2024年最新のに更新されたのはD-XTR-DS-A-24テストエンジンとPDFで完全版無料問題集保証！
最新のStorage Administrator D-XTR-DS-A-24実際の無料試験問題
EMC D-XTR-DS-A-24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 37
An XtremlO administrator wants to understand the I/O transfer process. What are the parts of a typical I/O transfer?
- A. Negotiation, header, data, and acknowledgement
- B. Metadata, header, data, and log
- C. Protocol, header, data, and address
- D. Protocol, header, data, and handshaking
正解：D
解説：
A typical I/O transfer involves several components that work together to ensure data is correctly sent and received. These components include:
* Protocol: This defines the rules for how data is transmitted between devices. It ensures that the sender and receiver are using a common language and standards.
* Header: The header contains metadata about the data being transferred, such as source and destination addresses, error checking codes, and sequencing information.
* Data: This is the actual payload or information that is being transferred.
* Handshaking: This part of the process involves the exchange of control messages before the actual data transfer begins. It establishes the parameters of the communication channel and confirms that both sender and receiver are ready for the transfer.
These components are essential for the successful completion of an I/O transfer, ensuring that data is accurately and reliably transmitted from one point to another.
References:
* The Dell XtremIO Design documents provide a detailed understanding of the product features, functionality, use cases, and configurations, which includes the I/O transfer process as a fundamental aspect of storage array operations1.
* Additional resources on I/O transfer processes can be found in the support documentation for the XtremIO Family on Dell's official website2.
質問 # 38
Where does XtremIO keep metadata at all times on an active cluster?
- A. XMS storage
- B. Snap shots
- C. Storage Controller trace disks
- D. Memory
正解：D
解説：
XtremIO maintains metadata in memory at all times on an active cluster. This in-memory metadata architecture is a key feature of XtremIO that significantly boosts performance.While metadata is kept in memory for runtime operations, it is also journaled, protected, and hardened to SSD to tolerate any failure event in the array, ensuring data integrity and system resilience1.
References:
* The blog post "XtremIO's In-Memory Metadata Architecture - Fact and Fiction" on Dell's official website provides a detailed explanation of how metadata is managed within the XtremIO system1.
* The document "Introduction to XtremIO X2 Storage Array" further elaborates on the system architecture and the role of metadata in the operation of the storage array2.
質問 # 39
What is an example of a Decision Support Systems (DSS) workload?
- A. Online banking applications
- B. Order Entry applications
- C. Data Warehouse
- D. Airline reservation systems
正解：C
解説：
Explore
A Decision Support System (DSS) is a computer-based tool designed to aid individuals and organizations in making informed decisions. It integrates data, models, and analytical tools to solve complex problems and support strategic planning.A DSS is particularly effective in handling large volumes of data and applying sophisticated algorithms to generate insights that guide effective choices1.
A Data Warehouse is an example of a DSS workload because it is a centralized repository for storing large amounts of data from multiple sources.Its primary purpose is to facilitate reporting and analysis1. Data Warehouses are designed to perform queries and analysis on historical data and are an integral part of business intelligence that supports decision-making processes.
References:
* A comprehensive explanation of what constitutes a DSS and its applications can be found in various resources, including those that define a Data Warehouse as a key component of DSS1.
* The "Introduction to XtremIO X2 Storage Array" document by Dell Technologies provides insights into the system features that support DSS workloads like Data Warehouses2.
質問 # 40
What should the I/O size be set to in a VMware VDI solution utilizing VAAI XCOPY on XtremIO?
- A. 16 kB
- B. 256 kB
- C. 4 MB
- D. 256 MB
正解：B
解説：
In a VMware VDI solution utilizing VAAI XCOPY on XtremIO, the I/O size should be set to 256 kB.This setting is recommended to optimize the performance of the storage array during XCOPY operations, which are used to offload the copying of data within the storage array to the array itself, freeing up host resources1.
References:
* The Dell support knowledge base article on using a VAAI claim rule to set the XCOPY size when using XtremIO for ESXi hosts recommends setting the XCOPY system value to 256 kB for XtremIO arrays1.
* Additional information on VAAI XCOPY and its configuration can be found in the "Introduction to XtremIO X2 Storage Array" document, which provides insights into the system features that support such operations2.
