無料提供中の300-610試験問題集で（2025年最新のPDF問題集）信頼度の高いテストエンジン
300-610のPDFで最近更新された問題です集試験点数を伸ばそう
質問 # 28
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have access to its own VRF instance.
Which interface should be used to meet these requirements?
- A. interface VLAN
- B. loopback interface
- C. management interface
- D. physical interface
正解：C
質問 # 29
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. server message block
- B. Internet Small Computer Systems Interface
- C. Fibre Channel over Ethernet
- D. raw device mapping
正解：C
解説：
Reference:
HyperFlex_HX_DataPlatformSoftware/Network_External_Storage_Management_Guide/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0_chapter_010.html
質問 # 30
A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.
Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)
- A. The lOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.
- B. Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.
- C. Straight and cross-connect links should be used between the lOMs and fabric interconnects to offer higher availability.
- D. One, two, four and eight links are supported to be used between each IOM and fabric interconnect.
- E. IOM is connected to the fabric interconnect that is acting as fabric A. and IOM B is connected to the fabric interconnect that is acting as fabric B.
正解：A、B
質問 # 31
Which technology enables Layer 2 extension between remote data center sites?
- A. OTV
- B. FCIP
- C. DMVPN
- D. GRE
正解：A
質問 # 32
Drag the requirements from the left onto the correct policy types on the right.
正解：
解説：
質問 # 33
Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and
3 x UCS 5108 server chassis with 2408 Fabric Extenders. The engineer installs 6 x SQL Server
2019 on all blades and then notices that there are read and write latencies.
What is the best way to balance the utilization across the shared ports?
- A. Change the assigned speed to 8 Gbps Auto.
- B. Disable restrictions on oversubscription ratios
- C. Enable "Only dedicate rate mode
- D. Set 4 Gbps performance buffers
正解：B
解説：
When restrictions on oversubscription ratios are disabled, the bandwidth allocation among the shared ports is proportionate to the configured speed. (If the configured speed is auto, then bandwidth is allocated assuming a speed of 4 Gbps.) For example, if you have three shared ports configured at 1, 2, and 4 Gbps, then the allocated bandwidth ratio is 1:2:4. In Cisco SAN-OS Release 3.0 and later (or when restrictions on oversubscription ratios are enabled), port bandwidths are allocated in equal proportions, regardless of port speed, so, the bandwidth allocation for the same three ports mentioned in the example would be 1:1:1.
Reference:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guid es/fm_3_2/gen2.html#wp1392649
質問 # 34
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
正解：
解説：
質問 # 35
Refer to the exhibit. A Cisco engineer is configuring a next-generation Cisco HyperFlex HX data platform with 2 x Cisco UCS 6248UP fabric interconnects, 8 x Cisco HX-Series HX240c-M4SX servers, plus 8 x Cisco UCS B200-M4 blade servers, Cisco UCS 5108 blade chassis, and Cisco UCS 2204XP fabric extenders. The solution is configured with HX Release 4.5(2a) using VMware ESXi 7.0 U2. After the engineer migrates all customer VMs to the new solution platform, the engineer decides to create HX Native snapshots for all the VMs. The engineer performs the operation and notices that some of the VMs are not creating snapshots. What is the most probable reason that the HX Native snapshots are not created?
- A. The servers have duplicate names
- B. Virtual machines are in suspended state
- C. The source disk is thick provisioned
- D. The node has insufficient datastore space
正解：A
質問 # 36
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node tor the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Gigabit Ethernet Switch
- B. UCS B200
- C. Fabric Interconnect 6300
- D. HX220c
- E. HX240c
正解：A、D
解説：
HX240 is excluded because it is 2RU, while the requirement is to have one rack unit of space.
UCS B200 and FI 6300 are excluded because the solution is required in a branch.
質問 # 37
Refer to the exhibit.
A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?
- A. Multi-Site
- B. Multi-Pod over MP-BGP EVPN
- C. Multi-Cloud
- D. Multi-Pod over OSPF EVPN
正解：B
質問 # 38
Drag and drop the technologies from the left onto the correct descriptions on the right.
正解：
解説：
質問 # 39
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. processor count
- B. network speed
- C. GPU support
- D. storage capacity
正解：C
解説：
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex- hx-series/whitepaper-c11-740243.pdf
質問 # 40
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Ethernet Adapter
- B. vNIC Policy
- C. vNIC Template Policy
- D. Pin Group Policy
- E. Network Control Policy
正解：C、E
解説：
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Network-Mgmt/4-
0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.ht ml
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
質問 # 41
A network engineer is connecting a backup server to the given network The server has three available physical Ethernet interfaces - dual 1Gbps interfaces, plus a single 10Gbps interface - and all devices support virtual port channels The engineer must minimize backup time from hosts on the network, with a mandate for no single point of failure connectivity within the data center and the interfaces either active or passive Which deployment model must the engineer use?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
正解：D
質問 # 42
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
正解：
解説：
質問 # 43
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Increase the queuing buffer in the port-channel interface connected to the storage array.
- B. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
- C. Add an additional FCoE VLAN to the SAN network.
- D. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
正解：B
質問 # 44
A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline. Which action meets these requirements?
- A. Enable failover for the vHBA with VSAN55 and VSAN95 enabled.
- B. Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.
- C. Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.
- D. Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.
正解：B
質問 # 45
Refer to the exhibit. An engineer is setting up the NPV fabric configuration and must choose the correct port type for the switched port analyzer interface of the NPV device. Which port type must the engineer choose?
- A. TF
- B. TE
- C. NP
- D. SD
正解：D
質問 # 46
......
Cisco 300-610認定は、Cisco Data Centerインフラストラクチャの設計に関心のあるネットワークエンジニア、ITアーキテクト、および専門家を対象としています。認定試験は、専門知識が最新のネットワークの進歩と同等であることを保証したい候補者に包括的な知識とトレーニングを提供することに焦点を当てています。さらに、この認定は、候補者がクラウドコンピューティング、仮想化、ハードウェア、ソフトウェアテクノロジーなどの最新の概念を理解するのにも役立ちます。
300-610完全版問題集には無料PDF問題で合格させる：https://www.goshiken.com/Cisco/300-610-mondaishu.html
無料CCNP Data Center 300-610公式認定ガイドPDFダウンロード：https://drive.google.com/open?id=1GC2h7OR447ArOzK3jHX4xOncBz4FM9pE