信頼できるCCNP Data Center 300-610問題集PDF 2026年02月07日最近更新された問題
必ず合格できるCisco 300-610試験正確な330問題と解答あります
シスコ300-610試験は、シスコデータセンターインフラストラクチャの設計スキルを検証したい専門家を対象に設計されています。この認定試験は、データセンターのネットワーク、ストレージネットワーク、コンピュートネットワーク、自動化、およびセキュリティに関連するトピックをカバーしています。この試験に合格することは、データセンターインフラストラクチャ設計の分野でキャリアを進めたい専門家にとって重要なステップです。
Cisco 300-610試験は、ネットワーク設計、ストレージ設計、コンピューティング設計、仮想化、自動化、およびセキュリティに関連する幅広いトピックをカバーしています。試験は、主に多肢選択およびシミュレーションベースの60〜70の質問で構成されています。候補者は90分以内に試験を完了し、1000点満点中750点以上の合格点を取得する必要があります。
質問 # 135
Refer to the exhibit. During a synchronization of port roles, a device receives a proposal message on one of its ports that is s selected as the new root port. The logs show that Rapid PVST+ forced all other ports to synchronize with the new root information. The engineer analyzes the port states and concludes that the device is synchronized with superior root information received on the root port, and all other ports are synchronized. What happens to a designated port that is in the forwarding state and is not configured as an edge port, if Rapid PVST+ forces it to synchronize with new root information?
- A. It immediately replies with its own information.
- B. It transitions to the blocking state.
- C. It does not receive BPDUs for transmission.
- D. It discards frames switched from another port.
正解：B
質問 # 136
Refer to the exhibit. A Cisco engineer is implementing a customer data center design and must configure Cisco MDS 9000 Series Switches. The configuration has the required IP addresses on each SAN. The requirement is that each FCIP is a separate E (ISL), and the FCIP links must connect to different switches across the two SAN islands. Also, the Fibre Channel traffic is to be load-balanced across the FCIP link. After the engineer configures the FCIP profiles and interfaces, they want to enable QoS for the link. Which types of values are needed for the DSCP to mark the IP packets?
- A. port channel and F-ports
- B. control and data connection
- C. E (ISL) and GE peer ports speed
- D. retransmit and keepalive timeout
正解：B
質問 # 137
Which address pool is used when a vHBA template is created?
- A. UUID
- B. WWPN
- C. MAC
- D. IP
正解：B
質問 # 138
An architect is designing a storage solution for a Cisco UCS server infrastructure with these requirements:
* identical deployment of servers
* can add vHBAs to a group of servers
* configuration of servers stays synchronized
Which solution meets these requirements?
- A. service profile template
- B. global adapter policy
- C. updating vNIC template
- D. WWPN pool
正解：A
質問 # 139
In this data structure, what is the XML terminology for the currency="usd" code snippet?
<? xml version="1.0" encoding="UTF-8"?>
<ciscopress>
<book isbn="50581730795252386">
<title>Routing TCP/IP</title>
<author>Jeff Doyle</author>
<category></category>
<year>2005</year>
<edition>2</edition>
<price currency="usd">72</price>
</book>
</ciscopress>
- A. attribute
- B. root element start tag
- C. character
- D. root element end tag
正解：A
質問 # 140 
Refer to the exhibit. A network engineer must improve high availability within the given UCS infrastructure The engineer configured central nodes A and B in cluster mode to ensure that traffic fails over in the case of a network outage. Which type of redundancy will the cluster configuration provide?
- A. redundancy via a single fabric interconnect
- B. link-level redundancy via one management port
- C. redundancy for the management plane only
- D. redundancy for the management, control, and data planes
正解：D
質問 # 141
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.
Which FCoE solution meets these requirements?
- A. single switch with multiple links
- B. at least two FC zone sets with multiple zones
- C. single VSAN across the fabric
- D. at least two VSANs across the fabric
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_2/configuration/guides
/dmm/dmmcfg/toplgy.html
質問 # 142
A large financial institution hosts all customer data in a critical data center with a single physical location. Top management is concerned about the risk of a single-site failure, but budget is also an issue, so the network engineering team is working to implement a cost-effective redundancy strategy with a second data center. The new data center must use a three-tier design identical to the existing data center. Business requirements dictate that all data must always be accessible from anywhere in the world, even if a single site fails. The team purchased two Cisco Nexus 7700 Series Switches and four Catalyst 8000 Series Routers. Which action must the team take to accomplish the goal?