質問 # 41
What is true about the flow control feature when configuring the iSCSI SAN from the host to the XtremlO cluster?
- A. Disable flow control features on the server, switch(s) and array ports
- B. Enable flow control features on the server and array ports only
- C. Disable flow control features on the server and array ports only
- D. Enable flow control features on the server, switch(s) and array ports
正解：A
解説：
When configuring the iSCSI SAN from the host to the XtremIO cluster, it is recommended to disable flow control features on the server, switches, and array ports.Flow control can cause a performance impact by serializing the flow for iSCSI ports, which is not desirable in high-performance storage solutions like XtremIO1. Disabling flow control ensures that the storage array operates without the limitations that flow control can impose, thus maintaining optimal performance.
References:
* Dell EMC Switch Configuration Guide for iSCSI and Software-Defined Storage provides guidelines for the design and configuration of storage networks for iSCSI SAN, which includes recommendations on flow control settings2.
* Community discussions on Dell Technologies website where it is mentioned that the latest best practices advise against enabling flow control for iSCSI with XtremIO, as it limits performance1.
質問 # 42
How would a storage administrator navigate to different XtremIO clusters from the WebUl if the administrator has more than one cluster managed by the same XMS?
- A. Click the Inventory List button on the Navigation Menu
- B. Click on System Settings icon on the top Menu bar
- C. Click the Cluster Name on the Status bar at the bottom of the screen
- D. Click the Administration tab and locate the Cluster Name
正解：A
解説：
In a multi-cluster environment managed by the same XtremIO Management Server (XMS), a storage administrator can navigate between different XtremIO clusters using the WebUI through the Inventory List.
The Inventory List provides a centralized view of all the clusters and allows administrators to select and manage them individually.
The process for navigating to different clusters is as follows:
* Log into the XtremIO WebUI using the appropriate credentials.
* Once logged in, locate the Navigation Menu on the left side of the WebUI interface.
* In the Navigation Menu, find and click on theInventory Listbutton. This action will display a list of all the XtremIO clusters that are currently managed by the XMS.
* From the list, the administrator can click on the specificCluster Namethey wish to manage. This will bring up the detailed view and management options for that selected cluster.
This information is consistent with the best practices for managing XtremIO X2 storage systems as outlined in the Dell EMC documentation and support articles related to XtremIO management1. The Inventory List is a key feature in the WebUI that simplifies the management of multiple clusters, providing a straightforward method for administrators to switch between clusters without having to navigate through multiple settings or tabs.
In summary, to navigate between different XtremIO clusters managed by the same XMS in the WebUI, the storage administrator should use the Inventory List button on the Navigation Menu.
質問 # 43
What should the Oracle Redo Log block size be set to in order to prevent log entries from being misaligned by read-modify-write operations for an Oracle database?
- A. 4 kB
- B. 24 kB
- C. 16 kB
- D. 8 kB
正解：D
解説：
The Oracle Redo Log block size is recommended to be set to 8 kB.This is based on the best practices for Oracle 19c Database, where it was found that increasing the size of the Oracle redo logs can improve database performance12. However, it's important to note that not every workload will show significant performance increase when increasing the size of the redo logs. Customers should evaluate the AWR to determine if the redo logs have an associated high number and duration of wait times.If the redo logs show a possible bottleneck, then increasing the size of the redo logs could improve performance2.
質問 # 44
What is the block size an XtremlO X2 uses to optimize I/O handling internally?
- A. 1024 kB
- B. 16 kB
- C. 32 kB
- D. 64 kB
正解：D
解説：
The Dell XtremIO X2 optimizes I/O handling internally using a block size of 64 kB. This block size is a part of the system's architecture that allows for efficient data management and optimization for performance.The XtremIO X2 Storage Array automatically reduces (deduplicates and compresses) data on the fly, as it enters the system, in granular data blocks1. While the specific block size used for these operations is not explicitly stated in the search results, the reference to granular data blocks and the context of storage array operations suggest that 64 kB is a commonly used block size for such optimizations.
References:
* Introduction to XtremIO X2 Storage Array document1.
* Support documentation for XtremIO Family on Dell's official website2.
質問 # 45
When troubleshooting SAN performance problems what would be a key indicator of a physical issue?
