API-936無料更新100%試験合格率保証 [2023]
[2023年04月] 認証されたAPI試験問題集でAPI-936試験学習ガイド
API-936試験は、耐火材料とその応用についての徹底的な理解が必要な、厳格で挑戦的な試験です。試験は120問の多肢選択問題から構成され、受験者は4時間以内に試験を完了する必要があります。試験に合格するには、受験者は少なくとも70％のスコアを達成する必要があります。
API-936（耐火物質技術者）試験は、石油化学、発電、セメント製造などのさまざまな産業で耐火物質の取り付け、検査、テスト、保守に関わるプロフェッショナルを対象とした認定プログラムです。認定は、石油・ガス産業の標準を開発・公開するグローバルな認定機関であるアメリカ石油協会（API）によって提供されています。API-936の認定は業界で高く評価され、耐火分野での多くの仕事に必要とされています。
API-936試験は、耐火材料に関連する様々なトピックをカバーしており、使用される材料の種類、取り付け手順、検査技術などが含まれています。試験は、筆記試験と実技試験の2つのパートに分かれています。筆記試験は、材料科学、耐火物の取り付け、検査方法などのトピックをカバーする120問の多肢選択問題で構成されています。実技試験は、業界の基準に従って、候補者の耐火材料の取り付けと検査の能力を実技的にテストすることを含みます。
質問 # 57
Compositions of ground refractory materials which require relatively high temperatures for the development of an adequate bond (commonly called the ceramic bond) is called
- A. heat setting refractories
- B. none of the above
- C. air setting refractories
- D. air and heat setting refractories
正解：A
質問 # 58
As installed testing is the terminology for testing refractory that was sampled during installation in order to confirm that they meet specified.
- A. None of the above
- B. Both as above
- C. Physical property standards
- D. Chemical property standards
正解：C
質問 # 59
Brick, tile, fired shapes and fused cast shapes are
- A. all above
- B. unshaped refractory
- C. refractory fiber
- D. shaped refractory
正解：D
質問 # 60
For air-setting phosphate bonded, erosion-resistant refractories mixing, the mixer's paddles, and bowls shall be
- A. None of the above
- B. Steel
- C. Carbon
- D. Aluminium
正解：B
質問 # 61
Packing of chemical setting refractories should have mechanical protection by
- A. Rigid plastic
- B. Cardboard
- C. Any of the above.
- D. Metal outside
正解：C
質問 # 62
For fire clay and some high alumina materials, the most commonly used index of refractoriness is known as:
- A. None of the above
- B. Refractoriness
- C. Pyrometric cone equivalent
- D. Refractoriness under load
正解：C
質問 # 63
Applicator qualification for plastic thick layer, the test panel with an applied lining thickness and anchorage shall be
- A. 500 x 500 mm
- B. 300 x 300 mm
- C. None of the above
- D. 600mm x 300 mm (24" x 12")
正解：D
質問 # 64
A group of impure magnesium silicate minerals that occur in a fiberous form is known as
- A. Asbestos
- B. None of the above
- C. Mineral fibre
- D. Fused silica
正解：A
質問 # 65
Gunning test panels are constructed with removable backs as required for
- A. laboratory test
- B. physical property test
- C. None of the above
- D. visual inspection of the castable
正解：D
質問 # 66
Enclosure inside the top head of a reactor or regenerator vessel which supports the cyclones and in which gases exiting the cyclone outlets are collected is called
- A. Cyclone of FCCU
- B. None of the above
- C. Plenum of FCCU
- D. Riser of FCCU
正解：C
質問 # 67
Refractory failure mechanisms are.
- A. Overheating and chemical attack
- B. Erosion and corrosion
- C. Thermal shock and mechanical abuse
- D. All of the above
正解：D
質問 # 68
A metallic anchor used to attach ceramic anchors to the casing or shall of a processing unit is
- A. None of the above
- B. C-clip
- C. Claw anchor
- D. U - anchor
正解：B
質問 # 69
As per API recommended practice 936, the standard test method for reheat change of refractory brick is
- A. C 181 - 91
- B. C113 - 02
- C. None of the above
- D. C 133 - 97
正解：B
質問 # 70
The color of stripe for 304L alloy material of metallic anchor is
- A. 1 solid black
- B. 1 solid grey
- C. None of the above
- D. 2 solid black
正解：D
質問 # 71
The vessel in which cracking reaction occurs or is completed and product gases are separated from coke and/or catalyst particulate is called
- A. Regenerator of FCCU
- B. None of the above
- C. Reactor of FCCU
- D. Cyclones of FCCU
正解：C
質問 # 72
A separation between adjoining parts of a refractory lining that allows small expansive movements, such as those caused by thermal change is known as
- A. Thermal expansion
- B. None of the above
- C. Thermal conductivity
- D. Expansion joint
正解：D
質問 # 73
Fiber concentrations typically range is
- A. 1 - 2 wt percent
- B. 1 - 3 wt percent
- C. 1 - 4 wt percent
- D. Any of the above
正解：C
質問 # 74
Mechanical wearing away of the surfaces of refractory bodies in service by washing action of moving liquid or gases is called
- A. None of the above
- B. Erosion of refractories
- C. Crumble of refractories
- D. Spalling of refractories
正解：B
質問 # 75
API 936, the standard test method for the workability index of fire clay and high alumina plastic refractories are
- A. None of the above
- B. C 113 - 02
- C. C 133 - 97
- D. C 181 - 91
正解：D
質問 # 76
Testing frequency for material qualification of refractory for other services requires
- A. None of the above
- B. 1 sample per 3 pallets or more from each production run
- C. 1 sample per 3 pallets or less from each production run
- D. 1 sample per pallet or less from each production run
正解：C
質問 # 77
A refractory materials, stiffer than plastic, that cannot be extruded but has suitable properties to permit ramming into place to form a monolithic structure
- A. Monolithic refractory
- B. None of the above
- C. Ramming mix
- D. Plastic refractory
正解：C
質問 # 78
Fused silica aggregate is used as a raw material in a castable providing
- A. None of the above
- B. Low thermal conductivity
- C. Low thermal conductivity and low thermal expansion
- D. Low thermal expansion
正解：C
質問 # 79
Additives used to facilitate moisture removal of refractory linings during dry out are called
- A. None of the above
- B. Metal fiber
- C. Mineral fiber
- D. Organic fiber
正解：D
質問 # 80
......
正真正銘のベスト試験材料はAPI-936オンライン練習試験：https://www.goshiken.com/API/API-936-mondaishu.html