正解：A
質問 # 135
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it: when CLIENT_ACCEPTED { if {[TCP::local_port] equals 21 } { pool ftppool } elseif {[TCP::local_port] equals 23 } { pool telnetpool } If a user connects to 10.10.1.100 and port 22, which pool will receive the request.
- A. None. The request will be dropped.
- B. telnetpool
- C. Unknown. The pool cannot be determined from the information provided.
- D. ftppool
正解：C
質問 # 136
Refer to the exhibit.
The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.
What should the BIG-IP Administrator check next?
- A. Results from the platform diagnostics test
- B. Large files on the / file system
- C. Results from the EUD test
- D. Large files on /usr file system
正解：B
質問 # 137
A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client's IP address, but on the virtual servers their packets arrive on. What could best accomplish this goal.
- A. The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.
- B. Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.
- C. The decision to perform source address translation is always based on a client's address (or network). Thus, this goal cannot be achieved.
- D. A SNAT for all addresses could
be defined,
and then disable the SNAT processing for select VLANs.
正解：B
質問 # 138
Which statement is true concerning a functional iRule?
- A. iRules use a proprietary syntax language.
- B. iRules must contain at least one conditional statement.
- C. iRules must contain at least one event declaration.
- D. iRules must contain at least one pool assignment statement.
正解：C
質問 # 139
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?
- A. System > Configuration
- B. System > Platform
- C. Network > Self IPs
- D. Network > Interfaces
正解：B
質問 # 140
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
正解：A
質問 # 141
A site has six members in a pool. Three of the servers are new and have more memory and a faster processor than the others. Assuming all other factors are equal and traffic should be sent to all members, which two loadElbalancing methods are most appropriate. (Choose two.)
- A. Observed
- B. Priority
- C. Round Robin
- D. Ratio
正解：A、D
質問 # 142
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual
server processing takes place. Also assume that the NAT definition specifies a
NAT address and an origin address while all other settings are left at their defaults.
If the origin server were to initiate traffic via the BIGElIP, what changes, if any,
would take place when the BIGElIP processes such packets.
- A. The source address would not change, but the destination address would be changed to a seEllIfP of the BIGElIP.
- B. The source address would not change, but the destination address would be changed to the NAT address.
- C. The BIGElIP would drop the re quest since the traffic didn arrive destined to the NAT address.The BIGElIP would drop the request since the traffic didn. arrive destined to the NAT address.
- D. The source address would be changed to the NAT address and destination address would be left unchanged.
正解：D
質問 # 143
Which two statements describe differences between the active and standby systems? (Choose two.)
- A. Failover triggers only cause changes on the active system.
- B. Floating selfIP addresses are hosted only by the active system.
- C. Configuration changes can only be made on the active system.
- D. Monitors are performed only by the active system.
- E. Virtual server addresses are hosted only by the active system.
正解：B、E
質問 # 144
Assume a virtual
server
has a ServerSSL
profile.
What
SSL certificates are required on the pool members.
- A. The pool members.SSL certificates must only exist.
- B. The pool members.SSL certificates must be issued from a certificate authority.
- C. No SSL certificates are required on the pool members.
- D. The pool members.SSL certificates must be created within the company hosting the BIGElIPs.
正解：A
質問 # 145
Users are unable to reach an application. The BIG-IP Administrator checks the Configuration Utility and observes that the Virtual Server has a red diamond in front of the status. What is causing this issue?
- A. The Virtual Server is disabled.
- B. All pool members are down.
- C. The Virtual Server is receiving HTTPS traffic over HTTP virtual.
- D. All pool members have been disabled.
正解：B
質問 # 146
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is on the Standby Device
- B. The BIG-IP Administrator is NOT logged into command line to tail over
- C. The BIG-IP Administrator is logged in as administrator
- D. The BIG-IP Administrator is logged in as root
正解：A
質問 # 147
Refer to the exhibit.
A user attempts to connect to 10.10.10.1.80 using FTP over SSL with an FTPS client. Which virtual server will match and attempt to process the request?
- A. nvfs
- B. vsjutps
- C. vs_ftp
- D. vs_http
正解：C
質問 # 148
Which statement is true regarding failover?
- A. If the hardware failover cable is disconnected, both BIGIP devices will always assume the active role.
- B. Hardware failover is disabled by default.
- C. Hardware failover can be used in conjunction with network failover.
- D. By default, hardware fail over detects voltage across the failover cable and monitors traffic across the internal VLAN.
正解：C
質問 # 149
Assuming there are open connections through an active system's virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.
- A. All open connections are maintained.
- B. All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.
- C. All open connections are lost.
- D. When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.
- E. LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost.
正解：C
質問 # 150
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this?
- A. an address on the current system used to listen for failover messages from the partner BIG-IP
- B. an address of the other system in its management network
- C. an address on the current system used to initiate mirroring and network failover heartbeat messages
- D. an address of the other system in a redundant pair configuration
正解：D
質問 # 151
......
トップクラスF5 201オンライン問題集：https://www.goshiken.com/F5/201-mondaishu.html
201練習問題集で検証済みのGoShiken更新された255問題あります：https://drive.google.com/open?id=1frvMyf48JwJhndOALB6ifbBINojIvaxA