HPE0-S60 PDF問題集リアル2023最近更新された問題
リリースHP HPE0-S60更新された問題PDF
質問 # 17
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
正解：
解説：
質問 # 18
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
正解：
解説：
質問 # 19
Which statement about an HPE Oneview support dump is true?
- A. Support dump is a binary file that can be opened only in a dedicated application
- B. Preview support dump is available only when creating an appliance support dump
- C. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- D. Appliance support dump by default contains a logical enclosure support dump
正解：A
質問 # 20
Match each HPE OneView network type with its definition.
正解：
解説：
質問 # 21
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- D. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
正解：A
質問 # 22
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- C. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- D. Enable FC primary and secondary boot on the modules through the HPE OneView interface
正解：A
質問 # 23
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?
- A. Copy the server profile and assign the clone to the new hardware
- B. Edit the server profile and change server hardware type
- C. Create a new server profile template and apply to the new hardware
- D. Migrate the application to a Logical JBOD and connect it to the new server
正解：B
質問 # 24
Which compute node parameters are captured within server hardware type?
- A. Size of the memory Installed
- B. Number of the CPUs
- C. installed operating system
- D. Mezzanine card configuration
正解：C
質問 # 25
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Move one of the master modules to the appropriate interconnect bay in the second frame.
- B. Create a new logical enclosure based on both HPE Synergy frames.
- C. Re-parent an existing enclosure group to the new logical interconnect group.
- D. Create a new logical interconnect group and enclosure group for two frames setup
- E. Modify an existing logical interconnect to include second HPE Synergy frame.
正解：B、E
質問 # 26
Which statement about login redistribution is true?
- A. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- C. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- D. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
正解：D
質問 # 27
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?
- A. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked
- B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
- C. A license for an extended logical enclosure must be added to HPE OneView through GUI
- D. Four compute modules must be moved to the second frame to balance the configuration
正解：A
質問 # 28
Click the area within the iLO management interface that will allow you to access workload Advisor.
正解：
解説：
質問 # 29
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. HPE OneView method for I/O firmware update procedure
- B. HPE OneView IT HPE Persistent Memory firmware must be updated.
- C. HPE SUM if HPE Persistent Memory firmware must be updated
- D. RMC CLI to update I/O and HPE Persistent Memory firmware
正解：D
質問 # 30
Match HPE Superdome Flex system with its specific feature.
正解：
解説：
質問 # 31
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. Replication setup
- B. Volume provisioning
- C. CPG management
- D. Cache management
正解：B
質問 # 32
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. HPE OneView offers additional functionalities for HPE Primera like CPG management
- B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
- C. To manage HPE Primera using HPE OneView. a dedicated license is required
- D. Management procedures and features are the same tor both types of the array
正解：A
質問 # 33
Match HPE SimpliVity term with the definition.
正解：
解説：
質問 # 34
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
- B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- C. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- D. For VC-FC modules, all of server facing ports must be property licensed.
正解：C
質問 # 35
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
正解：
解説：
質問 # 36
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Pause flood protection
- B. Port flap protection
- C. Storm control
- D. sFlow
正解：D
質問 # 37
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE Composer Maintenance Console
- B. HPE OneView Global Dashboard
- C. HPE OneView Firmware Compliance Report
- D. HPE OneView Update Readiness Checker
正解：A
質問 # 38
......
HPE0-S60問題集と練習テスト（82試験問題)：https://www.goshiken.com/HP/HPE0-S60-mondaishu.html
ガイド（2023年最新）実際のHP HPE0-S60試験問題：https://drive.google.com/open?id=1txoQM8eyx0ixwlCMLcPVNZnNLnHbLmVa