2025年最新の実際に出ると確認された2V0-41.24試験問題集と解答で2V0-41.24無料更新
実際問題を使って2V0-41.24問題集で100%無料2V0-41.24試験問題集
VMware 2V0-41.24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 69
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. IPF1X
- C. Switch Visualization
- D. Port Mirroring
正解：C
解説：
Switch Visualization in the NSX UI provides a clear mapping between virtual NICs (vNICs) and the physical adapters on the host. This feature allows administrators to see how virtual network interfaces connect to the underlying physical network infrastructure, which is essential for troubleshooting connectivity issues on transport nodes.
質問 # 70
What are two valid BGP Attributes that can be used to influence the route path traffic will take? (Choose two.)
- A. BFD
- B. AS-Path Prepend
- C. Cost
- D. MED
正解：B、D
解説：
AS-Path Prepend: This attribute allows you to prepend one or more AS numbers to the AS path of a route, making it appear longer and less preferable to other BGP routers. You can use this attribute to manipulate the inbound traffic from your BGP peers by advertising a longer AS path for some routes and a shorter AS path for others.
MED: This attribute stands for Multi-Exit Discriminator and allows you to specify a preference value for a route among multiple exit points from an AS. You can use this attribute to manipulate the outbound traffic to your BGP peers by advertising a lower MED value for some routes and a higher MED value for others.
質問 # 71
What is VMware's recommendation for the minimum MTU requirements when planning an NSX deployment?
- A. MTU should be set to 1550 or less across the data center network including inter-data center connections.
- B. Configure Path MTU Discovery and rely on fragmentation.
- C. MTU should be set to 1500 or less only on inter-data center connections.
- D. MTU should be set to 1700 or greater across the data center network including inter-data center connections.
正解：D
解説：
VMware recommends setting the MTU (Maximum Transmission Unit) to 1700 or greater for NSX deployments. This is to ensure that the VXLAN encapsulation, which adds overhead to the original Ethernet frame, can be accommodated without fragmentation. This MTU requirement includes the entire data center network, including inter-data center connections, to ensure consistent communication across all network components involved in the NSX deployment.
質問 # 72
Which two statements are true for IPSec VPN? (Choose two.)
- A. IPSec VPNs use the DPDK accelerated performance library.
- B. Dynamic routing Is supported for any IPSec mode In NSX.
- C. VPNs can be configured on the command line Interface on the NSX manager.
- D. IPSec VPN services can be configured at Tler-0 and Tler-1 gateways.
正解：A、D
解説：
According to the VMware NSX 4.x Professional documents and tutorials, IPSec VPN secures traffic flowing between two networks connected over a public network through IPSec gateways called endpoints. NSX Edge supports a policy-based or a route-based IPSec VPN. Beginning with NSX-T Data Center 2.5, IPSec VPN services are supported on both Tier-0 and Tier-1 gateways1. NSX Edge also leverages the DPDK accelerated performance library to optimize the performance of IPSec VPN2.
https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-7D9F7199-E51B-478B-A8BC-
58AD5BBAA0F6.html
質問 # 73
Which two logical router components span across all transport nodes? (Choose two.)
- A. TIERO_DISTRI BUTE D_ ROUTER
- B. DISTRIBUTED_ROUTER_TIER0
- C. DISTRIBUTED_R0UTER_TIER1
- D. SFRVICE_ROUTER_TJER0
- E. SERVICE_ROUTER_TIERl
正解：B、C
解説：
https://docs.vmware.com/en/VMware-Validated-Design/5.0.1/com.vmware.vvd.sddc-nsxt- design.doc/GUID-74141ABD-C9AF-4A92-8338-092CD67EB56E.html
https://www.hydra1303.com/nsx-t-routing-part-
i#:~:text=Logical%20routing%20in%20NSX%2DT,using%20static%20routes%20or%20BGP.
