[2023年12月] 今すぐダウンロード!リアル VMware 2V0-41.20 試験問題集テストエンジン試験問題 [Q54-Q69]

Share

[2023年12月] 今すぐダウンロード!リアルVMware 2V0-41.20試験問題集テストエンジン試験問題

最新2V0-41.20テスト問題集を試そう!最新VMware試験合格させます

質問 # 54
An NSX administrator would like to configure syslog for a KVM transport node. Which host log files could be exported to a remote syslog server?

  • A. /var/log/cfgAgent.log
  • B. /var/log/cloudnet/nsx-ccp.log
  • C. /var/log/nsx-audit.log
  • D. /var/log/vmware/nsx-syslog

正解:D


質問 # 55
Which discovery protocol is supported for hypervisor transport nodes?

  • A. Adobe Real-time CDP
  • B. Neighbor Discovery Protocol
  • C. Cisco Discovery Protocol
  • D. Link Layer Discovery Protocol

正解:D


質問 # 56
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)

  • A. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
  • B. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
  • C. The virtual machines running on the KVM Transport Node are not connected to the VDS.
  • D. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  • E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.

正解:D、E


質問 # 57
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh show <VM Name> | grep interfaceid
  • B. virsh list-interface <VM Name>
  • C. virsh get-interface <VM Name>
  • D. virsh dumpxml <VM Name> | grep interfaceid

正解:D

解説:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


質問 # 58
How does Traceflow tool identify issues in a network?

  • A. Injects ICMP traffic into the data plane and observes the results in the control plane.
  • B. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
  • C. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
  • D. Injects synthetic traffic into the data plane and observes the results in the control plane.

正解:D


質問 # 59
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

  • A. get timezone
  • B. set ntp-server
  • C. set time-server
  • D. set timezone

正解:B


質問 # 60
Which statement describes the VMware Virtual Cloud Network Vision?

  • A. Virtual Cloud Network connects and protects virtual machines running in vSphere environments.
  • B. Virtual Cloud Network connects and protects applications, regardless of their physical locations.
  • C. Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.
  • D. Virtual Cloud Network connects and protects virtual machines running in KVM environments.

正解:C


質問 # 61
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

  • A. set service manager logging-level debug
  • B. set service nsx-manager log-level debug
  • C. set service manager log-level debug
  • D. set service nsx-manager logging-level debug

正解:A

解説:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html


質問 # 62
Where are Distributed Firewall logs containing access decisions stored?

  • A. NSX API
  • B. NSX Edge
  • C. Hypervisor transport node
  • D. NSX Manager

正解:C

解説:
Explanation
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A


質問 # 63
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A. MONITORING
  • B. GROUPING
  • C. FABRIC
  • D. SYSTEM

正解:C

解説:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


質問 # 64
What are three characteristics of a transport zone? (Choose three.)

  • A. optional for creating a segment
  • B. configured with a Single N-VDS
  • C. configured with multiple N-VDS
  • D. defines the potential reach of transport nodes
  • E. defines the scope and reachability of a Segment

正解:B、D、E


質問 # 65
Which CLI command shows syslog on NSX Manager?

  • A. get log-file auth.log
  • B. /var/log/sysloq/syslog.log
  • C. show log manager follow
  • D. get log-file syslog

正解:D

解説:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html


質問 # 66
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

  • A. Information
  • B. Advertise All LB SNAT IP Routes
  • C. Advertise All LB VIP Routes
  • D. Advertise All NAT Routes
  • E. All Static Routes

正解:B、C

解説:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html


質問 # 67
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

  • A. Information
  • B. Advertise All LB VIP Routes
  • C. Advertise All LB SNAT IP Routes
  • D. Advertise All NAT Routes
  • E. All Static Routes

正解:B、D


質問 # 68
Which three protocols could an NSX administrator use to transfer log messages to a remote log server?
(Choose three.)

  • A. HTTPS
  • B. SSH
  • C. SSL
  • D. UDP
  • E. TCP
  • F. TLS

正解:D、E、F

解説:
Explanation
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-p


質問 # 69
......


VMware 2V0-41.20、Professional VMware NSX-T Data Center試験は、候補者のVMware NSX-T Data Centerに関する知識、スキル、能力をテストするプロフェッショナルレベルの認定です。VMware NSX-T Data Centerは、マイクロセグメンテーションを促進し、非常に俊敏で柔軟なデータセンター環境を作成するネットワーク仮想化およびセキュリティプラットフォームです。この認定試験は、ベストプラクティス、アーキテクチャコンセプト、および管理ツールを使用してNSX-T Data Center 3.x環境をインストール、設定、トラブルシューティングする能力を個人の能力を検証することを目的としています。

 

あなたを必ず合格させる2V0-41.20問題集PDF2023年最新のに更新された95問あります:https://www.goshiken.com/VMware/2V0-41.20-mondaishu.html