無料で使える300-410試験ブレーン問題集認定ガイド問題と解答
300-410認定概要最新の300-410のPDF問題集
Cisco 300-410 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
| トピック 11 |
|
| トピック 12 |
|
| トピック 13 |
|
質問 35
While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device.
Why is the image not uploading?
- A. The software image for the device is in bundle mode
- B. The device must be resynced to Cisco DNA Center.
- C. The device has lost connectivity to Cisco DNA Center.
- D. The software image for the device is in install mode.
正解: D
解説:
Section: Infrastructure Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and- management/dna-center/1-2-10/user_guide/b_cisco_dna_center_ug_1_2_10/ b_dnac_ug_1_2_10_chapter_0100.html
質問 36 
Refer to the exhibit. The engineer configured and connected Router2 to Router1. The link came up but could not establish a Telnet connection to Router1 IPv6 address of 2001:DB8::1. Which configuration allows Router2 to establish a Telnet connection to Router1?
- A. permit ip any any on access list EGRESS2 on Router1
- B. IPv6 address on GigabitEthernet0/0
- C. permit ICMPv6 on access list INGRESS for Router2 to obtain IPv6 address
- D. jpv6 unicast-routing
正解: A
質問 37
Refer to the exhibit. A network administrator configured an IPv6 access list to allow TCP return traffic only, but it is not working as expected. Which changes resolve this issue?
- A. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in - B. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out - C. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in - D. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out
正解: C
質問 38
The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.
The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?
- A. tacacs-server host 192.168.1.5 key Cisco123
- B. line vty 0 4
login authentication telnet - C. ip tacacs-server host 192.168.1.5 key Cisco123
- D. line vty 0 4
login authentication TAC-SERV
正解: B
質問 39 
Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?
- A. The destination of the flow exporter is not reachable.
- B. The flow monitor is applied in the wrong direction.
- C. The flow monitor is applied to the wrong interface.
- D. The flow exporter is configured but is not used.
正解: A
解説:
Section: Infrastructure Services
Explanation/Reference:
質問 40
Refer to the exhibit.
An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote logins?
- A. Enter the logging console debugging configuration command.
- B. Enter the aaa new-model configuration command.
- C. Enter the terminal monitor exec command.
- D. Enter the transport input ssh configuration command.
正解: A
解説:
The -logging console|| is a default and hidden command.
質問 41
Refer to the exhibit. The engineer configured and connected Router2 to Router1. The link came up but could not establish a Telnet connection to Router1 IPv6 address of 2001:DB8::1. Which configuration allows Router2 to establish a Telnet connection to Router1?
- A. permit ip any any on access list EGRESS2 on Router1
- B. IPv6 address on GigabitEthernet0/0
- C. permit ICMPv6 on access list INGRESS for Router2 to obtain IPv6 address
- D. jpv6 unicast-routing
正解: A
質問 42
Which configuration enables the VRF that is labeled ''inet'' on FastEthernet0/0?
A)
B)
C)
D)
- A. option D
- B. option B
- C. Option C
- D. Option A
正解: A
質問 43
Which statement about MPLS LDP router ID is true?
- A. The force keyword changes the router ID to the specified address without causing any impact.
- B. If not configured, the operational physical interface is chosen as the router ID even if a loopback is configured.
- C. The MPLS LDP router ID must match the IGP router ID.
- D. The loopback with the highest IP address is selected as the router ID.
正解: D
質問 44
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template".
What is the reason for the error?
- A. The software version of the template is different from the software version of the device.
- B. The template has an incorrect configuration.
- C. The changes to the template were not committed.
- D. The tag that was used to filter the templates does not match the device tag.
正解: D
解説:
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: -Cannot select the device. Not compatible with template.
質問 45
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
正解:
解説:
質問 46
Drag and Drop Question
Drag and drop the MPLS terms from the left onto the correct definitions on the right.
正解:
解説:
質問 47
Refer to the exhibit.
An engineer is troubleshooting a failed Telnet session from PC to the DHCP server. Which action resolves the issue?
- A. Remove sequence 30 and add it back to the IPv6 traffic filter as sequence 5.
- B. Remove sequence 20 for sequence 40 in the access list to allow Telnet.
- C. Remove sequence 20 and add it back to the IPv6 traffic filter as sequence 5.
- D. Remove sequence 10 to add the PC source IP address and add it back as sequence 10.
正解: D
質問 48
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:
What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
- A. R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
- B. R1 does not forward traffic that is destined for 192.168.30.0/24
- C. Network 192.168.130.0/24 is not allowed in the R1 table
- D. R1 does not accept any routes other than 192.168.130.0/24
正解: A
質問 49
A network administrator is troubleshooting a high utilization issue on the route processor of a router that was reported by NMS The administrator logged into the router to check the control plane policing and observed that the BGP process is dropping a high number of routing packets and causing thousands of routes to recalculate frequently. Which solution resolves this issue?
- A. Police the pir for BGP, conform-action set-prec-transmit, and exceed action set-clp-transmit.
- B. Shape the cir for BGP. conform-action transmit, and exceed action transmit.
- C. Police the cir for BGP, conform-action transmit, and exceed action transmit.
- D. Shape the pir for BGP, conform-action set-prec-transmit, and exceed action set-frde-transmit.
正解: C,D
質問 50
......
ベストなCisco 300-410学習ガイドと問題集には2022：https://www.goshiken.com/Cisco/300-410-mondaishu.html
トップクラスCisco 300-410試験材料で学習ガイド！練習問題バージョンで挑もう：https://drive.google.com/open?id=1VRPgj-jZgUwVQ--nPvgHJI2N_6zhXizl