350-401無料更新100%試験合格率保証 [2025]
[2025年11月] 認証されたCisco試験問題集で350-401試験学習ガイド
Cisco 350-401（Cisco Enterprise Network Core Technologies（350-401 Encor））認定試験は、Cisco Systemsが提供する専門レベルの認定試験です。この試験では、複雑なエンタープライズネットワークソリューションの実装とトラブルシューティングにおけるネットワークエンジニアの知識とスキルをテストします。この試験に合格した候補者は、Cisco認定スペシャリスト - エンタープライズコア認定を獲得します。
Cisco 350-401認定試験の準備をするために、候補者は、公式のトレーニングコース、学習資料、練習試験など、Ciscoが提供するさまざまなリソースを利用できます。これらのリソースは、試験でテストされたすべてのトピックとスキルをカバーし、候補者がエンタープライズネットワークコアテクノロジーを深く理解し、試験に合格するために必要なスキルを習得するのに役立ちます。さらに、候補者はオンラインフォーラムやコミュニティに参加して、他のIT専門家とつながり、この分野での知識と経験を共有することもできます。
質問 # 26
Refer to the exhibit.
What is the JSON syntax that is formed from the data?
- A. ("Make":[ "Gocar", "Model": "Zoom"], Features": ["Power Windows", "Manual Drive", "Auto AC"]}
- B. 'Make ": "Gocar1, "Model": "Zoom", "Features": ["Power Windows", "Manual Drive", "Auto AC"]
- C. {"Make": Gocar, "Model": Zoom, "Features": Power Windows, Manual Drive, Auto AC}
- D. Make":'Gocar, "Model': "Zoom", "Features": ["Power Windows", "Manual Dnve", "Auto AC"]}
正解：D
解説：
Explanation
質問 # 27
Drag and drop the descriptions from the left onto the routing protocol they describe on the right.
正解：
解説：
質問 # 28 
Refer to the exhibit. R1 and R2 are directly connected, but the BGP session does not establish. Which action must be taken to build an eBGP session?
- A. Configure neighbor 2.2.2.2 remote-as 65002 under R1 BGP process.
- B. Configure neighbor 192.168.12.1 activate under R2 BGP process.
- C. Configure ip route 1.1.1.1 0.0.0.0 192.168.12.1 on R2.
- D. Configure no neighbor 192.168.12.1 shutdown under R2 BGP process.
正解：A
解説：
To establish an eBGP session between R1 and R2, the correct action is to configure R1 with the neighbor statement that specifies R2's IP address and its autonomous system (AS) number. This is done by using the command neighbor 2.2.2.2 remote-as 65002 under the BGP process on R1. This configuration tells R1 that it should establish a BGP session with a neighbor at IP address 2.2.2.2 which is in AS 65002. References: The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) course provides detailed instructions on configuring BGP sessions in a service provider environment
質問 # 29
How does the RIB differ from the FIB?
- A. The RIB includes many routes to the same destination prefix. The FIB contains only the best route
- B. The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.
- C. The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.
- D. The FIB includes many routes a single destination. The RIB is the best route to a single destination.
正解：C
解説：
Explanation
質問 # 30 
Refer to lhe exhibit. An engineer deploys a script to retrieve the running configuration from a NETCONF- capable CiscoIOSXE device that Is configured with default settings. The script fails. Which configuration must be applied to retrieve the configuration using NETCONF?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
正解：B
質問 # 31
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
正解：
解説：
.
質問 # 32
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
正解：
解説：
Explanation
EIGRP maintains alternative loop-free backup via the feasible successors. To qualify as a feasible successor, a router must have an Advertised Distance (AD) less than the Feasible distance (FD) of the current successor route.
Advertised distance (AD): the cost from the neighbor to the destination. Feasible distance (FD): The sum of the AD plus the cost between the local router and the next-hop router
質問 # 33
Refer to the exhibit. The administrator configures an ERSPAN session, but no packets are received on the destination host. Which action is required to complete the configuration?
- A. Ensure that the ERSPAN destination addresses are not reachable through the Mgmt-vrf VRF.
- B. Enable the ERSPAN session.
- C. Ensure that the ERSPAN destination is reachable from the switch.
- D. Configure the ERSPAN destination VLAN as an RSPAN VLAN.
正解：B
解説：
Finally, enable the session using the 'no shutdown' command to guarantee it is active.
質問 # 34
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.
正解：
解説：
Explanation
Graphical user interface, diagram Description automatically generated
質問 # 35
Refer to the exhibit.
Which LISP component do routers in the public IP network use to
forward traffic between the two networks?
- A. map server
- B. EID
- C. map resolver
- D. RLOC
正解：D
解説：
Explanation
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address:
+ Endpoint identifiers (EIDs) - assigned to end hosts.
+ Routing locators (RLOCs) - assigned to devices (primarily routers) that make up the global routing system.
質問 # 36
Which are three interface types or submodes on which a PPPoE client can be started? (Choose three.)
- A. GRE tunnel
- B. ATM PVC
- C. Loopback
- D. Serial
- E. Ethernet
- F. SVI
正解：B、E、F
質問 # 37 
正解：
解説：
See the solution below in Explanation:
Explanation:
Solution:
Copy run start
Verification:
OR
質問 # 38
A network administrator for a small office is adding a passive IDS to its network switch for the purpose of inspecting network traffic. Which of the following should the administrator use?