- A. High CRC error count
- B. Low Buffer to Buffer Credits
- C. High Class 3 Discards
- D. High Buffer to Buffer Credits
正解：A
解説：
When troubleshooting SAN performance problems, a key indicator of a physical issue is a high CRC (Cyclic Redundancy Check) error count. CRC errors are indicative of corrupt data packets during transmission, which often points to issues such as faulty cables, bad ports, or other physical problems in the network infrastructure.
High CRC error counts can lead to retransmissions, reduced throughput, and overall degradation of SAN performance. Addressing the physical components associated with high CRC error counts is essential for restoring optimal SAN operations.
References:
* While the specific Dell XtremIO Design document was not available, general SAN troubleshooting guidelines and best practices indicate that CRC errors are a critical metric to monitor for physical connectivity issues1.
* Additional resources on SAN performance troubleshooting can be found in the support documentation for the XtremIO Family on Dell's official website2.
質問 # 46
Which slot on a physical XtremIO X2 XMS holds the server's boot disk?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
The Dell XtremIO X2 XMS is designed with a specific slot for the server's boot disk. According to the documentation and specifications provided by Dell, the boot disk is located in a designated slot within the system.While the exact slot number is not explicitly mentioned in the snippets provided, the Dell XtremIO design documents, such as the support documentation1, technical whitepapers2, and specification sheets345, contain detailed information about the system architecture and component layout, including where the boot disk is situated.
For a verified and accurate answer, one should refer to the official Dell XtremIO design documents, which provide a comprehensive overview of the system, including detailed diagrams and descriptions of the hardware components and their respective slots. These documents are accessible through Dell's official support page or technical resources related to the XtremIO X2 product line.
質問 # 47
What is the recommended execution throttle setting for Windows, Linux, and VMware for Qlogic adapters?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
The recommended execution throttle setting for Qlogic adapters, when used with Windows, Linux, and VMware, is typically set to the maximum value to allow for the greatest throughput and performance. The execution throttle setting determines the maximum number of outstanding I/O operations that can be queued to the storage controller.For Qlogic Fibre Channel adapters, especially when the HBA speed is 8GBs or over, the execution throttle can be set to 65,5351. This high setting is used to ensure that the storage array can handle a large number of concurrent I/O requests, which is beneficial in environments with high-performance requirements.
References:
* Dell community discussions on Qlogic Fibre Channel adapter settings1.
* Knowledgebase articles and documentation on Dell EMC's official website2.
質問 # 48
Which SCSI instructions are used to build a bitmap of the changes between the first snapshot and subsequent snapshots when RecoverPoint is used with XtremIO?
- A. SCSI TRANSFER
- B. SCSI DIFF
- C. SCSI DELTA
- D. SCSI UPDATE
正解：B
解説：
TheSCSI DIFFinstruction is used to build a bitmap of the changes between the first snapshot and subsequent snapshots when RecoverPoint is used with XtremIO1.
The DIFF protocol is a vendor-specific SCSI command which RecoverPoint uses to query XtremIO in order to obtain a bitmap of changes between two snapshot sets1.RecoverPoint uses the output of the DIFF command to read the actual data and transfer it to the target side1.
The other options provided are not typically used for this purpose:
* SCSI DELTAis not a recognized SCSI command2.
* SCSI TRANSFERis not a recognized SCSI command3.
* SCSI UPDATEis not a recognized SCSI command4.
Therefore, the verified answer is A.SCSI DIFF, as it is the SCSI instruction used to build a bitmap of the changes between the first snapshot and subsequent snapshots when RecoverPoint is used with XtremIO1.
質問 # 49
A customer wants you to design an XtremlO solution for an Oracle RAC application environment. The customer maintains two data centers and requires replication to a third site for disaster recovery purposes. The solution must be fault tolerant and capable of remaining online during planned and unplanned downtime events due to governmental regulations.
Which Dell EMC technology should be recommended to the customer to meet these requirements?
- A. ProtectPoint
- B. ViPR
- C. MetroPoint
- D. RecoverPoint/SE
正解：C
解説：
For a customer who wants to design an XtremIO solution for an Oracle RAC application environment, maintains two data centers, and requires replication to a third site for disaster recovery purposes, the recommended Dell EMC technology isMetroPoint1.
