2022年最新の実際のGoShiken 300-625問題集PDFで100%合格率を保証します
無料Cisco 300-625試験問題と解答
Cisco 300-625 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
質問 37
Which action must be performed to deactivate a VSAN without losing its configuration?
- A. Delete it.
- B. Rename it
- C. Isolate it.
- D. Suspend it.
正解: D
質問 38
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. Merge control is disabled.
- B. The fabric is locked by admin on switch-2.
- C. Hard zoning is enabled.
- D. The fabric is locked by admin on another switch.
- E. The switch has a conflicting domain ID.
正解: B
解説:
Section: MDS Troubleshooting
質問 39
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show telemetry pipeline stats
- C. show analytics system-load
- D. show telemetry control stats
正解: A
解説:
Section: Management and Monitoring
質問 40
Drag and drop the boot issues from the left onto the correct solutions on the right.
正解:
解説:
質問 41
DRAG DROP
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.
Select and Place:
正解:
解説:
Section: Implementation
Explanation/Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/ guides/cli_3_3_1/npv.html#wp1502832
質問 42
A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration Which location is checked first when the switch enters POAP mode?
- A. USB device that contains the software image files and the switch configuration file
- B. TFTP server where the necessary configuration files are downloaded
- C. DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
- D. HTTP server where the URL is used to download the software image
正解: C
質問 43
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. IVR NAT
- B. virtual domains
- C. auto topology
- D. transit VSANs
正解: A
解説:
Section: Implementation
質問 44
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. clear
- C. force
- D. commit
正解: B
質問 45
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel.
Which SAN switch feature must be implemented?
- A. VSAN scoping
- B. IVR
- C. zoning merge over LAN
- D. FCIP
正解: D
質問 46
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. gRPC transport
- B. RPC transport
- C. GPB transport
- D. gRPC encoding
- E. GPB encoding
正解: A,E
質問 47
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non-disruptive upgrade?
- A. The Cisco Fabric Services operation in progress.
- B. The Fibre Channel storage target is connected.
- C. The Fibre Channel host initiator is connected.
- D. The Fibre Channel and FCoE storage targets are connected.
正解: B
解説:
Section: MDS Troubleshooting
Explanation/Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/release/ notes/14116.16.html
質問 48
A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration. Which location is checked first when the switch enters POAP mode?
- A. DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
- B. TFTP server where the necessary configuration files are downloaded
- C. USB device that contains the software image files and the switch configuration file
- D. HTTP server where the URL is used to download the software image
正解: C
解説:
Section: Deployment
質問 49
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
- A. VSAN scoping
- B. IVR
- C. zoning merge over LAN
- D. FCIP
正解: D
質問 50
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Enable selective acknowledgment.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Disable PMTU discovery.
正解: A
解説:
Section: Implementation
質問 51
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?
- A. ROMMON
- B. BASH
- C. NX-OS
- D. BIOS
正解: C
解説:
Section: Deployment
質問 52
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches.
The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
- C. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
正解: D
質問 53
Refer to the exhibit.
What is the result of merging the fabric?
- A. The merged fabric IVR VSAN topology is set to activate.
- B. The merged fabric has NAT enabled.
- C. The merged fabric contains only service group Group1.
- D. The merge is invalid.
正解: C
解説:
Section: Implementation
質問 54
After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated.
What is a solution to the issue?
- A. Configure IVR NAT on the affected VSAN.
- B. Configure a static domain on the subordinate switch and reboot the switch.
- C. Add the received ID to the allowed list.
- D. Enable the FICON feature on the affected VSAN.
正解: C
質問 55
Refer to the exhibit.
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 1
- B. permit vsan 1-1000 must be configured as rule 5
- C. permit vsan 1-1000 must be configured under the VSAN policy deny
- D. permit vsan 1-1000 must be configured under the VSAN policy allow
正解: C
質問 56
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits.
- A. UEFI Secure Boot
- B. Cisco Secure Boot
- C. Secure Unique Device Identifier
- D. BIOS Secure Boot
正解: B
解説:
Section: Deployment
質問 57
......
検証済み300-625問題集と解答で最新300-625をダウンロード：https://www.goshiken.com/Cisco/300-625-mondaishu.html