- A. SNMPtrap
- B. Syslog collection
- C. Port mirroring
- D. API integration
正解：C
解説：
This is because port mirroring is a feature that allows a switch to copy the traffic from one or more ports to another port, where a passive IDS can be connected. A passive IDS is a device that monitors the network traffic and detects any malicious or suspicious activity, but does not take any action to block or prevent it. Port mirroring can enable a passive IDS to inspect the network traffic without affecting the performance or availability of the network. The source of this answer is the Cisco ENCOR v1.1 course, module 6, lesson 6.2:
Implementing SPAN, RSPAN, and ERSPAN.
質問 # 39
A client device fails to see the enterprise SSID, but other client devices are connected to it.
What is the cause of this issue?
- A. The client has incorrect credentials stored for the configured hidden SSID.
- B. The broadcast SSID was not manually configured on the client.
- C. The client has incorrect credentials stored for the configured broadcast SSID.
- D. The hidden SSID was not manually configured on the client.
正解：D
質問 # 40
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
正解：
解説：
質問 # 41
Which data modeling language is commonly used by NETCONF?
- A. XML
- B. YANG
- C. REST
- D. HTML
正解：B
解説：
Cisco IOS XE supports the Yet Another Next Generation (YANG) data modeling language. YANG can be used with the Network Configuration Protocol (NETCONF) to provide the desired solution of automated and programmable network operations. NETCONF(RFC6241) is an XML-based protocol that client applications use to request information from and make configuration changes to the device. YANG is primarily used to model the configuration and state data used by NETCONF operations.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-
5/configuration_guide/prog/b_165_prog_9500_cg/data_models.pdf
Note: Although NETCONF also uses XML but XML is not a data modeling language.
質問 # 42
Refer to the Exhibit.
Running the script causes the output in the exhibit. What should be the first line of the script?
- A. from ncclient import *
- B. import manager
- C. ncclient manager import
- D. from ncclient import manager
正解：A
質問 # 43
How is Layer 3 roaming accomplished in a unified wireless deployment?
- A. An EoIP tunnel is created between the client and the anchor controller to provide seamless connectively as the client is associated with the new AP.
- B. The client database on the original controller is updated with the anchor entry, and the new controller database is updated with the foreign entry.
- C. The new controller assign an IP address from the new subnet to the client.
- D. The client entry on the original controller is passed to the database on the new controller.
正解：A
質問 # 44
Refer to the exhibit.
Edge-01 is currently operational as the HSRP primary with priority 110. Which command on Edge-02 causes it to take over the forwarding role when Edge-01 is down?
- A. standby 10 priority
- B. standby 10 track
- C. standby 10 timers
- D. standby 10 preempt
正解：D
解説：
The -preempt || command enables the HSRP router with the highest priority to immediately become the active router.
質問 # 45
Refer to the exhibit.
Which commands are required to allow SSH connection to the router?
- A.
- B.
- C.
- D.
正解：B
質問 # 46
What is the purpose of the weight attribute in an EID-to-RLOC mapping?
- A. It indicates the load-balancing ratio between ETRs of the same priority.
- B. It indicates the preference for using LISP over native IP connectivity.
- C. It determines the administrative distance of LISP generated routes in the RIB.
- D. It identifies the preferred RLOC address family.
正解：A
解説：
In the LISP context, for each RLOC mapped to an EID, the mapping system provides a priority and a weight. When several RLOCs have the same priority, the LISP traffic is split among the different RLOCs in proportion to their weight. This makes possible to control the traffic that enters a site by tuning the RLOCs sent to different sources and also by changing their priorities and weights.
質問 # 47
Drag and drop the characteristics from the left to the table types on the right.
正解：
解説：
質問 # 48
Which JSON syntax is valid?
- A.
- B.
- C.
- D.
正解：B
解説：
This JSON can be written as follows:
{
'switch': {
'name': 'dist1',
'interfaces': ['gig1', 'gig2', 'gig3']
}
}
質問 # 49
Which template is used when multiple templates are grouped together to run in succession in Cisco DNA Center?
- A. composite
- B. configuration
- C. project
- D. regular
正解：A
解説：
In Cisco DNA Center, when multiple templates are grouped together to run in succession, a composite template is used. This allows for a sequence of configurations to be applied collectively to devices, ensuring that all necessary settings are deployed in the correct order.
質問 # 50
Drag and drop the threat defense solutions from the left onto their descriptions on the right.
正解：
解説：
質問 # 51
......
シスコ350-401試験は、企業ネットワークにおいて3〜5年以上の経験を持つネットワークエンジニア、デザイナー、管理者、および技術者を対象としています。120分以内に回答する必要がある90〜110の質問から構成されたオンライン監視試験です。試験の合格スコアは、試験のバリエーションによって異なり、約750〜850ポイントです。
正真正銘のベスト試験材料は350-401オンライン練習試験：https://www.goshiken.com/Cisco/350-401-mondaishu.html
350-401テストエンジン練習試験：https://drive.google.com/open?id=1dgTvUAFH3pR7rStmPtdtGj5kVb1O1jCA