[2022年02月] 検証済みCisco 300-625リアル豪華お試しセット試験問題集でPDF
300-625問題集PDF最新 [2022年最新] 究極の学習ガイド
Cisco 300-625 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 40
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the adrrarustrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset copy active-zoneset full-zoneset
- B. zoneset import interface fc1/1 vsan 10
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
正解: B
質問 41
After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?
- A. immediately
- B. at the scheduled time
- C. when the user logs out of a session
- D. when the user creates a new session
正解: A
質問 42
Refer to the exhibit. A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?
- A. from interface fc1/10
- B. from interface fc1/9
- C. per packet, balanced between interfaces fc1/9 and fc1/10
- D. per flow, balanced between interfaces fc1/9 and fc1/10
正解: D
質問 43
Drag and Drop Question
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
正解:
解説:
質問 44
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The same alias must be used in zoning as well as DPVM.
- B. All aliases being used are being configured in the same VSAN.
- C. The zone database must be distributed over the fabric.
- D. Aliases must be saved within a central database on the fabric.
正解: C
質問 45
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two,)
- A. The engineer can choose what will be the administrator account
- B. The engineer does not have the choice to enable or disable full roneset distribution
- C. The engineer can configure the default zone policy.
- D. The secure password standard is required.
- E. The engineer can configure the default switch port trunK mode
正解: C,D
質問 46
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0xxfc0e
- B. 0x8913
- C. 0x8906
- D. 0x8914
正解: D
質問 47
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
正解:
解説:
質問 48
Drag and Drop Question
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
正解:
解説:
質問 49
Drag and Drop Question
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
正解:
解説:
質問 50
After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?
- A. when the user creates a new session
- B. immediately
- C. at the scheduled time
- D. when the user logs out of a session
正解: A
質問 51
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
- A. The autoreconfigure option is disabled on both switches.
- B. The rcf-reject option is enabled on the interfaces.
- C. The rcf-reject option is disabled on the interfaces.
- D. The autoreconfigure option is enabled on both switches.
正解: A
解説:
Section: MDS Troubleshooting
Explanation/Reference:
質問 52
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0xxfc0e
- B. 0x8913
- C. 0x8906
- D. 0x8914
正解: D
解説:
Section: Implementation
質問 53
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. IVR NAT
- B. virtual domains
- C. auto topology
- D. transit VSANs
正解: A
質問 54
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric.
Which condition must the administrator consider while configuring this feature?
- A. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- B. All switches on the fabric must be configured for the same password.
- C. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
- D. NTP must be configured on all devices or the configuration fails.
正解: A
質問 55
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
- A. VSAN scoping
- B. IVR
- C. zoning merge over LAN
- D. FCIP
正解: D
質問 56
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show telemetry pipeline stats
- C. show analytics system-load
- D. show telemetry control stats
正解: A
質問 57
Refer to the exhibits.
A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1).
The engineer is then notified that there is a SAN outage (Exhibit 2) What is the cause of the outage?
- A. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.
- B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
- C. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
- D. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
正解: A
質問 58
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Enable selective acknowledgment.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Disable PMTU discovery.
正解: A
解説:
Section: Implementation
Explanation
質問 59
Which command identifies the application and the user that have a Cisco Fabric Services session open?
- A. show zoneset active
- B. show cfs application
- C. show device-alias database
- D. show cfs lock
正解: B
質問 60
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. E
- B. F
- C. N
- D. NP
正解: D
質問 61
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. Dynamic Port VSAN Membership
- B. Cisco Fabric Services distribution over Fibre Channel
- C. local switching of east-west traffic
- D. E Port connectivity to the core switch
正解: B
解説:
Section: Implementation
質問 62
......
あなたを合格させるCisco試験で300-625試験問題集：https://www.goshiken.com/Cisco/300-625-mondaishu.html