https://www.delltechnologies.com/asset/en-us/products/converged-infrastructure/technical- support/docu96042.pdf
質問 # 74
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Local AS
- B. BGP Neighbors
- C. Route Aggregation
- D. Graceful Restart
- E. Route Distribution
正解：B、C
解説：
Route Aggregation and and D) BGP neighbours are available when configuring BGP in a VRF. "Route distribution" does not exist, what you can do is a "Route Re-Distribution" via BGP.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-4CB5796A-1CED-4F0E-ADE0-
72BF7B3F762C.html
質問 # 75
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout disabled
- B. set cli-timeout 1
- C. set cli-timeout 0
- D. set cli-timeout enabled
正解：C
解説：
Setting the cli-timeout value to 0 disables the CLI timeout on NSX Manager, preventing the nsxcli session from timing out due to inactivity. This ensures that the session remains active indefinitely until manually closed.
質問 # 76
Which field in a Tier-1 Gateway Firewall would be used to allow access for a collection of trustworthy web sites?
- A. Profiles -> L7 Access Profile
- B. Profiles -> Context Profiles
- C. Destination
- D. Source
正解：A
解説：
The field in a Tier-1 Gateway Firewall that would be used to allow access for a collection of trustworthy web sites is Profiles -> L7 Access Profile. This field allows the user to create a Layer 7 access profile that defines a list of allowed or blocked URLs based on categories, reputation, or custom entries1. The user can then apply the L7 access profile to a firewall rule to control the traffic based on the URL filtering criteria1. The other options are incorrect because they are not related to URL filtering. The Source field specifies the source IP address or group of the firewall rule1. The Destination field specifies the destination IP address or group of the firewall rule1. The Profiles -> Context Profiles field allows the user to create a context profile that defines a list of application signatures or attributes that can be used to identify and classify network traffic1. Reference: Gateway Firewall
質問 # 77
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. esxcli network diag ping -I vmk0O -H <destination IP address>
- B. esxcli network diag ping -H <destination IP address>
- C. vmkping ++netstack=vxlan -d -s 1572 <destination IP address>
- D. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
正解：D
解説：
The command vmkping ++netstack=geneve -d -s 1572 <destination IP address> is used to check the VMware kernel ports for tunnel end point communication. This command uses the geneve netstack, which is the default netstack for NSX-T. The -d option sets the DF (Don't Fragment) bit in the IP header, which prevents the packet from being fragmented by intermediate routers. The -s
1572 option sets the packet size to 1572 bytes, which is the maximum payload size for a geneve encapsulated packet with an MTU of 1600 bytes. The <destination IP address> is the IP address of the remote ESXi host or VM.
Reference: : VMware NSX-T Data Center Installation Guide, page 19. : VMware Knowledge Base:
Testing MTU with the vmkping command (1003728). : VMware NSX-T Data Center Administration Guide, page 102.
質問 # 78
Where does an administrator configure the VLANs used in VRF Lite? (Choose two.)
- A. segment connected to the Tier-1 gateway
- B. uplink trunk segment
- C. uplink interface of the VRF gateway
- D. uplink interface of the default Tier-0 gateway
正解：A、C
解説：
The VLANs used in VRF Lite are configured on the uplink interface of the VRF gateway, which enables traffic segmentation and routing within the VRF context.
The uplink trunk segment is where multiple VLANs can be configured and tagged, allowing them to be used by the VRF Lite setup for routing and segmentation across the network.
質問 # 79
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
- A. esxcli network ip interface ipv4 get
- B. esxcfg-nics -1l
- C. net-dvs
- D. esxcli network nic list
- E. esxcfg-vmknic -1
正解：A、D
解説：
https://docs.vmware.com/jp/VMware-NSX/4.1/installation/GUID-B7E7371E-A9F6-4880-B184- E00A62C0C818.html
質問 # 80
Which two tools are used for centralized logging in VMware NSX? (Choose two.)
