API-936無料試験学習ガイド！（更新された100問あります)
API-936問題集にはIndividual Certification Programs認証済み試験問題と解答
API-936認定を受けるためには、候補者は耐火物質に関する業務で最低5年の経験が必要であり、そのうち耐火物質の設置、検査、試験、修理に関する経験が1年以上必要です。さらに、候補者は高校卒業または同等の資格、または関連分野の2年間の学位を持っている必要があります。
質問 # 42
Heating the new refractory too rapidly will cause
- A. Chemical attack
- B. None of the above
- C. Structural deterioration
- D. Explosive spalling
正解：D
質問 # 43
Compositions of ground refractory materials develop a strong bond at air ambient temperatures by virtue of chemical reactions within the binder phase that is usually activated by water additions. These refractories include cement and phosphate bonded castables is called:
- A. Heat setting refractories
- B. Air setting refractories
- C. None of the above
- D. Air and heat setting refractory
正解：B
質問 # 44
Refractories containing a substantial amount of silica which is reactive with basic refractories, basic slags, or basic fluxes at high temperatures are known as
- A. Basic refractories
- B. None of the above
- C. Natural refecatories
- D. Acid refractories
正解：D
質問 # 45
A condition describing a refractory lining that is soft and friable
- A. None of the above
- B. Slumping
- C. Plunky
- D. Bloating
正解：C
質問 # 46
The welding method utilizing an arc-welding machine in conjunction with a timer and a gun is called
- A. Footed anchor
- B. None of the above
- C. V-anchor
- D. Stud weld
正解：D
質問 # 47
The surface of a refractory section exposed to the source of heat
- A. None of the above
- B. smooth face
- C. hot face
- D. cold face
正解：C
質問 # 48
A moldable refractory material that can be extruded and has a level of workability that permits it to be pounded into place to form a monolithic structure
- A. None of the above
- B. Ramming mix
- C. Monolithic refractory
- D. Plastic refractory
正解：D
質問 # 49
Metallic anchor made from rod or bar and usually used for dual layer linings that are configured in
- A. All of the above
- B. U shape
- C. V shape
- D. Y shape
正解：D
質問 # 50
Materials having refractory properties which form a refractory body when bonded into a conglomerate mass by a matrix is called
- A. Cementitious concrete
- B. None of the above
- C. Refractory aggregate
- D. Refractory mass
正解：C
質問 # 51
API 936 documentation should content
- A. Design details
- B. All above
- C. Quality standards
- D. Execution details
正解：B
質問 # 52
Brick, tile, fired shapes and fused cast shapes are
- A. all above
- B. unshaped refractory
- C. shaped refractory
- D. refractory fiber
正解：C
質問 # 53
A refractory materials, stiffer than plastic, that cannot be extruded but has suitable properties to permit ramming into place to form a monolithic structure
- A. Plastic refractory
- B. None of the above
- C. Ramming mix
- D. Monolithic refractory
正解：C
質問 # 54
As per API recommended practice 936, the standard test method for reheat change of refractory brick is
- A. C113 - 02
- B. None of the above
- C. C 133 - 97
- D. C 181 - 91
正解：A
質問 # 55
As installed testing is the terminology for testing refractory that was sampled during installation in order to confirm that they meet specified.
- A. None of the above
- B. Both as above
- C. Chemical property standards
- D. Physical property standards
正解：D
質問 # 56
Section of transfer line in which flow is in a downward direction is called
- A. Standpipe of FCCU
- B. Riser of FCCU
- C. None of the above
- D. Transfer line of FCCU
正解：A
質問 # 57
A group of rock minerals having nearly perfect cleavage in one direction and consisting of thin elastic plates and the most common varieties are muscovite and biotite is called
- A. Mica
- B. None of the above
- C. Corundum
- D. Kaolin
正解：A
質問 # 58
Section of transfer line in which flow is in an upward direction is called
- A. Cyclone of FCCU
- B. Plenum of FCCU
- C. None of the above
- D. Riser of FCCU
正解：D
質問 # 59
As per ASTM C- 704, for the erosion tests, silicon carbide grit is to be used by
- A. Three-time
- B. None of the above
- C. One time
- D. Two time
正解：C
質問 # 60
The loss of fragmented refractories from the face of the refractory structure, through cracking and rupturing which results in the exposure of the original inner portion of the refractory lining is called
- A. Erosion
- B. Spalling
- C. Sheeting
- D. Bypassing
正解：B
質問 # 61
The color of stripe for 304L alloy material of metallic anchor is
- A. 1 solid black
- B. None of the above
- C. 2 solid black
- D. 1 solid grey
正解：C
質問 # 62
To compose a sample for the modulus of rupture test from an equivalent number of refractory shapes, the specimen should be
- A. At least two
- B. At least four
- C. At least three
- D. At least five
正解：D
質問 # 63
Colour coding does not require for anchor alloy of
- A. SS310
- B. None of the above
- C. Carbon steel
- D. SS304
正解：C
質問 # 64
Cristobalite is an important constituent of
- A. Insulating brick
- B. Magnesia brick
- C. Silica brick
- D. Alumina bricks
正解：C
質問 # 65
Based on-screen analysis, the size of Alumina - silicate aggregate in typical modern castable is
- A. None of the above
- B. 60 - 70%
- C. 50 - 60%
- D. 70 - 8-%
正解：B
質問 # 66
The air pressure to blast the 1000 g of size graded silicon carbide grain for abrasion resistance test should be
- A. 450 KPa
- B. 400 KPa
- C. None of the above
- D. 448 KPa (65 PSi)
正解：D
質問 # 67
......
API-936（耐火担当者）認証試験は、石油化学、発電、鉄鋼生産などの産業で耐火物材料を扱う専門家の業界に認識された認証です。この認定は、アメリカ石油研究所（API）によって提供されており、耐火物の分野での個人の能力と知識を検証するように設計されています。この試験は、炉、ボイラー、kiなどの高温用途で耐火物を扱う人向けです。
実際問題を使ってAPI-936問題集で100%無料API-936試験問題集：https://www.goshiken.com/API/API-936-mondaishu.html