無料HPE6-A75サンプル問題で100%カバー率のリアル試験問題（更新された62問あります)
今すぐダウンロード！リアルHP HPE6-A75試験問題集テストエンジン試験問題
HP HPE6-A75 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 30
Refer to the exhibit.
A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?
- A. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.
- B. The standby selects the port on the designated forwarder for the aggregation.
- C. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
- D. The standby uses its own port in the link aggregation to forward the fabric.
正解: D
質問 31
Refer to the exhibit.
An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?
- A. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
- B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
- C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
- D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
- E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
正解: D
質問 32
What is true about clustering and AP connections to cluster members?
- A. During rebalancing, the active load is redistributed first.
- B. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
- C. AP load balancing is disabled by default.
- D. The AP will always stay connected to the LMS IP address configured in the AP profile.
正解: C
質問 33
Refer to the exhibit.
When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value 'securelogin.arubanetworks.com' used for?
- A. for ClearPass to send a RADIUS request to the NAD
- B. for the client to POST the user credentials to the NAD
- C. for appending to the Web Login URL, before the page name
- D. for appending to the Web Login URL, after the page name.
- E. for ClearPass to send a TACACS+ request to the NAD
正解: B
質問 34
Refer to the exhibit.
Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?
- A. Only the attribute value of company can be used in role mapping policies, not the other attributes.
- B. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.
- C. The attribute values of department and memberOf are directly applied as ClearPass roles.
- D. Only the attribute values of department and memberOf can be used in role mapping policies.
- E. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.
正解: C
質問 35
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?
- A. To send a RADIUS CoA message from the ClearPass server to the client
- B. To disconnect the user for 30 seconds when they are in an unhealthy posture state
- C. To remediate the client applications and firewall do that updates can be installed
- D. To force the user to re-authenticate and run through the service flow again
- E. To blacklist the user when they are in an unhealthy posture state
正解: A
質問 36
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?
- A. an RMON alarm
- B. an lP SLA profile
- C. an SNMP trap
- D. an auto-config server
正解: C
質問 37
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?
- A. bulk configuration
- B. disaster recovery
- C. restore config
- D. auto-rollback
正解: D
質問 38
Refer to the exhibit.
Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
正解: B
質問 39
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?
- A. show switches
- B. show lc-cluster group-membership
- C. show aaa cluster essid
- D. show ap active
正解: B
質問 40
Refer to the exhibit.
An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?
- A. Move 100 licenses from the CampusC pool to the global pool.
- B. Add 100 more AP licenses and assign them to the CampusA pool.
- C. Allow CampusA to share from the CampusC pool.
- D. Add 100 more AP licenses to the global pool.
正解: B
質問 41
Refer to the exhibit.
Based on the configuration of me create_user form shown, which statement accurately describes the status?
- A. The visitor_phone field will be visible to the guest users in the web login page.
- B. The visitor_company field will be visible to operators creating the account.
- C. The visitor_phone field will be visible to operators creating the account.
- D. The visitor_company field will be visible to the guest users when they access the web login page.
- E. The email field will be visible to guest users when they access the web login page.
正解: E
質問 42
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- B. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- C. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
- D. Have the MultiZone APs initially boot from the standalone controller in the data zone.
正解: C
質問 43
Which statement is true about the databases in ClearPass?
- A. Entries in the local user database cannot be modified.
- B. A Static host list can only contain a list of IP addresses.
- C. The endpoints database can only be populated by manually adding MAC addresses to the table.
- D. Entries in the guest user database can be deleted.
- E. Entries in the guest user database do not expire.
正解: E
質問 44
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
- A. 802.1X policy
- B. Firewall policy
- C. AAA policy
- D. User role
正解: B
質問 45
Refer to the exhibit.
Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?
- A. The device will be disconnected from and reconnected to the network after Onboarding is completed.
- B. The device's onboard authorization request will be denied.
- C. The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.
- D. After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.
- E. The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.
正解: A
質問 46
Which is a valid policy simulation types in ClearPass? (Select three.)
- A. Role Mapping
- B. Endpoint Profiler
- C. Enforcement Policy
- D. Chained simulation
- E. Posture token derivation
正解: A,C,D
質問 47
......
最新HPE6-A75テスト問題集を試そう！更新されたHP試験が合格できます：https://www.goshiken.com/HP/HPE6-A75-mondaishu.html
検証済み！HPE6-A75問題集と解答でHPE6-A75テストエンジン正確解答付き：https://drive.google.com/open?id=19adqRczzs5oqXnBZbEvnmX9K6HIDv0uY