- A. Syslog Server
- B. VMware Aria Operations for Logs
- C. VMware Aria Operations for Networks
- D. VMware Aria Operations
- E. VMware Aria Automation
正解：A、B
解説：
Two tools that are used for centralized logging in VMware NSX are Syslog Server and VMware Aria Operations for Logs. Syslog Server is a standard protocol for sending log messages from various network devices to a centralized server1. VMware NSX supports syslog for long term retention of logs and all NSX components can send syslog messages to a configured syslog server2. VMware Aria Operations for Logs is a VMware product that provides intelligent log analytics for NSX3. It provides monitoring and troubleshooting capabilities and customizable dashboards for network virtualization, flow analysis, and alerts3. The other options are incorrect because they are not tools for centralized logging in VMware NSX. VMware Aria Operations is a VMware product that provides operations management and automation for NSX4, but it is not the same as VMware Aria Operations for Logs. VMware Aria Automation is a VMware product that provides automation and orchestration for NSX5, but it is not related to logging. VMware Aria Operations for Networks is not a valid product name.
Reference: Syslog, NSX Logging and System Events, VMware vRealize Log Insight for NSX, VMware vRealize Operations Management Pack for NSX, VMware vRealize Automation
質問 # 81
Where in the NSX UI would an administrator set the time attribute for a time-based Gateway Firewall rule?
- A. The option to set time based rule is a field in the rule Itself.
- B. The option to set time-based rule is a clock Icon in the policy.
- C. The option to set time-based rule is a clock Icon in the rule.
- D. There Is no option in the NSX UI. It must be done via command line interface.
正解：B
解説：
According to the VMware documentation1, the clock icon appears on the firewall policy section that you want to have a time window. By clicking the clock icon, you can create or select a time window that applies to all the rules in that policy section. The other options are incorrect because they either do not exist or are not related to the time-based rule feature. There is no option to set a time-based rule in the rule itself, as it is a policy-level setting. There is also an option to set a time-based rule in the NSX UI, so it does not require using the command line interface.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-8572496E-A60E-48C3-A016-
4A081AC80BE7.html
質問 # 82
Which three selections are capabilities of Network Topology? (Choose three.)
- A. Display the uplink configured on the Tier-0 Gateways.
- B. Display how the different NSX components are interconnected.
- C. Display how the Physical components ate interconnected.
- D. Display the uplinks configured on the Tier-1 Gateways.
- E. Display the VMs connected to Segments.
正解：A、B、E
解説：
According to the VMware NSX Documentation, these are three of the capabilities of Network Topology, which is a graphical representation of your network infrastructure in NSX:
Display how the different NSX components are interconnected: You can use Network Topology to view how your segments, gateways, routers, firewalls, load balancers, VPNs, and other NSX components are connected and configured in your network.
Display the uplink configured on the Tier-0 Gateways: You can use Network Topology to view the uplink interface and segment that connect your tier-0 gateways to your physical network. You can also view the VLAN ID and IP address of the uplink interface.
Display the VMs connected to Segments: You can use Network Topology to view the VMs that are attached to your segments. You can also view the IP address and MAC address of each VM.
https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-A75B2553-7595-40B9-A902-
854941BB06FD.html
質問 # 83
Which two tools are used for centralized logging in VMware NSX? (Choose two.)
- A. Sysloq Server
- B. VMware Aria Operations for Logs
- C. VMware Aria Operations for Networks
- D. VMware Aria Operations
- E. VMware Aria Automation
正解：A、B
解説：
Syslog Server: NSX supports forwarding logs to a centralized syslog server, which is a standard tool for centralized logging in network environments.
VMware Aria Operations for Logs (formerly known as vRealize Log Insight): This tool provides centralized log management and analytics, specifically designed to integrate with VMware environments, including NSX, for enhanced log collection, analysis, and troubleshooting.
質問 # 84
A company security policy requires all users to log Into applications using a centralized authentication system.
Which two authentication, authorization, and accounting (AAA) systems are available when Integrating NSX with VMware Identity Manager? (Choose two.)
