2023年最新の認定サンプル問題2V0-41.20問題集と練習試験合格させます
2V0-41.20豪華セット学習ガイドにはオンライン試験エンジン
VMware 2V0-41.20、Professional VMware NSX-T Data Center試験は、候補者のVMware NSX-T Data Centerに関する知識、スキル、能力をテストするプロフェッショナルレベルの認定です。VMware NSX-T Data Centerは、マイクロセグメンテーションを促進し、非常に俊敏で柔軟なデータセンター環境を作成するネットワーク仮想化およびセキュリティプラットフォームです。この認定試験は、ベストプラクティス、アーキテクチャコンセプト、および管理ツールを使用してNSX-T Data Center 3.x環境をインストール、設定、トラブルシューティングする能力を個人の能力を検証することを目的としています。
質問 # 16
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. vSphere Distributed Switch 6.5
- B. MTU 1400
- C. MTU 1600
- D. vSphere Distributed Switch 7.0
- E. MTU 1500
正解：C、D
質問 # 17
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)
- A. 1:1 NAT
- B. Port NAT
- C. Reflexive NAT
- D. Source NAT
- E. Destination NAT
正解：D、E
質問 # 18
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel state
- B. get host-switch <Host-Switch-Name> tunnels
- C. get transport-node tunnel status
- D. get host-switch <Host-Switch-Name> tunnel status
正解：B
解説：
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
質問 # 19
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. ipconfig
- B. debug
- C. tcpdump
- D. ifconfig
正解：D
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html
質問 # 20
Which statement Is true regarding the audit user account? (Choose two.)
- A. The audit user has read-write access to the NSX Manager.
- B. The admin user must set the password for the audit account to log in to NSX Manager.
- C. The administrator must run the set audit user password <password> command.
- D. The administrator must run the set user audit password <password> command.
- E. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
正解：B、D
質問 # 21
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
正解：B、D
解説：
Explanation
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
質問 # 22
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch status
- B. get logical-switch <Local-Switch-UUID> status
- C. get logical-switch <Logical-Switch-UUID>
- D. get logical-switches
正解：C
質問 # 23
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. must contain only one type of edge nodes (VM or bare metal)
- B. must have only active-active edge nodes
- C. can have a maximum of 10 edge nodes
- D. can have a maximum of 8 edge nodes
- E. can contain multiple types of edge nodes (VM or bare metal)
正解：C、E
解説：
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html
質問 # 24
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)
- A. The virtual machines running on the KVM Transport Node are not connected to the VDS.
- B. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
- C. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.
- D. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
- E. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
正解：B、D
質問 # 25
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi
transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Switch Visualization
- B. Port Mirroring
- C. IPFIX
- D. Activity Monitoring
正解：A
質問 # 26
Which CLI command shows syslog on NSX Manager?
- A. show log manager follow
- B. /var/log/sysloq/syslog.log
- C. get log-file auth.log
- D. get log-file syslog
正解：D
質問 # 27
How does the Traceflow tool identify issues in a network?
- A. Injects ICMP traffic into the data plane and observes the results in the control plane.
- B. Injects synthetic traffic into the data plane and observes the results in the control plane.
- C. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
- D. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
正解：B
質問 # 28
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch status
- B. get logical-switch <Local-Switch-UUID> status
- C. get logical-switch <Logical-Switch-UUID>
- D. get logical-switches
正解：C
解説：
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
質問 # 29
An administrator has a requirement to have consistent policy configuration and enforcement across NSXT instances. What feature of NSX-T Data Center fulfills this requirement?
- A. Policy-driven configuration
- B. Multi-hypervisor support
- C. Federation
- D. Load balancer
正解：A
質問 # 30
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is created.
正解：A
解説：
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
質問 # 31
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. vm-support
- B. set support-bundle file vcpnv.tgz
- C. get support-bundle file vcpnv.tgz
- D. esxcli system syslog config logger set --id=nsxmanager
正解：C
解説：
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
質問 # 32
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is created.
正解：A
質問 # 33
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
正解：B、D
解説：
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
質問 # 34
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Aggregation
- B. Route Distribution
- C. Graceful Restart
- D. BGP Neighbors
- E. Local AS
正解：A、D
解説：
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
質問 # 35
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?
- A. Bidirectional Forwarding Detection (BFD)
- B. Virtual Router Redundancy Protocol (VRRP)
- C. Host Standby Router Protocol (HSRP)
- D. Beacon Probing (BP)
正解：A
質問 # 36
......
VMware 2V0-41.20認定試験に合格するためには、NSX-Tデータセンターソリューションの強い理解力を持ち、その知識を実世界のシナリオで適用できる能力が必要です。この試験は、70問の多肢選択問題で構成され、受験者には120分間の時間が与えられます。認定を取得するには、500点中300点以上の合格点が必要です。この試験に合格することは、雇用主や同僚に、候補者がvSphere環境でVMware NSX-Tデータセンターソリューションを実装および管理するために必要なスキルと知識を持っていることを示すことになります。
2V0-41.20問題集レビュー専門クイズで学習材料：https://www.goshiken.com/VMware/2V0-41.20-mondaishu.html