無料NetApp NCDA ONTAP NS0-162究極の学習ガイド（更新された92問あります)
トップクラスのNS0-162練習試験問題
質問 # 23
Exhibit
After creating a new LIF called datalif1 on SVM vs0, you notice connectivity issues to the newly created LIF, as shown In the exhibit. You have verified that the new LIF Is online and the network team is able to see the MAC address on the switches.
Referring to the exhibit, what would cause connectivity Issues?
- A. The netmask needs to be modified to a /16 network.
- B. The route metric needs to be modified to a metric of 30.
- C. The route needs to be modified to reflect the correct gateway.
- D. The home port needs to be modified to port e0d.
正解：D
質問 # 24
After attempting to perform an ONTAP upgrade. It falls during the pre-check. In this scenario, what would cause this problem?
- A. offline volume
- B. encrypted volumes
- C. Idle SnapMirrors
- D. offline data LIF
正解：C
質問 # 25
Your ONTAP cluster serves data and backup traffic running on the same physical port. You must isolate backup traffic from your production network traffic.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Create IPspaces.
- B. Create a broadcast domain.
- C. Create a namespace.
- D. Create a VLAN.
正解：B、D
質問 # 26
Which two protocols does ALUA support on an ONTAP cluster? (Choose two.)
- A. NVMe
- B. NFS
- C. iSCSI
- D. FCP
正解：C、D
質問 # 27
Click the Exhibit button.
Referring to the exhibit, what are two reasons why no initiators are displayed in the initiators' igroup screen? (Choose two.)
- A. ALUA has not been enabled on the NetApp controllers.
- B. SLM has not been enabled.
- C. The server has not been powered up.
- D. Zoning on the switches has been done incorrectly.
正解：C、D
質問 # 28
Click the Exhibit button.
Referring to the exhibit, which volume has a snap reserve value set to zero (0)?
- A. netapp_no1
- B. netapp_esx
- C. netapp_lnx_mi
- D. netapp_esx_m1
正解：C
質問 # 29
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Set the user permission for the share to write.
- B. Allow the file type *, rtf In the CIFS Server fpolicy.
- C. Let the user save the file to a writeable location.
- D. Synchronize the ONTAP Cluster time to the Active Directory time.
正解：C
質問 # 30
Exhibit
You have a 2-node FAS8300 switchless cluster. You ran the performance capacity report to see the last hour of performance
Referring to the exhibit, which two statements describe the performance? (Choose two.)
- A. The CPU has been underutilized.
- B. A storage failover event will cause performance issues.
- C. The CPU has been over utilized.
- D. A storage failover event will have no performance degradation.
正解：B、C
質問 # 31
Which two statements are true about NVMe? (Choose two.)
- A. NQNs are added to namespaces.
- B. LUNs are mapped to Initiator groups.
- C. NQNs are added to subsystems.
- D. Namespaces are mapped to subsystems.
正解：C、D
質問 # 32
Exhibit
You need to provision a new NFS datastore for a vSphere cluster. You configure a new SVM and a new volume on your ONTAP cluster. You successfully mount the datastore to your vSphere cluster. You are able to upload and download a test 1 KB file to and from the datastore. You can also successfully ping the NFS LIF (192.168.106.11) from the vSphere hosts without any packet loss. However, you are unable to upload ISO Images or migrate VMs to the new datastore.
Referring to the exhibit, which action would correct the problem?
- A. Enable jumbo frames on the network switches.
- B. Add a default gateway to the SVM.
- C. Migrate the LIF to Its home port.
- D. Change the MTU of the VM kernel ports on the vSphere hosts to 9,000 bytes.
正解：A
質問 # 33
Click the Exhibit button.
A customer has zoned switches to a host, but the host cannot see the LUNs.
Referring to the exhibit, what needs to be done to make the LUNs visible to the host?
- A. Ports on tme-a700 nodes 1 and 2 should have the fc_nvme protocol removed.
- B. The customer should remove the switches and directly connect the host to the controller ports.
- C. Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.
- D. Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.
正解：C
質問 # 34
Click the Exhibit button.
The exhibit shows a Windows 2019 server with two FC HBAs using ALUA.
How many paths to LUN1 are active/optimized?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 35
After creating several volumes, you notice that the hosting aggregates Immediately show a decrease In available space. Which volume setting would prevent this outcome?
- A. space guarantee set to "none"
- B. space SLO set to "semi-thick"
- C. space guarantee set to "volume"
- D. space SLO set to "thick"
正解：B
質問 # 36
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)
- A. Use XCP to copy data from a FlexVol to a FlexGroup.
- B. Use SnapMirror to replicate data from FlexVol to FlexGroup.
- C. You can convert the FlexVol volume to a FlexGroup volume.
- D. A FlexVol to FlexGroup conversion is not supported.
正解：A、D
質問 # 37
On FAS systems, FlexCache volumes are typically used for which type of workload?
- A. read-intensive SAN workloads
- B. write-intensive NAS workloads
- C. read-intensive NAS workloads
- D. write-intensive SAN workloads
正解：C
質問 # 38
Click the Exhibit button.
You have a Linux host that is unable to access the namespace shown in the exhibit.
What is causing the problem?
- A. Additional LIFs are required to support the Linux host.
- B. The block size must be 8 KB to support the Linux host filesystem.
- C. A subsystem containing the Linux host's NQN must be provisioned.
- D. Additional NVMe namespaces are required for the Linux host.
正解：C
質問 # 39
......
合格させるNetwork Appliance NS0-162試験問題でテスト復刻エンジンとPDF：https://www.goshiken.com/NetworkAppliance/NS0-162-mondaishu.html
実際問題を使ってNS0-162問題集無料サンプル問題と練習テストエンジン：https://drive.google.com/open?id=1g2Jcuw4is_jNXVyyhN0d6Yll7tc3HAH1