2022年最新の有効なHPE2-T37試験最新問題で2022年最新の学習ガイド
HPE2-T37認定で究極のガイド [2022年更新]
質問 23
What is required to add remote frame link topology to HPE OneView?
- A. Management ports of the remote frame link topology must be connected to the management LAN.
- B. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
正解: C
質問 24
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- B. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
- C. An external repository must be created, because standalone components are supported only In an external repository.
- D. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
正解: C
質問 25
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within server profile template and update all profiles.
- B. Set a specific workload profile using IL0 interface for each individual server.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile within Logical Interconnect Group and update all servers.
正解: C
質問 26
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- B. Ensure that the Link Aggregation Group time-out value matches the server set values.
- C. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- D. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
正解: A
質問 27
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Firmware deployment support dump
- C. Enclosure group support dump
- D. Maintenance console support dump
- E. Appliance support dump
正解: A,D
質問 28
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
正解:
解説:
質問 29
What is the best practice when deploying an HPE OneView appliance?
- A. Deploy two HPE OneView appliances and configure them in HA mode.
- B. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- C. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- D. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
正解: D
質問 30
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- B. to provide static IP addresses for an operating system running on a Compute Module
- C. to provide static IP addresses for storage systems managed in HPE OneView
- D. to provide static IP addresses to IL0 and interconnect modules if applicable
正解: B
質問 31
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks have Private Network' selected, which hides them from Compute Modules.
- D. The other networks are configured with a purpose other than General or Management.
正解: C
質問 32
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. The maximum supported number of the internal networks for logical interconnect is configured.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
正解: D
質問 33
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?
- A. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
- B. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
- C. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
- D. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
正解: D
質問 34
Which statement about M-LAG setup is true?
- A. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- B. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- C. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- D. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
正解: B
質問 35
What is a network set?
- A. It is a collection of all networks configured within HPE OneView regardless of network type.
- B. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
- C. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- D. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
正解: B
質問 36
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. An upgrade license must be purchased and deployed.
- B. Both FlexNlCs must be connected to the same network.
- C. The Compute Module profile must have exactly two connections defined.
- D. The sFlow option must be enabled and configured.
正解: D
質問 37
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE B-series SN6600B Fibre Channel Switch
- B. HPE Synergy Virtual Connect SE 32Gb FC Module
- C. HPE MSA 2062 Storage Array
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
正解: A,B
質問 38
Which components require an HPE OneView license for management?
- A. HPE Virtual Connect modules
- B. HPE Primera and HPE 3PAR
- C. Brocade and Cisco SAN Manager
- D. HPE Apollo XL 170r
正解: A
質問 39
......
HPE2-T37練習試験と学習ガイドは厳密検証されたにはGoShiken：https://www.goshiken.com/HP/HPE2-T37-mondaishu.html
2022年最新のな厳密検証された合格させるHPE2-T37学習ガイドベズトお試しセット：https://drive.google.com/open?id=1KmAHTRnbThChrnjzjLuF7x8ZPY9ypgab