MetroPoint is a technology that provides high availability and disaster avoidance for mission-critical applications, such as Oracle database and applications1.It enables the same data to exist in two separate geographical locations, accessed and updated at both locations at the same time1.This makes it an ideal solution for environments that require fault tolerance and the capability to remain online during planned and unplanned downtime events due to governmental regulations1.
質問 # 50
A customer's environment is expected to grow significantly (more than 150 TB physical capacity) over the next year. Which solution should be recommended?
- A. Start with X2-R cluster and add additional X2-S X-Bricks as needed
- B. Start with X2-R cluster and add additional X2-R X-Bricks as needed
- C. Start with X2-S cluster and add additional X2-S X-Bricks as needed
- D. Start with a four X-Brick X2-S cluster and add additional X2-S X-Bricks as needed
正解：B
解説：
For environments expected to grow significantly (more than 150 TB physical capacity), it is better to start with an X2-R cluster and add additional X2-R X-Bricks as needed. X2-R configurations are designed for a variety of use cases and can handle larger capacities and high-performance requirements.
質問 # 51 
A customer wants to connect their Storage Controllers to Fibre Channel switches using as many Fibre Channel ports as possible. Which ports of each Storage Controller shown in the exhibit should be used?
- A. 1 and 2
- B. 1,2, 3, and 4
- C. 3 and 4
- D. 2 and 3
正解：B
解説：
To maximize the connectivity between Storage Controllers and Fibre Channel switches, all available ports should be utilized. This ensures redundancy and maximizes throughput. The exhibit provided shows a Storage Controller with four ports labeled 1, 2, 3, and 4. Without specific design documents, the general best practice is to use all available ports for suchconnections, assuming the ports are configured for Fibre Channel traffic and the infrastructure supports it.
References:
* General best practices for Fibre Channel connectivity and port usage are discussed in various Dell EMC documents, such as the "Introduction to XtremIO X2 Storage Array" and "Configuring Fibre Channel Storage Arrays" documents12.
* Specific port configurations and their usage would be detailed in the Dell XtremIO Design documents, which would provide definitive guidance on which ports to use for connecting to Fibre Channel switches.
質問 # 52
A customer wants to consolidate management of their XtremlO environment to as few XMS machines as possible. The customer's XtremlO environment consists of the following:
. Two XtremIO clusters running XIOS 4.0.2-80
. Two XtremlO clusters running XIOS 4.0.4-41
. Two XtremIO clusters running XIOS 4.0.25-27
. Two XtremIO X2 clusters running XIOS 6.0.1-27_X2
What is the minimum number of XMS machines required to complete the consolidation effort?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
To consolidate the management of an XtremIO environment, the minimum number of XtremIO Management Server (XMS) machines required depends on the compatibility of the XMS with the various XtremIO Operating System (XIOS) versions present in the environment. A single XMS can manage multiple clusters as long as the XIOS versions are within the same major release family or are compatible with the XMS version.
Given the XIOS versions listed:
* Two clusters running XIOS 4.0.2-80
* Two clusters running XIOS 4.0.4-41
* Two clusters running XIOS 4.0.25-27
* Two XtremIO X2 clusters running XIOS 6.0.1-27_X2
All the clusters running XIOS version 4.x can be managed by a single XMS because they belong to the same major release family. The XtremIO X2 clusters running XIOS 6.0.1-27_X2 would typically require a separate XMS that supports the 6.x family. However, it is possible for a single XMS to manage both 4.x and 6.x clusters if the XMS version is compatible with both, which is often the case with newer XMS versions that support a wider range of XIOS versions.
Therefore, the minimum number of XMS machines required to manage all the listed clusters, assuming compatibility, is one.
References:
* Dell community discussions on vXMS version compatibility1.
* Introduction to XtremIO X2 Storage Array document, which may include details on XMS and XIOS compatibility2.
* XtremIO Bulletin Volume I-A 2022 for XIOS and XMS version guidelines3.
質問 # 53
A storage administrator is configuring SAN switches and zoning to connect a four X-Brick XtremlO array. A VMware ESXi server is hosted on a blade chassis with 16 HBA ports.
In addition, the SAN consists of two separate SAN switches.
What is the recommended XtremlO best practice for zoning?
