[Q27-Q50] HPE6-A75認定で究極のガイド [2024年更新]

Share

HPE6-A75認定で究極のガイド [2024年更新]

HPE6-A75練習試験と学習ガイドは厳密検証された


HP HPE6-A75試験は、90分以内に回答する必要がある60の複数選択質問で構成されています。この試験は英語と日本語で入手でき、世界中のピアソンvueテストセンターで撮影できます。試験に合格するには、候補者は少なくとも70％を獲得する必要があります。成功した候補者は、3年間有効なAruba Certified Edge Professional Certificationを受け取ります。この認定は、アルバソリューションと協力し、雇用主とクライアントに専門知識を実証したいIT専門家にとって貴重な資産です。

 

質問 # 27
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

  • A. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.
  • B. Only the attribute value of company can be used in role mapping policies, not the other attributes.
  • C. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.
  • D. The attribute values of department and memberOf are directly applied as ClearPass roles.
  • E. Only the attribute values of department and memberOf can be used in role mapping policies.

正解：D


質問 # 28
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?

  • A. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.
  • B. Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.
  • C. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.
  • D. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

正解：A


質問 # 29
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

  • A. After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.
  • B. The device will be disconnected from and reconnected to the network after Onboarding is completed.
  • C. The device's onboard authorization request will be denied.
  • D. The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.
  • E. The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP- TLS authentication is performed.

正解：B


質問 # 30
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

  • A. Onboard Pre-Provisioning - Aruba
  • B. Deny Access Profile
  • C. Onboard Post-Provisioning - Aruba
  • D. Onboard Device Repository

正解：A


質問 # 31
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
- A Mobility Master (MM) manages the cluster.
- The cluster contains two controllers: Cl and C2.
- API and AP2 use C1 as their Active AP Anchor Controller (A-AAC) with
C2 as their Standby AAC (S-AAC).
- AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A- UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

  • A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
  • B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
  • C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
  • D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.

正解：B

解説：
The user VLAN or AP group will not directly affect whether cluster is L2 or L3. Each MC will probe its VLANs and will only choose L3 if the VLAN config is mismatched or the MC itself is in a different VLAN itself. The cluster should be L2 thus the APs will retain A-AAC unless rebalance or failure. The user will do the same for the U-AAC.


質問 # 32
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

  • A. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.
  • B. A new Virtual IP address should be created for each NAD.
  • C. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
  • D. The NAD should be configured with the Virtual IP address for RADIUS authentications on the
    802.1x network.
  • E. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

正解：D、E


質問 # 33
Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue.
The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?

  • A. an issue with queuing, caused by mismatched QoS settings
  • B. asymmetric routing introduced by a routing configuration error
  • C. mismatched IP addresses on the VLAN for the link
  • D. a hardware issue, such as a broken cable

正解：D


質問 # 34
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

  • A. disaster recovery
  • B. restore config
  • C. auto-rollback
  • D. bulk configuration

正解：C


質問 # 35
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?

  • A. Clustering
  • B. Zones
  • C. AirMatch
  • D. ARM

正解：C


質問 # 36
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?

  • A. To send a RADIUS CoA message from the ClearPass server to the client
  • B. To blacklist the user when they are in an unhealthy posture state
  • C. To disconnect the user for 30 seconds when they are in an unhealthy posture state
  • D. To remediate the client applications and firewall do that updates can be installed
  • E. To force the user to re-authenticate and run through the service flow again

正解：A


質問 # 37
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

  • A. Onboard Pre-Provisioning - Aruba
  • B. Deny Access Profile
  • C. Onboard Post-Provisioning - Aruba
  • D. Onboard Device Repository

正解：A


質問 # 38
An administrator deploys Aruba Mobility Controller 7005s to a company's branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?

  • A. console disable
  • B. no console enable
  • C. mgmt-user console-block
  • D. no mgmt-user console

正解：C


質問 # 39
Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

  • A. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
  • B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
  • C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
  • D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
  • E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.

正解：B


質問 # 40
Refer to the exhibit.

