無料Fortinet NSE6_FSW-7.2学習ガイド試験問題と解答
NSE6_FSW-7.2試験問題集、NSE6_FSW-7.2練習テスト問題
質問 # 11
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports. and these ports are connected to endpoints which are powered by PoE. Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
- A. Define an LLDP-ME0 location 10 to use standard protocols for power.
- B. Assign a new LL0P profile to handle different LLDP-ME0 TLVs
- C. Add power management as part of LLDP-MED TLVs to advertise.
- D. Create new a LLOP-MEO application type to define the PoE parameters.
正解：C
質問 # 12
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
- A. HA backup FortiGate managing FortiSwitch
- B. FortiSwitch functioning as standalone
- C. FortiGate managing FortiSwitch
- D. POE with high density FortiSwitch
正解：C
質問 # 13
What can an administrator do to maintain the existing standalone FortlSwltch configuration while changing the management mode to FortLink?
- A. FortiGate will automatically save the existing FortiSwitch configuration during the Forti-link management process.
- B. Enable the Forti-link setting on FortiSwitch before the authorization process
- C. Register FortiSwitch to For1ISwitch Cloud to save a copy before managing by Forti-Gate.
- D. Use a migration tool based on python script to convert the configuration
正解：B
質問 # 14
Which two types of Layer 3 interfaces can participate in dynamic routing on FortiSwitch? (Choose two.)
- A. Physical interfaces
- B. Loopback interfaces
- C. Detected management interfaces
- D. Switch virtual interfaces
正解：B、D
質問 # 15
Which QoS mechanism maps packets with specific CoS or DSCP markings to an egress queue?
- A. Classification for ingress traffic
- B. Queuing for egress traffic
- C. Marking for ingress traffic
- D. Rate limiting for egress traffic
正解：A
質問 # 16
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?
- A. Enable the FortiLink setting on FortiSwitch before the authorization process.
- B. Use a migration tool based on Python script to convert the configuration.
- C. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.
- D. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
正解：D
質問 # 17
Exhibit.
Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)
- A. These two routes are available in the hardware routing table.
- B. These two routes have a higher administrative distance value available to the destina-tion networks.
- C. These two routes will become primary, if the best routes are removed.
- D. These two routes will be used as load-balancing routes.
正解：B、C
質問 # 18
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. STP triggered a loop and applied loop guard protection on port1.
- B. Loop guard frame sourced from port 1 was received VLAN 10 ports.
- C. An endpoint sent BPDU on port1 it received from another interface.
- D. Oport1 was shut down by loop guard protection.
正解：B、D
質問 # 19
Refer to the exhibits
Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch.
Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)
- A. Add the MAC address of PCI as a member of VLAN 10.
- B. Remove VLAN 10 from the allowed VLANs and add it to untagged VLANs on port1.
- C. Add VLAN ID 10 as a member of the untagged VLANs on port1.
- D. Enable Private VLAN on VLAN 10 and add VLAN 20 as an isolated VLAN.
正解：A、C
質問 # 20
How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?
- A. Classifiers enable matching traffic based only on the VLAN ID.
- B. FortiSwitch checks ACL policies only from top to bottom.
- C. Only high-end FortiSwitch models support ACL.
- D. ACL can be used only at the prelookup stage in the traffic processing pipeline.
正解：B
質問 # 21
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
- A. All devices connecting to FortiSwitch must support 802.1X authentication.
- B. A security policy is used to apply 802.1 authentication on a port.
- C. All hosts behind an authenticated port are allowed access after a successful authentica-tion.
- D. A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.
正解：B、C
質問 # 22
Refer to the diagnostic output:
Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?
- A. It is a MAC address of FortiLink interface on FortiGate.
- B. It is a MAC address of FortiGate in HA configuration.
- C. It is a MAC address of a switch that accepts multiple VLANs.
- D. It is a MAC address of an upstream FortiSwitch.
正解：C
質問 # 23
Which two statements about VLAN assignments on FortiSwitch ports are true? (Choose two.)
- A. Assign an IP address and subnet mask to FortiSwitch VLANs
- B. Configure a native VLAN on the FortiLink
- C. Only assign one native VLAN on a port
- D. Assign untagged VLANs using FortiGate CLI
正解：C、D
質問 # 24
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. A standalone switch with the shown serial number is connected on port23.
- B. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- C. port23 is configured as the dedicated management interface.
- D. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
正解：A
質問 # 25
Which statement about the configuration of VLANs on a managed FortiSwitch port is true?
- A. FortiSwitch VLAN interfaces are created only when FortiSwitch is managed by Forti-Gate.
- B. Untagged VLANs must be part of the allowed VLANs: ingress and egress.
- C. The native VLAN is implicitly part of the allowed VLAN on the port.
- D. Allowed VLANS expand the collision domain to the port.
正解：C
質問 # 26
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?
- A. The monitoring device must be connected to the same switch where the traffic is being mirrored
- B. Traffic on the management interface can be mirrored and captured by the monitoring device.
- C. Mirrored traffic can be sent across multiple switches.
- D. SPAN can be configured only on a standalone FortiSwitch.
正解：B
質問 # 27
......
最新のNSE6_FSW-7.2実際の無料試験問題は更新された56問があります：https://www.goshiken.com/Fortinet/NSE6_FSW-7.2-mondaishu.html
検証済みNSE6_FSW-7.2問題集PDF資料 [2024年更新]：https://drive.google.com/open?id=1zo6sLVjC7C7-NzE9XazEIXKjuJaskiWt