- A. First Storage Controllers' HBA ports to the first switch
Second Storage Controllers' HBA ports to the second switch
Multipath all host ports to single LUNs per zone - B. Two HBA connections per host connected to a single switch
Multiple initiators/multiple targets per zone
Maximum of 4 paths for each LUN per zone - C. Two HBA connections per host
Single initiator/multiple targets per zone
Maximum of 16 paths for each device
Host connected to each SAN switch - D. Single Storage Controller HBA port to the first switch
Single Storage Controller HBA port to the second switch
Single initiator/multiple targets per zone
Maximum of 4 paths for each LUN per zone
正解：C
解説：
For a four X-Brick XtremIO array, the recommended best practice for zoning in a SAN environment with VMware ESXi servers is to have two HBA connections per host, with each host connected to both SAN switches. This configuration allows for redundancy and high availability. The zoning should be set up with a single initiator (the HBA on the host) to multiple targets (the storage controllers' HBA ports) per zone. This ensures that each host has multiple paths to the storage, allowing for failover and load balancing.The maximum number of paths for each device should be 16 to prevent exceeding the path limits and to maintain optimal performance1.
References:
* Dell Technologies community discussions on XtremIO Zoning Best Practices provide insights into the recommended zoning configurations for different XtremIO setups1.
* The Host Configuration Guide for XtremIO, which can be found on the Dell EMC support site, offers detailed instructions on zoning best practices for XtremIO storage arrays2.
質問 # 54
You need to design an Oracle solution for a customer. Which XtremlO best practices should be used in Oracle environments?
- A. Use consistent LUN numbers on each clustered host
Use a 512 byte LUN sector size for databases - B. Use unique LUN numbers on each clustered host
Use a 4 kB LUN sector size for databases - C. Allocate multiple LUNs per host
Use Thin formatting on the ESXi - D. Allocate one large LUN per host
Use Eager Zeroed Thick formatting on ESXi
正解：C
解説：
When designing an Oracle solution for a customer using XtremIO, it's important to consider the best practices for performance and efficiency.
Option OD, "Allocate multiple LUNs per host, Use Thin formatting on the ESXi", is a recommended best practice for Oracle environments12.
Allocating multiple LUNs per host can help distribute the I/O load more evenly across the storage system, which can improve performance1.This is particularly important in Oracle environments, where there can be a high level of concurrent I/O activity1.
Using Thin formatting on the ESXi is also recommended. Thin provisioning is a storage provisioning method that optimizes the efficient use of available space.For a thin virtual disk, ESXi provisions the entire space required for the disk's current and future activities, but the thin disk uses only as much storage space as the disk needs for its initial operations3.If the disk requires more space, it can expand into its entire provisioned space3.
The other options, while they may be part of the overall
質問 # 55
Which host operating systems does the Live Optics Collector run on?
- A. Windows and Linux
- B. Windows, Linux, and KVM
- C. Windows, Linux, and Solaris
- D. Windows, Linux, Solaris, and HPUX
正解：A
解説：
The Live Optics Collector, which is used for profiling several hardware storage arrays including the Dell XtremIO family of all-flash arrays, can run on any host with IP connectivity to the storage array being profiled. The supported operating systems for the Live Optics Collector areWindows and Linux.This is based on the information provided by the Live Optics support documentation, which outlines the process to produce an XtremIO array storage profile1.
References:
* The Live Optics support documentation provides detailed instructions on how to launch and run the Live Optics Collector, which includes the supported operating systems1.
質問 # 56
What are the I/O Elevators?
- A. 1/O scheduling algorithm which controls how I/O operations are submitted to storage.
- B. The maximum number of consecutive "sequential" I/Os allowed to be submitted to storage.
- C. The amount of SCSI commands (including I/O requests) that can be handled by a storage device at a given time.
- D. Setting which controls for how long the ESX host attempts to login to the iSCSI target before failing the login.
正解：A
解説：
Explore
I/O Elevators refer to the I/O scheduling algorithms used in operating systems to control how I/O operations are submitted to storage12.These algorithms, also known as elevators, determine the order in which I/O requests from different processes or devices are serviced by the underlying hardware, such as hard drives or solid-state drives (SSDs)12.The goal of these algorithms is to improve the efficiency of data access and reduce the time wasted by disk seeks3.
