[2023年11月22日] C_IBP_2302 PDF問題集にはあなたに不可欠なC_IBP_2302試験解答を合格に繋ぐ！
C_IBP_2302PDF解答で完璧な予見C_IBP_2302練習試験問題
SAP Certified Application Associate - SAP IBP for Supply Chain (C_IBP_2302)試験は、SAP Integrated Business Planning（IBP）ソフトウェアを使用したサプライチェーン計画についての候補者の知識と理解をテストするよう設計されています。認定はサプライチェーン計画、需要計画、サプライネットワーク計画、調達のポジションで働く人に最適であり、候補者のSAP IBP for Supply Chainの必須機能と機能の理解、SAP IBP for Supply Chainソリューションの設定、実装、およびメンテナンス能力を検証します。
質問 # 48
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.
- A. The key figure is stored and all editable.
- B. The key figure is stored and system editable.
- C. The key figure is calculated and system editable.
- D. The key figure is calculated and all editable.
正解：A
質問 # 49
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note: There are 2 correct answers to this question.
- A. Decoupling Points determination in SAP IBP for demand-driven replenishment
- B. Demand Sensing with Gradient Boosting (Full)
- C. Supply Heuristics in SAP IBP for sales and operations
- D. Charts creation in SAP Supply Chain Control Tower
正解：B、C
質問 # 50
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Maximum inventory
- C. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- D. Number of fair share segments Additional tiering costs (default) Inventory days of supply
正解：C
質問 # 51
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
- B. Minimum capacity utilization will result in pull production occurring.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Capacity leveling will be possible for production and storage resources.
正解：A、C
質問 # 52
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Reorder Point
- B. Target Pipeline Stock
- C. Target Cycle Stock
- D. Recommended Safety Stock
- E. Component Usage
正解：B、C、D
質問 # 53
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.
- A. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
- B. Key figures can be calculated across different planning levels.
- C. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- D. The calculation chain for a key figure must always result in a calculated key figure.
正解：A、B
質問 # 54
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Key figure type
- B. Modified date
- C. Scenario ID
- D. Attributes
- E. Reason code
正解：B、D、E
質問 # 55
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
- B. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
- C. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
- D. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
正解：A、B
質問 # 56
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Jobs in the Applications Jobs app
- B. Planning view templates in the SAP IBP add-in for Microsoft Excel
- C. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- D. Supply chain graph in Supply Chain Network app
正解：A、B
質問 # 57
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Both periods and profiles have start and end dates.
- B. Periods are identified by an integer and profiles by an alphanumeric prefix.
- C. Both periods and profiles are identified by a unique integer.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
正解：B、D
質問 # 58
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Seasonal Chart Types
- B. Geographic Chart Types
- C. Comparison Chart Types
- D. Trend Chart Types
- E. Simulation Chart Types
正解：A、C、D
質問 # 59
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Defining a different default planning area via the User Preferences.
- B. Add the system name and tenant information from the About section to the Home page.
- C. Setting a separate theme for the Home page in the Web UI.
- D. Having a different set of tiles in the Home group of apps.
正解：B、C
質問 # 60
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Target Service Level
- B. Transportation Lead Time Error CV
- C. Minimum Lot Size
- D. Holding Cost Percentage
正解：A、C
質問 # 61
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.
- A. Analyze Supply Usage
- B. Planning with Product Allocations
- C. Detailed Production Scheduling
- D. Gating Factors
正解：A、D
質問 # 62
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using a local member
- B. Using a key figure calculation
- C. Using a attribute as a key figure
- D. Using a appropriate period weight factor
正解：D
質問 # 63
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.
- A. Recommended Safety Stocks from Multistage Inventory Optimization
- B. Sales Order Quantities (both historical and future open orders)
- C. Forecast Error CV Calculated by Manage Forecast Error Calculations app
- D. Future Consensus Forecasts and Lagged Forecast Snapshots
正解：A、D
質問 # 64
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed?Note: There are 2 correct answers to this question.
- A. Push and Pull production models are used by the optimizer.
- B. Finite heuristics can achieve demand prioritization and pegging.
- C. Planning results can be generated faster by the optimizer.
- D. Prioritization of demand elements one by one is achieved by unconstrained heuristics.
正解：A、B
質問 # 65
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID2" ="$$PERIODID2CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID5" ="$$PERIODID5CU$$...)
- D. IF("PERIODID3" ="$$PERIODID3CU$$...)
正解：B
質問 # 66
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Minimum lot size
- B. Adjusted transport receipts
- C. Transportation lead times
- D. Maximum lot size
- E. Aggregated constraints
正解：B、C、D
質問 # 67
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Change the numbering hierarchy of the period IDs in the time profile.
- C. Change the past and future horizon of the levels in the time profile.
- D. Add a new time profile level to the time profile.
正解：A、C
質問 # 68
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Demand sensing of demand data using predictive analytics tools
- B. Detailed statistical analysis of demand data using predictive analytics tools
- C. Consideration of demand-driven analysis for buffer positioning.
- D. Embedded, on-the-fly demand analytics
正解：B、D
質問 # 69
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Specify a planning horizon in the planning area for each level of the assigned time profile.
- B. Assign the compound master data type and its component master data types.
- C. Configure at most two input key figures on the same planning level in a key figure calculation.
- D. Configure at least one calculated key figure for the planning area.
正解：A、B
質問 # 70
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Adjust for forecast bias in Forecast Error CV calculations
- B. Adjust Safety Stock Recommendations based on forecast error CV input
- C. Identifiy intermittent demand for Forecast Error CV calculations
- D. Propagate forecast error to upstream locations in a supply chain network
正解：A、B
質問 # 71
......
C_IBP_2302リアル試験問題と正確なCertified Application Associate - SAP IBP for Supply Chain (2302)PDF解答：https://www.goshiken.com/SAP/C_IBP_2302-mondaishu.html
リアルSAP試験の素晴らしい練習問題集でC_IBP_2302試験：https://drive.google.com/open?id=1Z2UBzMNzRdsPMh61qoazxqaQs8oL_rLd