お手軽にダウンロードできる300-610試験問題集が更新されたのは120問があります
最新更新されたのは300-610試験問題2022年更新
Cisco 300-610 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
質問 57
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
正解:
解説:
質問 58
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. end-host mode feature on the Cisco UCS Fabric Interconnects
- C. NPV feature on the Cisco MDS Series.
- D. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
正解: C,E
質問 59
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP. Which solution should be included in the design?
- A. PIM dense mode
- B. head-end replication
- C. ingress replication
- D. PIM sparse mode
正解: D
質問 60
DRAG DROP
Drag and drop the technologies from the left onto the correct descriptions on the right.
Select and Place:
正解:
解説:
Section: Storage Network Design
質問 61
What is an advantage of using OTV as compared to VPLS for data center redundancy?
- A. provides full-mesh connectivity
- B. provides head-end replication
- C. uses a proactive MAC advertisement
- D. prevents loops on point-to-point links
正解: D
質問 62
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network devices and servers. The company servers already have been security-hardened and must not have any additional software installed on them. The security policy mandates the use of a secure communication protocol that supports authentication and encryption for managing the servers.
Which two automation tools must be used to meet these requirements? (Choose two.)
- A. SaltStack
- B. Puppet
- C. Chef
- D. CFEngine
- E. Ansible
正解: A,B
質問 63
What are two advantages of using Cisco vPC as compared to traditional access layer designs? (Choose two.)
- A. maintains single control plane
- B. disables spanning-tree
- C. uses all available uplink bandwidth
- D. no spanning-tree blocked ports
- E. supports Layer 3 port channels
正解: C,D
質問 64
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. FCoE protocol
- B. end-to-end oversubscription ratio
- C. type of storage
- D. N Port virtualization
正解: B
解説:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html
質問 65
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
正解:
解説:
質問 66
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. end-host mode feature on the Cisco UCS Fabric Interconnects
- C. NPV feature on the Cisco MDS Series.
- D. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
正解: C,E
質問 67
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the disable fips-mode command on each fabric interconnect.
- B. Run the connect local-management command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Erase the configuration of both fabric interconnects.
正解: C
解説:
Section: Compute Design
Explanation/Reference:
質問 68
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node tor the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Fabric Interconnect 6300
- B. HX240c
- C. UCS B200
- D. HX220c
- E. Gigabit Ethernet Switch
正解: D,E
解説:
HX240 is excluded because it is 2RU, while the requirement is to have one rack unit of space.
UCS B200 and FI 6300 are excluded because the solution is required in a branch.
質問 69
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. EVPN
- B. VPC+
- C. UDLD
- D. OSPF
正解: A
質問 70
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Ethernet Adapter
- B. Pin Group Policy
- C. vNIC Template Policy
- D. Network Control Policy
- E. vNIC Policy
正解: C,D
解説:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
質問 71
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Updating
- B. Primary
- C. Secondary
- D. Initial
正解: D
質問 72
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
- A. It is an open standard.
- B. It extends the spanning tree between data centers.
- C. It propagates hosts reachability without support of traffic flooding.
- D. It constrains HSRP hello messages to each data center.
- E. Layer 3 failures do not propagate beyond the OTV edge device.
正解: B,E
質問 73
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
正解:
解説:
質問 74
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. port channel
- B. vPC
- C. physical port
- D. virtual interface
正解: D
解説:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
質問 75
A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?
- A. Nomir
- B. Puppet
- C. Ansible
- D. SaltStack
正解: B
質問 76
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. network speed
- B. processor count
- C. storage capacity
- D. GPU support
正解: C
解説:
Section: Storage Network Design
質問 77
......
無料更新されたCisco 300-610テストエンジン問題には120問題と解答：https://www.goshiken.com/Cisco/300-610-mondaishu.html
ベストな問題集を使おうCCNP Data Center 300-610専門試験問題：https://drive.google.com/open?id=1p3ufDwfueq_g_DsPLeF8dQ-2g2W0rth1