2026年05月13日合格確定ガイド準備350-401試験知能問題集
無料最新CCNP Enterprise 350-401リアル試験問題と回答2026年更新
Cisco 350-401：Cisco Enterprise Network Core Technologies（350-401 Encor）試験の実装は、エンタープライズネットワーキングの分野でキャリアを進めたいネットワークの専門家にとって重要な認定試験です。エンタープライズネットワークテクノロジーに関連するさまざまなトピックをカバーしており、候補者はネットワーク設計、自動化、セキュリティ、仮想化、ネットワークインフラストラクチャを深く理解する必要があります。この試験に合格することは、CCNPエンタープライズ認定を取得し、エンタープライズネットワーキングの分野でのキャリアを前進させるための重要なステップです。
シスコ350-401（Implementing Cisco Enterprise Network Core Technologies）認定試験は、コア企業ネットワーク技術の実装に関する知識やスキルを検証したい個人を対象としています。同試験には、ネットワークインフラストラクチャ、セキュリティ、自動化、仮想化を含む様々なトピックがカバーされます。この試験に合格することは、候補者が複雑な企業ネットワークを設計、構成、トラブルシューティングするために必要な専門知識を持っていることを示します。
質問 # 46
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right
正解：
解説：
Explanation
質問 # 47
Refer to the exhibit.
Which command must be applied to R2 for an OSPF neighborship to form?
- A. network 20.1.1.2.0.0.0.0 area 0
- B. network 20.1.1.2.0.0.255.255 area 0
- C. network 20.1.1.2 255.255.0.0. area 0
- D. network 20.1.1.2 255.255.255 area 0
正解：A
質問 # 48
Refer to the exhibit.
An engineer configures OSPF and wants to verify the configuration Which configuration is applied to this device?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
正解：A
質問 # 49
Which method displays text directly into the active console with a synchronous EEM applet policy?
- A. event manager applet boom
event syslog pattern 'UP'
action 1.0 gets 'logging directly to console' - B. event manager applet boom
event syslog pattern 'UP'
action 1.0 puts 'logging directly to console' - C. event manager applet boom
event syslog pattern 'UP'
action 1.0 string 'logging directly to console' - D. event manager applet boom
event syslog pattern 'UP'
action 1.0 syslog priority direct msg 'log directly to console'
正解：D
解説：
Explanation
To enable the action of printing data directly to the local tty when an Embedded Event Manager (EEM) applet is triggered, use the action puts command in applet configuration mode.
The following example shows how to print data directly to the local tty:
The action puts command applies to synchronous events. The output of this command for a synchronous applet is directly displayed to the tty, bypassing the syslog.
質問 # 50
A wireless administrator must create a new web authentication corporate SSID that will be using ISE as the external RADIUS server. The guest VLAN must be specified after the authentication completes. Which action must be performed to allow the ISE server to specify the guest VLAN?
- A. Enable Network Access Control State.
- B. Enable AAA Override
- C. Set AAA Policy name.
- D. Set RADIUS Profiling
正解：D
質問 # 51 
Refer to the exhibit. What is the value of the variable list after the code is run?
- A. [1, 10, 10, 10]
- B. [1, 2, 10]
- C. [1, 2, 10, 4]
- D. [1, 2, 3, 10]
正解：D
質問 # 52
An engineer must use flexible NetFlow on a group of switches. To prevent overloading of the flow collector, if the flow is idle for 20 seconds, the flow sample should be exported. Which command set should be applied?
- A.
- B.
- C.
- D.
正解：A
質問 # 53
What does this EEM applet event accomplish?
"event snmp oid 1.3.6.1.3.7.1.5.1.2.4.2.9 get-type next entry-op g
entry-val 75 poll-interval 5"
- A. It issues email when the value is greater than 75% for five polling cycles.
- B. It presents a SNMP variable that can be interrogated.
- C. Upon the value reaching 75%, a SNMP event is generated and sent to the trap server.
- D. It reads an SNMP variable, and when the value exceeds 75%, it triggers an action.
正解：D
解説：
EEM offers the ability to monitor events and take informational or corrective action when the monitored events occur or reach a threshold. An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration.
To specify the event criteria for an Embedded Event Manager (EEM) applet that is run by sampling Simple Network Management Protocol (SNMP) object identifier values, use the event snmp command in applet configuration mode.
event snmp oid oid-value get-type {exact | next} entry-op operator entry-val entry-value [exit- comb {or | and}] [exit-op operator] [exit-val exit-value] [exit-time exit-time-value] poll-interval poll- int-value
+ oid: Specifies the SNMP object identifier (object ID)
+ get-type: Specifies the type of SNMP get operation to be applied to the object ID specified by the oid-value argument.
- next - Retrieves the object ID that is the alphanumeric successor to the object ID specified by the oid-value argument.
+ entry-op: Compares the contents of the current object ID with the entry value using the specified operator. If there is a match, an event is triggered and event monitoring is disabled until the exit criteria are met.
+ entry-val: Specifies the value with which the contents of the current object ID are compared to decide if an SNMP event should be raised.
+ exit-op: Compares the contents of the current object ID with the exit value using the specified operator. If there is a match, an event is triggered and event monitoring is reenabled.
+ poll-interval: Specifies the time interval between consecutive polls (in seconds) Reference: https://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtioseem.html
質問 # 54
When reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?
