究極のガイドは2V0-41.24最新2025年02月25日時間限定！今すぐダウンロード！
2025年最新のな厳密検証された合格させる2V0-41.24試験にはリアル問題と解答
質問 # 36
What are two valid BGP Attributes that can be used to influence the route path traffic will take?
(Choose two.)
- A. Cost
- B. BFD
- C. MED
- D. AS-Path Prepend
正解：C、D
解説：
AS-Path Prepend: This attribute allows you to prepend one or more AS numbers to the AS path of a route, making it appear longer and less preferable to other BGP routers. You can use this attribute to manipulate the inbound traffic from your BGP peers by advertising a longer AS path for some routes and a shorter AS path for others.
MED: This attribute stands for Multi-Exit Discriminator and allows you to specify a preference value for a route among multiple exit points from an AS. You can use this attribute to manipulate the outbound traffic to your BGP peers by advertising a lower MED value for some routes and a higher MED value for others.
質問 # 37
Which NSX CLI command is used to change the authentication policy for local users?
- A. set hardening-policy
- B. set cli-timeout
- C. get auth-policy minimum-password-length
- D. set auth-policy
正解：D
解説：
The set auth-policy command in the NSX CLI is used to configure the authentication policy for local users. This command allows administrators to adjust settings related to password policies, lockout policies, and other authentication-related parameters for local user accounts on NSX Manager.
質問 # 38
What are three NSX Manager roles? (Choose three.)
- A. master
- B. policy
- C. zookeeper
- D. controller
- E. manager
- F. cloud
正解：A、C、D
解説：
master: The master role in NSX Manager is responsible for managing and coordinating the other NSX Manager nodes in the cluster.
policy: The policy role handles the policy-driven API and configuration, allowing administrators to define and manage network and security policies.
controller: The controller role in NSX Manager manages control plane functions and handles routing, switching, and other network state information required for NSX operations.
質問 # 39
Which two of the following features are supported for the Standard NSX Application Platform Deployment? (Choose two.)
- A. NSX Intelligence
- B. NSX Malware Prevention Metrics
- C. NSX Intrusion Detection and Prevention
- D. NSX Network Detection and Response
- E. NSX Intrinsic Security
正解：B、D
解説：
The NSX Application Platform Deployment features are divided into three form factors: Evaluation, Standard, and Advanced. Each form factor determines which NSX features can be activated or installed on the platform1. The Evaluation form factor supports only NSX Intelligence, which provides network visibility and analytics for NSX-T environments2. The Standard form factor supports both NSX Intelligence and NSX Network Detection and Response, which provides network threat detection and response capabilities for NSX-T environments3. The Advanced form factor supports all four features:
NSX Intelligence, NSX Network Detection and Response, NSX Malware Prevention, and NSX Metrics1.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/nsx-application-platform/GUID-85CD2728-
8081-45CE-9A4A-D72F49779D6A.html
質問 # 40
Which of the following exist only on Tler-1 Gateway firewall configurations and not on Tier-0?
- A. Actions
- B. Profiles
- C. Applied To
- D. Sources
正解：B
質問 # 41
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. esxcli system syslog config logger set --id=nsxmanager
- C. get support-bundle file vcpnv.tgz
- D. vm-support
正解：C
解説：
When the NSX UI is inaccessible, an NSX administrator can use the get support-bundle file vcpnv.tgz command in the CLI on the NSX Manager to generate a support bundle. This command creates a compressed file (vcpnv.tgz) containing logs and diagnostic information needed for troubleshooting.
質問 # 42
Which three security features are dependent on the NSX Application Platform? (Choose three.)
- A. NSX Intelligence
- B. NSX Firewall
- C. NSX Malware Prevention
- D. NSX Network Detection and Response
- E. NSX Distributed IDS/IPS
- F. NSX TLS Inspection
正解：A、C、D
質問 # 43
Which three DHCP Services are supported by NSX? (Choose three.)
