別格で売上ナンバーワン2V0-41.20試験にはは2023年最新のVMware練習問試験合格させます [Q49-Q66]

Share

別格で売上ナンバーワン2V0-41.20試験にはは2023年最新のVMware練習問試験合格させます

VCP-NV問題集で2V0-41.20試験完全版問題で試験学習ガイド

質問 # 49
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?

  • A. Uplink Profile
  • B. N-VDS/VDS Profile
  • C. Transport Node Profile
  • D. Host Switch Profile

正解:A


質問 # 50
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

  • A. set service manager log-level debug
  • B. set service manager logging-level debug
  • C. set service nsx-manager logging-level debug
  • D. set service nsx-manager log-level debug

正解:B

解説:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646


質問 # 51
An administrator has a requirement to have consistent policy configuration and enforcement across NSXT instances. What feature of NSX-T Data Center fulfills this requirement?

  • A. Multi-hypervisor support
  • B. Policy-driven configuration
  • C. Federation
  • D. Load balancer

正解:B


質問 # 52
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

  • A. set service manager log-level debug
  • B. set service manager logging-level debug
  • C. set service nsx-manager logging-level debug
  • D. set service nsx-manager log-level debug

正解:B

解説:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html


質問 # 53
Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)

  • A. Identify security vulnerabilities in the workloads.
  • B. Identify risk and reputation of accessed websites.
  • C. Gain insight about micro-segmentation traffic flows.
  • D. Use agentless antivirus with Guest Introspection.
  • E. Quarantine workloads based on vulnerabilities.

正解:A、E


質問 # 54
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)

  • A. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  • B. The virtual machines running on the KVM Transport Node are not connected to the VDS.
  • C. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
  • D. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
  • E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.

正解:A、C


質問 # 55
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

  • A. Route Aggregation
  • B. Graceful Restart
  • C. Local AS
    The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
    * Local AS
    * Graceful restart
    * Graceful restart timer
    * Graceful restart stale timer
    * Multipath relax
    Inter-SR iBGP is not supported in VRF gateways.
    BGP can be enabled or disabled per VRF gateway.
    Route aggregation and BGP neighbors are local configurations per VRF.
  • D. Route Distribution
  • E. BGP Neighbors

正解:A、E


質問 # 56
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?

  • A. set cli-timeout 0
  • B. nsxcli ssh session on
  • C. set cli ssh timeout 0
  • D. set esxcli ssh session off

正解:A


質問 # 57
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh list-interface <VM Name>
  • B. virsh show <VM Name> | grep interfaceid
  • C. virsh dumpxml <VM Name> | grep interfaceid
  • D. virsh get-interface <VM Name>

正解:C

解説:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


質問 # 58
Which step must be performed before deploying an additional NSX Manager from the NSX-T UI?

  • A. Configure the Virtual IP of the cluster.
  • B. Register vCenter Server as a Compute Manager.
  • C. Create an Edge Cluster.
  • D. Prepare the ESXi hosts as Transport Nodes.

正解:B


質問 # 59
Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?

  • A. Uplink Profile
  • B. Host Profile
  • C. Transport Node Profile
  • D. Switching Profile

正解:C

解説:
Explanation/Reference:


質問 # 60
When running nsxcli on an ESXi host, which command will show the Replication mode?

  • A. get logical-switch <Logical-Switch-UUID>
  • B. get logical-switch status
  • C. get logical-switch <Local-Switch-UUID> status
  • D. get logical-switches

正解:A

解説:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202


質問 # 61
Which statement is true about an alarm in a Suppressed state?

  • A. An alarm can be suppressed for a specific duration in days.
  • B. An alarm can be suppressed for a specific duration in seconds.
  • C. An alarm can be suppressed for a specific duration in minutes.
  • D. An alarm can be suppressed for a specific duration in hours.

正解:D

解説:
Explanation
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-9
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved."
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE


質問 # 62
Which three different transport nodes could be configured in the data plane? (Choose three.)

  • A. ESXi and Hyper-V
  • B. ESXi and KVM
  • C. NSX Edge VM on KVM
  • D. Bare Metal server
  • E. VM or Bare Metal NSX Edge
  • F. vShield Edge VM

正解:B、D、E


質問 # 63
Which component does the hyperbus interface (vmk50) provide network connectivity to?

  • A. virtual machines and containers running across transport nodes
  • B. containers running on ESXi/KVM transport nodes
  • C. virtual machines running on the same hypervisor
  • D. virtual machines running in the same segment

正解:B


質問 # 64
Which three services are compatible with VRF Lite? (Choose three.)

  • A. VPN
  • B. Intrusion Detection
  • C. DHCP
  • D. NAT
  • E. Load Balancer

正解:B、C、D

解説:
Explanation
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.


質問 # 65
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)

  • A. esxcfg-nics -1
  • B. esxcfg-vmknic -1
  • C. net-dvs
  • D. esxcli network ip interface ipv4 get
  • E. esxcli network nic list

正解:B、D


質問 # 66
......

最適な道は練習テストVMware 2V0-41.20問題集:https://www.goshiken.com/VMware/2V0-41.20-mondaishu.html