- A. Mismatched OSPF link costs
- B. Mismatched OSPF network type
- C. Mismatched areas
- D. Mismatched MTU size
正解：D
解説：
When OSPF adjacency is formed, a router goes through several state changes before it becomes fully adjacent with its neighbor. The states are Down -> Attempt (optional) -> Init -> 2-Way -> Exstart -> Exchange -> Loading -> Full. Short descriptions about these states are listed below:
Down: no information (hellos) has been received from this neighbor.
Attempt: only valid for manually configured neighbors in an NBMA environment. In Attempt state, the router sends unicast hello packets every poll interval to the neighbor, from which hellos have not been received within the dead interval.
Init: specifies that the router has received a hello packet from its neighbor, but the receiving router's ID was not included in the hello packet
2-Way: indicates bi-directional communication has been established between two routers.
Exstart: Once the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR.
Exchange: OSPF routers exchange database descriptor (DBD) packets
Loading: In this state, the actual exchange of link state information occurs Full: routers are fully adjacent with each other (Reference: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0e.s html) Neighbors Stuck in Exstart/Exchange State the problem occurs most frequently when attempting to run OSPF between a Cisco router and another vendor's router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces don't match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighboring router ignores the packet.
質問 # 55
Refer to the exhibit. Which HTTP JSON response does the python code output give?
- A. KeyError 'kickstart_ver_str'
- B. NameError: name 'json' is not defined
- C. 7.61
- D. 7.0(3)I7(4)
正解：D
解説：
+ If you want to run the full code in this question in Python (with a real HTTP JSON response), you must first install "requests" package before "import requests".
+ The error "NameError: name 'json' is not defined" is only shown if we forgot the line "import json" in Python code -> Answer A is not correct.
+ We only see the "KeyError" message if we try to print out an unknown attribute (key).
質問 # 56
Refer to the exhibit.
Assuming all links are functional, which path does PC1 take to reach DSW1?
- A. PC1 goes from ALSW1 to DSW2 to DSW1
- B. PC1 goes form ALSW1 to DSW2 to ALSW2 to DSW1
- C. PC1 goes from ALSW1 to DSW2 to Core to DSW1
- D. PC1 goes from ALSW1 to DSW1
正解：A
解説：
Explanation
In the topology above, we see DSW2 has lowest priority 24576 so it is the root bridge for VLAN 10 so surely all traffic for this VLAN must go through it. All of DSW2 ports must be in forwarding state. And:
+ The direct link between DSW1 and ALSW1 is blocked by STP. + The direct link between DSW1 and ALSW2 is also blocked by STP.
Therefore PC1 must go via this path: PC1 -> ALSW1 -> DSW2 -> DSW1.
質問 # 57
What is the output of this code?
- A. username
- B. CISCO
- C. get_credentials
- D. username Cisco
正解：B
質問 # 58
Which devices does Cisco DNA Center configure when deploying an IP-based access control policy?
- A. selected individual devices
- B. All devices integrating with ISE
- C. all wired devices
- D. all devices in selected sites
正解：B
解説：
Explanation
When you click Deploy, Cisco DNA Center requests the Cisco Identity Services Engine (Cisco ISE) to send notifications about the policy changes to the network devices.
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automationand- management/dna-center/1-3-1-
0/user_guide/b_cisco_dna_center_ug_1_3_1_0/b_cisco_dna_center_ug_1_3_1_0_chapter_01011.ht ml
質問 # 59
Refer to the exhibit.
A port channel is configured between SW2 and SW3. SW2 is not running a Cisco operating system. When all physical connections are mode, the port channel does not establish. Based on the configuration excerpt of SW3, what is the cause of the problem?
- A. The port-channel interface lead balance should be set to src-mac
- B. The port channel on SW2 is using an incompatible protocol.
- C. The port-channel should be set to auto.
- D. The port-channel trunk is not allowing the native VLAN.
正解：B
質問 # 60
An engineer must create a script to append and modify device entries in a JSON-formatted file. The script must work as follows:
* Until interrupted from the keyboard, the script reads in the hostname of a device, its management IP address, operating system type, and CLI remote access protocol.
* After being interrupted, the script displays the entered entries and adds them to the JSON-formatted file, replacing existing entries whose hostname matches.
The contents of the JSON-formatted file are as follows:
Drag and drop the statements onto the blanks within the code to complete the script. Not all options are used.
正解：
解説：
Explanation:
Text, letter Description automatically generated
質問 # 61
Drag and drop the automation characteristics from the left onto the appropriate tools on the right.
正解：
解説：
Explanation:
質問 # 62
What are two considerations when using SSO as a network redundancy feature? (Choose two)
- A. requires synchronization between supervisors in order to guarantee continuous connectivity
- B. must be combined with NSF to support uninterrupted Layer 3 operations
- C. must be combined with NSF to support uninterrupted Layer 2 operations
- D. the multicast state is preserved during switchover
- E. both supervisors must be configured separately
正解：A、B
解説：
Explanation
質問 # 63
......
究極な準備用ガイド350-401認定試験CCNP Enterprise：https://www.goshiken.com/Cisco/350-401-mondaishu.html
350-401究極な学習ガイド：https://drive.google.com/open?id=1RWhPayiml_4MT0a6l3sb2M6hPmygBG9V