- A. Port DHCP per VNF
- B. DHCP Relay
- C. VRF DHCP Server
- D. Segment DHCP
- E. Gateway DHCP
正解：B、D、E
解説：
Gateway DHCP: NSX supports DHCP services configured on the gateway, allowing it to provide IP addresses to clients within the network.
Segment DHCP: NSX can provide DHCP services at the segment level, where DHCP is configured directly on a network segment to assign IP addresses to connected clients.
DHCP Relay: NSX supports DHCP Relay, which allows forwarding of DHCP requests to an external DHCP server for IP address assignment.
質問 # 44
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?
- A. Layer 2 VPN
- B. Layer 2 broadcast domain
- C. Layer 2 bridge
- D. Layer 3 route
正解：B
解説：
When two virtual machines are connected on the same overlay segment, they are part of the same Layer 2 broadcast domain. In this case, the communication between the two VMs is happening within the same broadcast domain, which means that broadcast traffic can be sent to all devices on the segment. Since the ping is successful, the two VMs can communicate directly over Layer 2 without needing routing.
質問 # 45
DRAG DROP
Match the NSX Intelligence recommendations with their correct purpose.
正解：
解説：
Explanation:
Security policy recommendations: Are East-West distributed firewall (DFW) security policies in the application category12.
Security group recommendations: Are VMs or physical servers whose traffic flows were analyzed for the time period and the boundary you had specified12.
Service recommendations: Are service objects that were used by applications in the VMs or physical servers that you had specified, but the services are not yet defined in the NSX inventory12.
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.1/user-guide/GUID-BA3B0D67-4AA8-439E- A845-4598DAD6B9D0.html
質問 # 46
Which three selections are capabilities of Network Topology? (Choose three.)
- A. Display how the Physical components ate interconnected.
- B. Display the uplink configured on the Tier-0 Gateways.
- C. Display the uplinks configured on the Tier-1 Gateways.
- D. Display the VMs connected to Segments.
- E. Display how the different NSX components are interconnected.
正解：B、D、E
解説：
According to the VMware NSX Documentation, these are three of the capabilities of Network Topology, which is a graphical representation of your network infrastructure in NSX:
Display how the different NSX components are interconnected: You can use Network Topology to view how your segments, gateways, routers, firewalls, load balancers, VPNs, and other NSX components are connected and configured in your network.
Display the uplink configured on the Tier-0 Gateways: You can use Network Topology to view the uplink interface and segment that connect your tier-0 gateways to your physical network. You can also view the VLAN ID and IP address of the uplink interface.
Display the VMs connected to Segments: You can use Network Topology to view the VMs that are attached to your segments. You can also view the IP address and MAC address of each VM.
https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-A75B2553-7595-40B9-A902-
854941BB06FD.html
質問 # 47
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.
What two are the prerequisites for this configuration? (Choose two.)
- A. All nodes must be in separate subnets.
- B. A compute manager must be configured.
- C. NSX Manager must reside on a Windows Server.
- D. The cluster configuration must be completed using API.
- E. All nodes must be in the same subnet.
正解：B、E
解説：
For a 3-node NSX Manager cluster, all nodes must be within the same subnet to ensure proper communication and functionality between them.
A compute manager must be configured before adding nodes to the cluster, as it provides the necessary integration between the NSX Manager and the underlying virtualization infrastructure (such as vSphere or vCenter).
質問 # 48
Which two logical router components span across all transport nodes? (Choose two.)
- A. TIERO_DISTRI BUTE D_ ROUTER
- B. DISTRIBUTED_R0UTER_TIER1
- C. SFRVICE_ROUTER_TJER0
- D. SERVICE_ROUTER_TIERl
- E. DISTRIBUTED_ROUTER_TIER0
正解：B、E
解説：
https://docs.vmware.com/en/VMware-Validated-Design/5.0.1/com.vmware.vvd.sddc-nsxt- design.doc/GUID-74141ABD-C9AF-4A92-8338-092CD67EB56E.html
https://www.hydra1303.com/nsx-t-routing-part-
i#:~:text=Logical%20routing%20in%20NSX%2DT,using%20static%20routes%20or%20BGP.
https://www.delltechnologies.com/asset/en-us/products/converged-infrastructure/technical- support/docu96042.pdf
質問 # 49
Which two statements are true about IDS Signatures? (Choose two.)
