2026年09月 HP HPE2-T37実際にある問題と100%カバー率リアル試験問題
HPE2-T37無料試験問題と解答PDF最新問題2026年09月
HP HPE2-T37試験は、ITプロフェッショナルがHPE OneViewを使用するスキルと知識を評価する認定試験です。この認定は、このプラットフォームを使用する能力を証明したいITプロフェッショナルにとって有価値であり、ITインフラ管理のキャリアアップに役立ちます。
質問 # 18
What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?
- A. REST API plugin is enabled for iLO
- B. IPMI credentials are configured for the iLO
- C. SSO certificate is added to the iLO
- D. Active Directory configuration is performed on iLO
正解：A
質問 # 19
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely.
How should you respond?
- A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
正解：A
解説：
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
Reference:
https://cdn.cnetcontent.com/syndication/feeds/hp-ent/inline-content/S6/5/0/5029A837AB821E112E962C FFA2E59E065568F85E_source.PDF
質問 # 20
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools. For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be marked as read-only using HPE OneView.
- B. The storage pool should be removed from HPE OneView using a PowerShell script.
- C. The storage pool state should be changed to discovered using HPE OneView.
- D. The storage pool should be disabled using the array management tool.
正解：D
質問 # 21
What is required to add remote frame link topology to HPE OneView?
- A. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
正解：B
質問 # 22
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. A dedicated license must be added to HPE OneView to enable this feature.
- B. There are not sufficient frames for highly available setup.
- C. Firmware on the master modules is too low to support highly available setup.
- D. Some master modules only support a redundant setup.
正解：D
質問 # 23
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE MSA 2062 Storage Array
- B. HPE Superdome Flex 280
- C. HPE Synergy Virtual Connect SE 32Gb FC Module
- D. HPE B-series SN6600B Fibre Channel Switch
- E. HPE Synergy 480 Compute Modules
正解：C、D
質問 # 24
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- D. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
正解：A
質問 # 25
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. Not all of the features will be available for HPE ProLiant G7 systems.
- B. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
- C. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
正解：C
質問 # 26
For which HPE OneView resource can manual orchestration method be used when updating the firmware?
- A. Server profile
- B. Logical interconnect
- C. Frame Link Module
- D. Logical enclosure
正解：A
質問 # 27
A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?
- A. Storage Array
- B. Compute Module
- C. Logical Enclosure
- D. Master Module
正解：B
質問 # 28
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?
- A. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
- B. A snapshot for imported volumes can be ceated only by using array management tools
- C. Imported volumes are treated as private volumes and can be only used boot volumes
- D. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface
正解：B
質問 # 29
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools.
For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be marked as read-only using HPE OneView.
- B. The storage pool should be removed from HPE OneView using a PowerShell script.
- C. The storage pool state should be changed to discovered using HPE OneView.
- D. The storage pool should be disabled using the array management tool.
正解：D
質問 # 30
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. Server profile affinity is configured to Device Day + server hardware.
- B. The enclosure group has to be updated to match the original enclosure group.
- C. IL0 firmware of the replacement server is different than firmware in broken server.
- D. The replacement server has more memory or CPUs than broken machine.
正解：C
質問 # 31
Refer to the exhibit.
Which statement about server connections is true?
- A. All connections within the server profile are using physical IDs
- B. LACP on downlinks is configured for Ethernet connection
- C. Ethernet connection is configured to boot from PXE
- D. Storage array is connected directly to an HPE Synergy frame
正解：C
質問 # 32
What is the best practice when deploying an HPE OneView appliance?
- A. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- B. Deploy two HPE OneView appliances and configure them in HA mode.
- C. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- D. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
正解：C
質問 # 33
Which location type can be selected when creating a remote schedule backup?
- A. SFTP
- B. FTP
- C. NFS
- D. CIFS
正解：A
解説：
When creating a remote scheduled backup in HPE OneView, the supported location type that can be selected is SFTP (Secure File Transfer Protocol). SFTP ensures secure transfer of backup files to a remote system by encrypting both commands and data, providing a secure method for backing up sensitive configuration information.
質問 # 34
......
HP HPE2-T37リアル2026年最新のブレーン問題集模擬試験問題集：https://www.goshiken.com/HP/HPE2-T37-mondaishu.html
最新HPE2-T37試験問題集で最近更新された117問題：https://drive.google.com/open?id=1liqX5cYHLrgysTVEHqcOC_JNhHyth5fP