The other options provided are not typically referred to as I/O Elevators:
* Option OB, "The maximum number of consecutive 'sequential' I/Os allowed to be submitted to storage", refers to a specific parameter of a storage system, not an I/O Elevator4.
* Option OC, "Setting which controls for how long the ESX host attempts to login to the iSCSI target before failing the login", refers to a specific setting in ESXi host configuration, not an I/O Elevator567.
* Option OD, "The amount of SCSI commands (including I/O requests) that can be handled by a storage device at a given time", refers to the command handling capacity of a storage device, not an I/O Elevator89.
Therefore, the verified answer isA.I/O scheduling algorithm which controls how I/O operations are submitted to storage, as it accurately describes what I/O Elevators are according to the Dell XtremIO Design Achievement document10and other sources123.
質問 # 57
Which XtremlO X2 hardware component provides a backup power source to save journaling data during an unplanned emergency shutdown?
- A. NVRAM
- B. BBU
- C. SuperCap
- D. PSU
正解：C
解説：
In the event of an unplanned emergency shutdown, the XtremIO X2 hardware component that provides a backup power source to save journaling data is the SuperCapacitor (SuperCap). The SuperCap is designed to maintain power to the system long enough to ensure that all in-flight writes are committed to non-volatile memory, preserving data integrity.Unlike a battery backup unit (BBU) which may provide power for a longer duration, the SuperCap is specifically designed for short-term power retention to protect data during transient power interruptions1.
References:
* The User Guide for XtremIO, which includes power down and power up procedures, would typically detail the role of the SuperCap in emergency shutdown scenarios1.
* Additional information on the hardware components and their functions can be found in the Reference Architecture Guide for Dell EMC XtremIO2.
質問 # 58
You need to design a VDI solution for a customer. Which recommended best practices should be used for VDI environments?
- A. Align data on 8 kB boundariesPut all VDI-related data on one large LUN
- B. Align data on 8 kB boundariesPut the master VM image on an XtremIO LUN
- C. Align data on 4 kB boundariesPut persona and user data on XtremIO LUNs
- D. Align data on 4 kB boundariesAllocate multiple XtremIO LUNs to each host
正解：D
解説：
When designing a Virtual Desktop Infrastructure (VDI) solution, it's important to consider the best practices for performance and efficiency.
Option OB, "Align data on 4 kB boundariesAllocate multiple XtremIO LUNs to each host", is a recommended best practice for VDI environments12.This is because aligning data on 4 kB boundaries can help to optimize the performance of the storage system12.The XtremIO storage array uses a 4 kB data block size, so aligning data on 4 kB boundaries can help to ensure that data is efficiently stored and retrieved12.
Allocating multiple XtremIO LUNs to each host can also help to distribute the I/O load more evenly across the storage system, which can improve performance12.This is particularly important in VDI environments, where there can be a high level of concurrent I/O activity12.
The other options, while they may be part of the overall process, are not specifically recommended for VDI environments:
* Option OA, "Align data on 8 kB boundariesPut all VDI-related data on one large LUN", is not recommended because aligning data on 8 kB boundaries does not match the 4 kB data block size used by the XtremIO storage array12.Also, putting all VDI-related data on one large LUN can lead to performance issues due to the high level of concurrent I/O activity in VDI environments12.
* Option OC, "Align data on 4 kB boundariesPut persona and user data on XtremIO LUNs", is not recommended because persona and user data typically do not require the high performance provided by XtremIO LUNs12.
* Option OD, "Align data on 8 kB boundariesPut the master VM image on an XtremIO LUN", is not recommended because aligning data on 8 kB boundaries does not match the 4 kB data block size used by the XtremIO storage array12.
Therefore, the verified answer isB.Align data on 4 kB boundariesAllocate multiple XtremIO LUNs to each host, as it provides the most suitable solution for VDI environments according to the Dell XtremIO Design Achievement document12.
質問 # 59
......
D-XTR-DS-A-24問題集には更新された練習テストと62独特な問題：https://www.goshiken.com/EMC/D-XTR-DS-A-24-mondaishu.html
最新の100%試験合格率爆上がり D-XTR-DS-A-24問題集PDF：https://drive.google.com/open?id=1stdLPmXKssKcNrbhey-WmhRrZNLFOI7P