売れ筋トップクラスのHPE0-S60最新試験問題2023年最新のHP試験練習
HPE Technical問題集でHPE0-S60試験は完全版問題で試験学習ガイド
HP HPE0-S60（Delta - HPE Compute Solutions）認定試験は、すでにHPE ATP - Server Solutions V3またはHPE ATP - Server Solutions V4認定を取得したITプロフェッショナルを対象としています。この試験は、HPE ProLiant Gen10、HPE SimpliVity、HPE Synergy、およびHPE OneViewを含む最新のHPEコンピュートソリューションに関する知識を試験することを目的としています。この試験に合格することは、HPEコンピュートソリューションの専門知識を示し、キャリアを進めたいITプロフェッショナルにとって不可欠です。この認定はグローバルに認められ、HPEコンピュートソリューションに精通したITプロフェッショナルを求める組織にとって高く評価されています。
質問 # 47
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
正解：
解説：
1 - Create a logical interconnect group with uplink sets.
2 - Create a logical enciosure.
3 - Create an enciosure group.
4 - Create server profile templates and server profiles.
5 - Define all required networks.
質問 # 48
Which statement about HPE Superdome Flex 280 is true?
- A. It must be equipped with at least 768 GB of memory.
- B. It can support up to two nPars with an external RMC.
- C. it cannot be managed using HPE OneView.
- D. It supports 2 to 8 sockets in 2-socket increments.
正解：A
質問 # 49
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
正解：
解説：
質問 # 50
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
正解：
解説：
質問 # 51
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- B. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- C. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
正解：C
質問 # 52
Which statement about an HPE Oneview support dump is true?
- A. Support dump is a binary file that can be opened only in a dedicated application
- B. Preview support dump is available only when creating an appliance support dump
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
正解：A
質問 # 53
Match each HPE OneView network type with its definition.
正解：
解説：
質問 # 54
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To use all compute nodes, the customer must create at least two logical enclosures
- B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- C. The customer can add one D3940 storage Module to each of the frames
- D. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
正解：D
質問 # 55
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
正解：
解説：
質問 # 56
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- B. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
正解：C
質問 # 57
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Update Readiness Checker
- B. HPE Composer Maintenance Console
- C. HPE OneView Global Dashboard
- D. HPE OneView Firmware Compliance Report
正解：B
質問 # 58
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. HPE OneView offers limited support tor HPE Primera because of the firmware differences
- B. Management procedures and features are the same tor both types of the array
- C. HPE OneView offers additional functionalities for HPE Primera like CPG management
- D. To manage HPE Primera using HPE OneView. a dedicated license is required
正解：C
質問 # 59
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
正解：
解説：
質問 # 60
Match each HPE OneView network type with its definition.
正解：
解説：
質問 # 61
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using array management tools
- B. Install and configure MPIO on me Windows system
- C. Disable deduplication for this volume at the array level
- D. Remove the offline disks using Windows Disk Management
正解：B
質問 # 62
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. Storage Container
- C. App Volume Set
- D. Virtual Volume Set
正解：D
質問 # 63
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- D. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
正解：D
質問 # 64
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. LLDP tagging
- B. Storm control
- C. Pause flood protection
- D. Loop protection
正解：B
質問 # 65
Match HPE Superdome Flex system with its specific feature.
正解：
解説：
質問 # 66
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there Is a logical interconnect created based on the 12Gb SAS switches.
- B. If the D3940 storage module is property licensed through HPE OneView interface.
- C. If the D3940 module is imported in managed state that allows volume provisioning.
- D. If there is at least one ISCSI network configured that will provide access to the module.
正解：C
質問 # 67
Which statement about the HPE D3940 storage module is true?
- A. it is configured through CLl available from HPE Synergy console
- B. SATA drives requires redundant 10 adapters to be installed in this module
- C. Up to five modules can be installed in a single frame with Gen10 servers
- D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
正解：A
質問 # 68
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both master modules are located in the same HPE S ynergy frame
- B. The master modules are located in the interconnect bays 2 and 5
- C. For the given downlink speed, the maximum number of frames is reached
- D. To use interconnect bay set 3, all compute nodes must be half-height
正解：A
質問 # 69
......
HP HPE0-S60: Delta - HPE Compute Solutions試験は、HPEコンピュートソリューションの展開におけるITプロフェッショナルの専門知識を認定する業界で認められた資格です。この試験は、HPEコンピュートソリューションの複雑な問題を解決し、HPEテクノロジーの効率的な展開と管理を提供する能力を証明したい個人を対象としています。
HPE0-S60試験は、HPE ProLiant、Synergy、Apollo、およびBladeSystemサーバーを含む幅広いトピックをカバーしています。また、HPE OneView、HPE Integrated Lights-Out（iLO）、およびHPE Insight Controlもカバーしています。この試験は、HPEコンピュートソリューションの理解とそれらのソリューションを実装およびトラブルシューティングする能力をテストするために設計されています。
最善な方法で問題集を使おう！練習テストならこれHP HPE0-S60：https://www.goshiken.com/HP/HPE0-S60-mondaishu.html
HPE0-S60問題集を無料提供しております！試験問題と解答：https://drive.google.com/open?id=1ZcZ4afZuHINDJGHodytWQvxm3eZMJIbH