[2023年07月03日] 合格させる1Y0-231レビューガイド、信頼され続ける1Y0-231テストエンジン
1Y0-231テストエンジン練習テスト問題、試験問題集
質問 # 11
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?
- A. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
- B. HA heartbeats are only seen on some enabled interfaces of the secondary node.
- C. The Independent Network Configuration (INC) mode is enabled on the primary node.
- D. HA monitoring is enabled on a disabled interface of the primary node.
正解：A
質問 # 12
A Citrix Administrator wants to customize the look of the landing page presented to users during the authentication process on Citrix ADC.
Which nFactor component should the administrator modify in this scenario?
- A. NoAuth Policy
- B. Pass-through factor
- C. Next factor
- D. Logon Schema
正解：D
質問 # 13
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. UDP
- B. LDAP
- C. TCP
- D. PING
正解：C
質問 # 14
SAML is an authentication protocol based on _____________.
- A. HTML
- B. YAML
- C. LDAP
- D. XML
正解：D
質問 # 15
Scenario: Users are attempting to logon through Citrix Gateway. They successfully pass the Endpoint Analysis (EPA) scan, but are NOT able to see the client choices at logon.
What can a Citrix Administrator disable to allow users to see the client choices at logon?
- A. Quarantine groups
- B. nFactor authentication
- C. Split tunneling
- D. Client choices globally
正解：A
質問 # 16
Which scenario will cause automatic high availability (HA) synchronization to fail?
- A. Manually forced synchronization
- B. Different build versions
- C. A configuration change to the primary Citrix ADC
- D. A forced failover
正解：A
解説：
Explanation/Reference: https://support.citrix.com/article/CTX124439
質問 # 17
Scenario: A Citrix Administrator needs to implement a Citrix ADC solution. The appliance must be able to grow with increasing bandwidth demand and SSL offload performance.
Which two Citrix ADC platforms should the administrator choose to accommodate these requirements?
(Choose two.)
- A. SDX
- B. BLX
- C. VPX
- D. MPX
- E. CPX
正解：A、D
質問 # 18
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A command policy to the group
- C. A nested group to the new group
- D. Users to the group on the Citrix ADC
正解：B
質問 # 19
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. UDP
- B. LDAP
- C. TCP
- D. PING
正解：C
解説：
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-builtin- monitors/monitor-tcp.html
質問 # 20
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Forward proxy
- B. One-arm
- C. Transparent
- D. Two-arm
正解：D
質問 # 21
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?
- A. Dedicated routes in the admin partitions for each department
- B. A VIP in each partition, and bind a VLAN for the department
- C. Policy-based routes for each department in the nsroot partition
- D. Admin partitions that use dedicated VLANs
正解：D
質問 # 22
Scenario: While attempting to access a web server that is load-balanced by a Citrix ADC using HTTPS, a user receives the message below:
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from getting this message?
- A. Ensure that users have the server certificate installed.
- B. Ensure that users have the certificate's private key.
- C. Ensure that users have the certificate's public key.
- D. Ensure that the server certificate is linked to its respective intermediate and root certificates.
正解：D
質問 # 23
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?
- A. DTLS
- B. HTTP
- C. SSL
- D. TCP
正解：C
質問 # 24
A Citrix Administrator needs to block all local printer access from users in the Marketing department who are connecting remotely, but who should still have access when connecting inside the corporate network using the same Citrix Gateway.
What can the administrator configure to accomplish this?
- A. AppFlow
- B. SmartControl
- C. Extended access control list (ACL)
- D. Simple access control list (ACL)
正解：B
解説：
Reference:
html
質問 # 25
Which Citrix ADC platform offers an out-of-the-box, hardware-independent, multi-tenant solution?
- A. SDX
- B. VPX
- C. MPX
- D. CPX
正解：A
質問 # 26
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. One-arm
- B. Forward proxy
- C. Transparent
- D. Two-arm
正解：B
質問 # 27
Scenario: A Citrix Administrator deployed a Citrix ADC in one-arm mode. Currently, the VLANs 20, 30, and
40
are tagged on the interface with the option of 'tagall'.
What is true regarding the VLANs, when 'tagall' is enabled on the interface?
- A. VLANS 1, 20, 30, and 40 are tagged on the interface.
- B. VLANS 20, 30, 40, and HA packets are tagged on the interface.
- C. VLANS 20, 30, and 40 are tagged on the interface.
- D. VLANS 1, 20, 30, 40, and HA packets are tagged on the interface.
正解：A
質問 # 28
Which three pieces of information are required for a Citrix Unified Gateway deployment? (Choose three.)
- A. Valid SSL certificate
- B. Advanced license or higher
- C. Secondary authentication for the Citrix Gateway
- D. Content Switching virtual server
- E. Multiple IP addresses for user access
正解：A、B、D
質問 # 29
Which scenario will cause automatic high availability (HA) synchronization to fail?
- A. Manually forced synchronization
- B. Different build versions
- C. A configuration change to the primary Citrix ADC
- D. A forced failover
正解：A
質問 # 30
......
100%無料1Y0-231日常練習試験には72問があります：https://www.goshiken.com/Citrix/1Y0-231-mondaishu.html
1Y0-231試験資料Citrix学習ガイド：https://drive.google.com/open?id=1m_SShPNOj9D0aS3VO7zWzJvCh_Fc8An9