2023年最新の100%試験高合格率NS0-162問題集PDF [Q30-Q50]

Share

2023年最新の100%試験高合格率NS0-162問題集PDF

合格させる試験完全版NS0-162問題集92解答


ネットワークアプライアンスNS0-162（NetApp認定データ管理者、ONTAP）認定試験は、NetAppストレージシステムを扱うプロフェッショナルのスキルと知識をテストするために設計されています。この認定は、NetAppテクノロジーを使用してデータストレージ環境を管理および維持する専門家の専門知識を示したい個人に最適です。この試験は、NetAppストレージソリューションを実装およびサポートする責任があるITプロフェッショナルを対象としています。

 

質問 # 30
Click the Exhibit button.
A customer has zoned switches to a host, but the host cannot see the LUNs.
Referring to the exhibit, what needs to be done to make the LUNs visible to the host?

  • A. Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.
  • B. Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.
  • C. Ports on tme-a700 nodes 1 and 2 should have the fc_nvme protocol removed.
  • D. The customer should remove the switches and directly connect the host to the controller ports.

正解：A


質問 # 31
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.)

  • A. data
  • B. cluster
  • C. node
  • D. admin

正解：C、D


質問 # 32
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task? (Choose three.)

  • A. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
  • B. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
  • C. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
  • D. Enable jumbo frames with an MTU of 9216 for your switches.
  • E. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

正解：B、C、D


質問 # 33
Click the Exhibit button.
Only the hosts that are on the 10.1.100.0/24 network can access CIFS shares on SVM lab-fs1.
Referring to the exhibit, what would you do to allow hosts on other networks to access lab-fs1?

  • A. Create a SVM default route for 10.1.100.1.
  • B. Increase the metric of the route with gateway 10.1.100.1.
  • C. Delete the route with gateway 192.168.106.1.
  • D. Decrease the metric of the route with gateway 10.1.100.1.

正解：A


質問 # 34
Click the Exhibit button.
The volumes shown in the exhibit, vol1 and vol2, are in the same AFF aggregate. You write the same large 100 GB file to both vol1 and vol2.
Based on the volume efficiency settings, which action occurs?

  • A. The files are deduplicated at the aggregate level.
  • B. The files are queued for a background deduplication schedule.
  • C. The files are deduplicated at the volume level.
  • D. The files are deduplicated at the SVM level by SVM1.

正解：C


質問 # 35
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?

  • A. IPspaces
  • B. broadcast domains
  • C. ONTAP subnets
  • D. VLANs

正解：B


質問 # 36
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)

  • A. Active IQ Config Advisor
  • B. ONTAP System Manager
  • C. ONTAP CLI
  • D. Active IQ Unified Manager

正解：A、B


質問 # 37
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task?
(Choose three.)

  • A. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
  • B. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
  • C. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
  • D. Enable jumbo frames with an MTU of 9216 for your switches.
  • E. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

正解：B、C、D


質問 # 38
What establishes a quorum in a 4-node cluster?

  • A. ONTAP Mediator
  • B. epsilon
  • C. TieBreaker
  • D. cluster peer

正解：B


質問 # 39
You have two ONTAP clusters and are setting up a new SnapMirror SVM replication (SVM DR) relationship. Which two statements are true in this scenario? (Choose two.)

  • A. The source SVM subtype must be default.
  • B. The target SVM subtype must be sync-destination.
  • C. The source SVM subtype must be sync-source.
  • D. The target SVM subtype must be dp-destination.

正解：B、C


質問 # 40
Which statement Is correct about Temperature Sensitive Storage Efficiency (TSSE)?

  • A. TSSE operations on a AFF array are automatically throttled depending on whether data Is hot or cold.
  • B. TSSE operations on ONTAP Select are automatically throttled depending on whether data is hot or cold.
  • C. TSSE operations on Cloud Volumes ONTAP are automatically throttled depending on whether data is hot or cold.
  • D. TSSE Is enabled automatically on newly created thick provisioned volumes.

正解：A

解説：
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUID-65F2062F-DD7B-4262-A3D6-12C68775833A.html


質問 # 41
Which statement Is correct about Temperature Sensitive Storage Efficiency (TSSE)?

  • A. TSSE operations on Cloud Volumes ONTAP are automatically throttled depending on whether data is hot or cold.
  • B. TSSE operations on a AFF array are automatically throttled depending on whether data Is hot or cold.
  • C. TSSE Is enabled automatically on newly created thick provisioned volumes.
  • D. TSSE operations on ONTAP Select are automatically throttled depending on whether data is hot or cold.

正解：D


質問 # 42
Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

  • A. NVMe is not licensed on the cluster.
  • B. NVMe Is not configured for the SVM.
  • C. FC switch zoning has not been done correctly.
  • D. FC has not been licensed on the cluster.

正解：B


質問 # 43
What are two ideal use cases for FlexCache volumes? (Choose two.)

  • A. Web hosting
  • B. media rendering
  • C. write-heavy workloads at the cache
  • D. virtualization workloads

正解：A、B


質問 # 44
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)

  • A. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
  • B. The latest available Images will appear In the ONTAP System Manager interface.
  • C. The update history is available within the ONTAP System Manager interface.
  • D. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.

正解：B、C


質問 # 45
Click the Exhibit button.
You are unable to mount an NFS volume named vol1.
Referring to the exhibit, what Is the reason for the mount failure?

  • A. The 0.0.0.0/0 client match did not match the subnet of the NFS client.
  • B. The vol1 volume did not have an export policy rule.
  • C. The svm_root volume did not have an export policy rule.
  • D. The vol1 volume is not mounted to the namespace.

正解：B


質問 # 46
Click the Exhibit button.
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?

  • A. Add the vSphere host's IP addresses to an export policy rule.
  • B. Activate all NFS protocol versions in your SVM.
  • C. Set the MTU size for the data LIF to 9000.
  • D. Change the volume security style to UNIX.

正解：D


質問 # 47
Exhibit.

You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)

  • A. ONTAP reports the volume as 10% full.
  • B. ONTAP reports that the volume Is using 10 GB of Its containing aggregate.
  • C. ONTAP reports the volume as 20% full.
  • D. ONTAP reports that the volume Is using 100 GB of its containing aggregate.

正解：A、B


質問 # 48
After deploying an AFF A400, you want to deploy a storage virtual machine (SVM) to serve SMB dat a. Which three conditions must exist in this scenario? (Choose three.)

  • A. You must have encryption enabled on the root volume.
  • B. You must have sufficient space for the root volume.
  • C. You must have a non-root aggregate in the online state.
  • D. You must have configured the export policies.
  • E. You must synchronize the cluster time.

正解：B、D、E


質問 # 49
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)

  • A. Set a password for (the vsadmin user account.
  • B. Create a LIF for SVM management.
  • C. Configure role-based access control (RBAC) for the vsadmin user account.
  • D. Create the vsadmin user account in the new SVM.

正解：A、D


質問 # 50
......

検証済みNS0-162問題集で問題と解答100%合格GoShiken：https://www.goshiken.com/NetworkAppliance/NS0-162-mondaishu.html

合格させるNS0-162試験一発合格保証2023問題集：https://drive.google.com/open?id=1Zd545Rfr3K-ZxW49cOlqL1f9L2SWAok9

関するブログ

もっと
NS0-162無料問題集