- A. SecureDAP
- B. RSA SecurelD
- C. RADII 2.0
- D. LDAP and OpenLDAP based on Active Directory (AD)
- E. Keyoen Enterprise
正解：B、D
解説：
NSX supports two types of authentication, authorization, and accounting (AAA) systems when integrating with VMware Identity Manager: RSA SecurID and LDAP and OpenLDAP based on Active Directory (AD). RSA SecurID is a two-factor authentication system that uses a token-based approach to verify the identity of users. LDAP and OpenLDAP based on AD are directory services that store and manage user information and credentials. Both systems can be used to provide centralized authentication for users who want to access applications in an NSX environment.
https://blogs.vmware.com/networkvirtualization/2017/11/remote-user-authentication-and-rbac-with-nsx- t.html The integration of VMware Identity Manager with NSX provides the following benefits related to user authentication:
* Support for extensive authentication, authorization, and accounting (AAA) systems, including:
- RADIUS
- Smart cards and common access cards
- RSA SecureID
- LDAP and OpenLDAP based on Active Directory (AD)
* Enterprise SSO:
- Common authentication platform across multiple VMware solutions
- Seamless SSO experience
NSX has its own native LDAP and Active Directory integration, but VMware Identity Manager also offers this capability
質問 # 85
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. Tier-1 Gateway
- B. DFW
- C. Segment
- D. Segment Port
- E. Group
正解：B、E
解説：
A group is a logical construct that represents a collection of objects in NSX, such as segments, segment ports, virtual machines, IP addresses, MAC addresses, tags, or security policies. A group can be used to define dynamic membership criteria based on various attributes or filters. A group can also be used as the scope of a distributed firewall rule, which means that the rule will apply to all the traffic that matches the group membership criteria32 Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-41CC06DF-1CD4-
4233-B43E-492A9A3AD5F6.html
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-
vSphere/6.4/com.vmware.nsx.admin.doc/GUID-D44C8923-992F-4695-B9C0-5CC271679D09.html
質問 # 86
Which two are supported by L2 VPN clients? (Choose two.)
- A. 3rd party Hardware VPN Device
- B. NSX Autonomous Edge
- C. NSX for vSphere Edge
- D. NSX Edge
正解：B、D
解説：
The following L2 VPN clients are recommended:
1. NSX Managed NSX Edge in a separate NSX Managed environment.
* Overlay and VLAN segments can be extended.
2. Autonomous Edge:
* Enables L2 VPN access from a non-a NSX environment to NSX environments.
* Deployed by using an OVF file on a host that is not managed by NSX.
* Only VLAN segments can be extended.
質問 # 87
In which VPN type are the Virtual Tunnel interfaces (VTI) used?
- A. Route-based VPN
- B. Route & SSL based VPNs
- C. SSL-based VPN
- D. Policy & Route based VPNs
正解：A
解説：
Virtual Tunnel Interfaces (VTI) are used in route-based VPNs. In this type of VPN, the tunnel is treated like a regular interface on the router. This allows for the configuration of routing protocols and the application of routing decisions to the traffic flowing through the VPN tunnel. VTIs simplify the management of routing and make it more flexible in VPN scenarios.
質問 # 88
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switches
- B. get logical-switch <Local-Switch-UUID> status
- C. get logical-switch <Logical-Switch-UUID>
- D. get logical-switch status
正解：A
解説：
https://vdc-download.vmware.com/vmwb-repository/dcr-public/c3fd9cef-6b2b-4772-93be-
3fe60ce064a1/1f67b9e1-b111-4de7-9ea1-39931d28f560/NSX-T%20Command-
Line%20Interface%20Reference.html#get%20logical-switch%20%3Clogical-switch-id%3E
質問 # 89
......
合格させる2V0-41.24試験問題は更新された117問あります：https://www.goshiken.com/VMware/2V0-41.24-mondaishu.html
2V0-41.24試験問題集、テストエンジン練習テスト問題：https://drive.google.com/open?id=11_frPcW_TDox_FRHumgWwTPWqO_DSVti