無料EMC DES-6322学習ガイド試験問題と解答
DES-6322試験問題集、DES-6322練習テスト問題
この試験は、シナリオとソリューションに基づいた60問の選択式の問題で構成されています。試験時間は90分で、合格点は60％です。試験は、VxRailの展開、インストール、構成、管理、トラブルシューティングなどのトピックをカバーしています。試験に合格した候補者は、EMC Proven Professional - Specialist - Implementation Engineer、VxRail認定を取得します。
EMC DES-6322 Specialist - Implementation Engineer, VxRail試験は、VxRailシステムの実装と管理に特化したITプロフェッショナル向けの認定テストです。この試験では、VxRailの実装と管理に関連する様々なトピックがカバーされ、試験に合格するためには63％以上のスコアが必要です。この試験は、Dell EMCテクノロジーを扱うITプロフェッショナル向けのさまざまな認定を提供するDell EMC Proven Professionalプログラムの一部です。
質問 # 39
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?
- A. Data-In-Transit Encryption: Addresses fear of media theft Data-At-Rest Encryption: Addresses fear of rogue administrators
- B. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
- C. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
- D. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
正解：D
解説：
質問 # 40
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. V Series
- B. S Series
- C. G Series
- D. P Series
正解：B
質問 # 41
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?
- A. V Series
- B. D Series
- C. E Series
- D. G Series
正解：C
質問 # 42
Match each IDRAC Maintenance page tab to its description.
正解：
解説：
質問 # 43
A company needs to enable vSphere GPU capabilities on their VxRail cluster. To do so, they need to purchase a specific entitlement.
What licensing satisfies this requirement?
- A. vSAN Enterprise Plus Edition
- B. vSAN Advanced Edition
- C. vSphere Standard
- D. vSphere Enterprise Plus
正解：D
解説：
質問 # 44
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?
- A. Triggered Alarms > All Issues > Issues and Alarms
Triggered Alarms > vSAN > Health - B. Monitor > Issues and Alarms > All issues
Monitor > vSAN > Skyline Health - C. Monitor > All Issues > Issues and Alarms
Monitor > vSAN > Health - D. Triggered Alarms > Issues and Alarms > All issues
Triggered Alarams > vSAN > Skyline Health
正解：B
解説：
質問 # 45
Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?
- A. /etc/init.d/loudmouth restart
- B. systemctl restart loudmouth
- C. /usr/lib/vmware/loudmouth/bin/loudmouthd restart
- D. systemctl restart vmware-loudmouth
正解：D
質問 # 46
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?
- A. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)
- B. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
- C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
- D. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy
正解：B
質問 # 47
What are the requirements for a customer-supplied VDS in a VxRail deployment?
- A. 4 or 8 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only - B. 4 or 8 uplinks
Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN - C. 2 or 4 uplinks
Port groups for Discovery, Management vCenter Server, vMotion, and vSAN - D. 2 or 4 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only
正解：A
質問 # 48
What data protection option is included with VxRail?
- A. PowerProtect Software Data Domain Cloud Tier
- B. RecoverPoint for VM Avamar
- C. vSphere Replication NetWorker
- D. RecoverPoint for VM vSphere Replication
正解：D
質問 # 49
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?
- A. New node must be at the same VxRail version as existing nodes
- B. Node hardware must be identical to the other three nodes
- C. PCIe network card must be added to all nodes
- D. Node requires only the same drive configuration
正解：B
解説：
質問 # 50
An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?
- A. Service laptop must be on the same IP network as the iDRACs
- B. Single power zone must be used with adequate power cables
- C. Power distribution must support the power rating of a single node
- D. At least 36 in (92 cm) clearance exists in front of and behind the cabinet
正解：C
質問 # 51
What is a consideration when expanding a VxRail cluster? (Choose two.)
- A. G Series clusters can be expanded only with G Series nodes
- B. 1 GbE must be hybrid and single processor node type
- C. Expanding a cluster to 64 nodes requires a 25 GbE network
- D. Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed
正解：A、C
質問 # 52
Match each component of the VxRail HCI System Software to its description.
正解：
解説：
質問 # 53
What guideline should be followed when planning bandwidth between sites hosting VM objects and the witness nodes?
- A. 1500 MTU on the VSAN vmkernel interface
- B. 2 Mbps for every 1000 objects on the vSAN
- C. 5 ms with a recommended minimum bandwidth of 10Gbps
- D. 500 ms roundtrip (< 250 ms one way)
正解：B
質問 # 54
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?
- A. Network performance for virtual machines
- B. Latency and bandwidth measurement to the witness host
- C. Latency measurement between DCs for Stretched Clusters
- D. Network configuration and performance for vSAN
正解：D
解説：
質問 # 55
A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?
- A. VxRail ACE
- B. SolVe Online
- C. VxVerify
- D. CloudlQ
正解：B
質問 # 56
A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?
正解：
解説：
質問 # 57
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?
- A. Service laptop is on the same IP network as the iDRACs
- B. Redundant power zones exist with adequate power cables
- C. Power distribution supports only the power rating of a single node
- D. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet
正解：C
質問 # 58
......
EMC DES-6322 認定試験は、VxRail の実装と管理の専門知識を認定することで、IT プロフェッショナルが自分の専門知識を示し、キャリアアップやプロの機会を増やすことができる、やりがいのある試験です。
最新のDES-6322実際の無料試験問題は更新された106問があります：https://www.goshiken.com/EMC/DES-6322-mondaishu.html