- A. Users can upload their own IDS signature definitions.
- B. An IDS signature contains data used to identify the creator of known exploits and vulnerabilities.
- C. IDS signatures can be High Risk, Suspicious, Low Risk and Trustworthy.
- D. An IDS signature contains data used to identify known exploits and vulnerabilities.
- E. An IDS signature contains a set of instructions that determine which traffic is analyzed.
正解：D、E
解説：
According to the Network Bachelor article1, an IDS signature contains data used to identify an attacker's attempt to exploit a known vulnerability in both the operating system and applications. This implies that statement B is true. According to the VMware NSX Documentation2, IDS/IPS Profiles are used to group signatures, which can then be applied to select applications and traffic. This implies that statement E is true. Statement A is false because users cannot upload their own IDS signature definitions, they have to use the ones provided by VMware or Trustwave3. Statement C is false because an IDS signature does not contain data used to identify the creator of known exploits and vulnerabilities, only the exploits and vulnerabilities themselves. Statement D is false because IDS signatures are classified into one of the following severity categories: Critical, High, Medium, Low, or Informational1.
Reference:
https://docs.vmware.com/en/VMware-SD-WAN/5.4/VMware-SD-WAN-Administration-Guide/GUID-0BB81F8D-70EB-42D4-ABAF-F80C8F77A4CB.html
質問 # 50
Which steps are required to activate Malware Prevention on the NSX Application Platform?
- A. Select Cloud Region and run Pre-checks.
- B. Activate NSX Network Detection and Response and Deploy Malware Prevention.
- C. Select Cloud Region and Deploy Network Detection and Response.
- D. Activate NSX Network Detection and Response and run Pre-checks.
正解：A
解説：
To activate Malware Prevention on the NSX Application Platform, the steps are:
In the NSX Manager UI, select System and in the Configuration section, select NSX Application Platform.
Navigate to the Features section, locate the NSX Malware Prevention feature card, and click Activate or anywhere in the card.
In the NSX Malware Prevention activation window, select one of the available cloud regions from which you can access the NSX Advanced Threat Prevention cloud service.
Click Run Prechecks. This precheck process can take some time as the system validates that the minimum license requirement is met and that it is eligible for use with the NSX Advanced Threat Prevention cloud service. The system also validates that the selected cloud region is reachable.
Click Activate. This step can take some time1. Therefore, the correct answer is D. The other options are incorrect because they involve activating or deploying NSX Network Detection and Response, which is a different feature from Malware Prevention. Reference: Activate NSX Malware Prevention
質問 # 51
Which two statements are correct about East-West Malware Prevention? (Choose two.)
- A. NSX Edge nodes must have Internet access.
- B. NSX Application Platform must have Internet access.
- C. An agent must be installed on every ESXi host.
- D. An agent must be installed on every NSX Edge node.
- E. A SVM is deployed on every ESXi host.
正解：B、E
質問 # 52
Which two are supported by L2 VPN clients? (Choose two.)
- A. NSX for vSphere Edge
- B. 3rd party Hardware VPN Device
- C. NSX Autonomous Edge
- D. NSX Edge
正解：C、D
解説：
The following L2 VPN clients are recommended:
1. NSX Managed NSX Edge in a separate NSX Managed environment.
* Overlay and VLAN segments can be extended.
2. Autonomous Edge:
* Enables L2 VPN access from a non-a NSX environment to NSX environments.
* Deployed by using an OVF file on a host that is not managed by NSX.
* Only VLAN segments can be extended.
質問 # 53
......
VMware 2V0-41.24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
問題集全額返金保証付き！2V0-41.24問題公式問題集：https://www.goshiken.com/VMware/2V0-41.24-mondaishu.html
厳密検証された2V0-41.24試験問題集PDF[2025年最新] 時間限定無料アクセスGoShiken：https://drive.google.com/open?id=1yOyVkiVNFC0mHg6rggPS60Kf-qKZAIxK