- A. Implement HSRP with the Nexus 7700 Series devices to provide gateway redundancy to ensure seamless failover between the Nexus switches
- B. Implement OTV with the Nexus 7700 Series devices to extend Layer 2 connectivity between the two data centers and provide disaster-recovery capabilities
- C. Implement NVGRE on the Catalyst 8000 routers to create a DCI communication channel between the data centers and provide Layer 2 extension capabilities
- D. Implement FabricPath on the Catalyst 8000 routers in both data centers to provide full redundancy in the event of a disaster
正解：B
質問 # 143
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
正解：
解説：
質問 # 144
A network engineer is using a Cisco UCS environment connected to a Fibre Channel storage array. The Cisco UCS environment must be connected to an existing SAN network, and several Cisco MDS 9000 Series Switches must be added to increase storage density. The solution must not exhaust the SAN network from the list of available domain IDs after connecting Also, most of the SAN traffic must be mapped from the Cisco UCS blades to a specific group of the fabric interconnect ports.
Which two features must be deployed to meet these requirements? (Choose two.)
- A. N-Port lD virtualization
- B. static PIN grouping
- C. dynamic port pinning
- D. priority flow control
- E. end host mode
正解：A、E
質問 # 145
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?
- A. Update the applled Fibre Channel adapter policy.
- B. Enable persistent binding in the vHBA policy.
- C. Update the applled global QoS policy.
- D. Include a SAN pin group in the vHBA policy.
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt
/3-2/b_UCSM_GUI_Storage_Management_Guide_3_2
/b_UCSM_GUI_Storage_Management_Guide_3_2_chapter_0110.pdf
質問 # 146
Refer to the exhibit. An engineer is configuring a QoS policy with these requirements:
- Match-all AF11 traffic and set it to a DSCP value of 14.
- The committed rate must be 10 Mbps with a committed burst rate of
1000 ms.
- Drop any AF11 traffic that violates these settings.
- Any traffic other than af11 must have a DSCP value of 0.
The given class-map configuration already exists. Which solution must the engineer use to meet the requirements?
- A.
- B.
- C.
- D.
正解：C
質問 # 147
Refer to the exhibit A Cisco engineer is configuring Cisco Nexus 7000 Series Switches. To simplify initial configuration verification and vPC+/HSRP troubleshooting, the engineer configures the primary vPC+ peer device with the FHRP active router highest priority. The primary FHRP device responds to ARP requests, even though the secondary vPC+ device also forwards the data traffic. Which configuration enables the Layer
3 connectivity from each vPC* peer device?
- A. Ensure that the enhanced Layer 2 license has been installed.
- B. Set a restore timer that delays the vPC+ restart.
- C. Configure a VLAN network interlace for the same VLAN from both devices.
- D. Manually configure virtual MAC addresses tor any FHRP protocol.
正解：A
質問 # 148
A company is planning to improve the segmentation of its data center network to isolate traffic of different clients across various parts of the facility. The solution must be highly scalable and provide flexible traffic isolation for a growing number of clients. Which action must be taken to best meet the requirements?
- A. Enable VXLAN with Border Gateway Protocol EVPN to provide separation and granular routing control.
- B. Implement VXLAN with IP-based VLAN segmentation to provide separation for each client while using standard Layer 3 routing.
- C. Configure VXLAN Multi-Tenant mode to segregate traffic by using different network identifiers.
- D. Implement VRF-Lite to segment traffic between different network environments.
正解：A
解説：
VXLAN with BGP EVPN control plane scales to thousands of tenants by using EVPN Route-Type advertisements for MAC and IP-to-VNI mappings. This approach delivers flexible, multitenant isolation and optimizes inter-VNI routing without flooding, making it ideal for a growing client base.
質問 # 149
An engineer must design a disaster recovery solution for a Cisco ACI Multi-Site network. One requirement is that the applications must have seamless IP addressing across sites. The solution must also be highly resilient and support Layer 2 adjacency. Which design meets these requirements?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
正解：D
質問 # 150
Refer to the exhibit.
Refer to the exhibit. An engineer deployed a VXLAN fabric with this configuration:
* interface VLAN 100 on VTEP1 with no IP address
* interface VLAN 200 on VTEP4 with no IP address
Which set of actions must the engineer take to ensure that host A communicates with host B?
- A. Associate VN110000 to VRF Application on VTEP4.
Associate VNI 20000 lo VRF Web on VTEP1. - B. Associate VNI 20000 to VRF Application on VTEP1.
Associate VNI 20000 to VRF Web on VTEP1. - C. Associate VN110000 to VRF Web on VTEP4.
Associate VNI 10000 to VRF Application on VTEP1. - D. Associate VNI 20000 to VRF Web on VTEP1.
Associate VNI 10000 to VRF Application on VTEP1.
正解：D
質問 # 151
......
2026年最新の実際にある検証済みの300-610問題集：https://www.goshiken.com/Cisco/300-610-mondaishu.html
合格させる300-610試験で更新された330問題あります：https://drive.google.com/open?id=1GC2h7OR447ArOzK3jHX4xOncBz4FM9pE