An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

  • A. Executive
  • B. Vendor
  • C. iOS Device
  • D. HR Local
  • E. Remote Employee

正解：D、E


質問 # 41
Which situation requires an AOS-Switch interface to support MAC-based VLANs?

  • A. The interface has an extended MAC ACL applied to it in the outbound direction, and it uses VLAN ID as one of the criteria for rules.
  • B. The interface has an extended MAC ACL applied to it in the inbound direction, and it has multiple tagged VLAN assignments.
  • C. The interface is configured to support 802.1X in user-based mode, connects to more than one endpoint at a time, and users are assigned to different dynamic VLANs.
  • D. The interface is configured to support Local MAC Authentication (LMA), authenticates endpoints against a non-default MAC group, and limits the address count to 1.

正解：B


質問 # 42
Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

  • A. The visitor_company field will be visible to the guest users when they access the web login page.
  • B. The visitor_company field will be visible to operators creating the account.
  • C. The visitor_phone field will be visible to operators creating the account.
  • D. The email field will be visible to guest users when they access the web login page.
  • E. The visitor_phone field will be visible to the guest users in the web login page.

正解：D


質問 # 43
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2.
What is the difference?

  • A. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type
    1 metric does not permit external route aggregation.
  • B. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
  • C. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
  • D. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

正解：D

解説：
The difference between the two is in the way the cost (metric) of the route is being calculated.
The cost of a type 2 route is always the external cost, irrespective of the interior cost to reach that route. A type 1 cost is the addition of the external cost and the internal cost used to reach that route.


質問 # 44
Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

  • A. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
  • B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
  • C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
  • D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
  • E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.

正解：B


質問 # 45
Refer to the exhibit.

Which statements accurately describe the status of the Onboarded devices in the configuration tor the network settings shown? (Select two.)

  • A. They will use WPA2-PSK with AES when connecting to the SSID.
  • B. They will connect to secure_emp SSID after provisioning.
  • C. They will connect to Employee_Secure SSID for provisioning their devices.
  • D. They will connect to Employee_Secure SSID after provisioning.
  • E. They will perform 802.1X authentication when connecting to the SSID.

正解：B、E


質問 # 46
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

  • A. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
  • B. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
  • C. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
  • D. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.

正解：C


質問 # 47
What must an OSPF router do when it receives a link state update?

  • A. It must re-establish adjacency with its Designated Router and Backup DR.
  • B. It must initiate a graceful restart timer.
  • C. It must run the shortest path first algorithm.
  • D. It must participate in a new election for the Designated Router and Backup DR.

正解：C


質問 # 48
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

  • A. Add 100 more AP licenses to the global pool.
  • B. Add 100 more AP licenses and assign them to the CampusA pool.
  • C. Allow CampusA to share from the CampusC pool.
  • D. Move 100 licenses from the CampusC pool to the global pool.

正解：B


質問 # 49
An AOS-Switch uses tunneled node. What is a best practice for the path between an AOS-Switch and its Mobility Controller?

  • A. The path crosses no VLAN boundaries
  • B. The path implements MACsec
  • C. The path can support jumbo frames
  • D. The path has a device that applies NAT

正解：C


質問 # 50
......


HPのHPE6-A75資格は、アルバエッジソリューションの知識とスキルを持つ個人の認証として、世界的に認知されています。この資格を取得することは、アルバエッジソリューションの設計、展開、管理における熟練度を示し、現代のIT産業において貴重なスキルセットとなります。この資格は、ITプロフェッショナルがキャリアを進め、求人機会を増やし、高い給与を得るのに役立ちます。

 

究極のガイドはHPE6-A75最新時間限定！今すぐダウンロード！：https://www.goshiken.com/HP/HPE6-A75-mondaishu.html

2024年最新のな厳密検証されたHPE6-A75学習合格ガイドでベズトお試しセット：https://drive.google.com/open?id=1hrqfh9Lp6DmIhmxQT73CM6HNjb3BSfr6

関するブログ

もっと
HPE6-A75無料問題集