最新版無料体験を掴み取れ！HP HPE0-S60問題集PDFは更新されたのは2024年
最新リリースのHPE0-S60問題集はHPE Technical認証済みです
HPE0 -S60（Delta -HPE Compute Solutions）認定試験は、HPE ATP -Server Solutions V3またはHPE ATP -Server Solutions V4認定をすでに達成しているIT専門家向けに設計されています。この試験では、HPE Proliant Gen10テクノロジーに基づいて、HPEコンピューティングソリューションの設計、展開、管理、トラブルシューティングに必要な知識とスキルを測定します。
質問 # 39
Which statement about HPE Superdome nPars is true?
- A. Chassis in the same nPar can have different memory configuration
- B. Chassis in the same nPar can have different CPU configuration
- C. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- D. Rack Management Controller is required Tor nPar configuration
正解：D
質問 # 40
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
正解：
解説：
Explanation:
The QSFP+ ports (Q1 and Q2) on the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy can be used to connect satellite modules. These ports are designed to handle high-speed connectivity required for linking additional frames and expanding the Synergy infrastructure.
質問 # 41
Match each HPE Synergy logical component with the definition.
正解：
解説：
質問 # 42
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- C. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
- D. For VC-FC modules, all of server facing ports must be property licensed.
正解：A
質問 # 43
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. HPE OneView offers additional functionalities for HPE Primera like CPG management
- B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
- C. To manage HPE Primera using HPE OneView. a dedicated license is required
- D. Management procedures and features are the same tor both types of the array
正解：D
解説：
When managing HPE Primera arrays using HPE OneView, the management procedures and features are largely the same as those for HPE 3PAR arrays. HPE OneView provides a consistent management experience across both storage platforms, allowing customers to easily transition from HPE 3PAR to HPE Primera without significant changes to their management workflows.
質問 # 44
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments are licensed per node not per physical socket
- B. All new HPE SimpliVity models support deduplication and compression
- C. All new HPE SimpliVity models are based on AMD CPUs
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
正解：B
解説：
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.
質問 # 45
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both modules are located in different frames for redundancy
- B. For an uplink set, ports from different modules can be selected
- C. interconnect modules are installed in interconnect bays 1 and 4
- D. An additional license is required to change the enclosure count
正解：D
質問 # 46
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- C. All logical interconnects configured using this logical interconnect group will be automatically updated
- D. All logical interconnects configured using this logical Interconnect group will report inconsistency
正解：D
解説：
When a logical interconnect group (LIG) that is used to configure logical interconnects in multiple logical enclosures is modified, all logical interconnects configured using this LIG will report inconsistency. This is because the configuration of the logical interconnects will no longer match the new settings defined in the modified LIG, and the inconsistencies must be resolved to ensure the configurations are synchronized.
質問 # 47
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
正解：
解説：
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan:Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server:Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image:Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface:Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
質問 # 48
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Storm control
- B. LLDP tagging
- C. Pause flood protection
- D. Loop protection
正解：A
解説：
Storm control is a feature in HPE Virtual Connect that allows administrators to suppress excessive inbound multicast, broadcast, and destination lookup failure (DLF) packets. This feature helps to mitigate the negative impact of network storms, which can degrade network performance and availability. By configuring storm control, administrators can set thresholds to limit the rate of such packets entering the network, ensuring a stable and reliable network environment.
質問 # 49
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
正解：D
質問 # 50
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- B. The customer can add a new logical enclosure to an existing setup once all required licenses are addedtoHPE OneView and associated with the new frames.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
正解：A
解説：
HPE Synergy management rings have a maximum capacity for the number of frames they can manage. With
18 frames already managed in 6 logical enclosures, adding 5 more frames would exceed this capacity.
Therefore, the customer needs to create a new management ring for the new logical enclosure to ensure proper management and operation.
質問 # 51
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
正解：
解説：
質問 # 52
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed Which tool should you use to troubleshoot the problem?
- A. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
- B. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
- C. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.
- D. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
正解：B
質問 # 53
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
正解：
解説：
1 - Create a logical interconnect group with uplink sets.
2 - Create a logical enciosure.
3 - Create an enciosure group.
4 - Create server profile templates and server profiles.
5 - Define all required networks.
質問 # 54
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Disable deduplication for this volume at the array level
- B. Remove the offline disks using array management tools
- C. Remove the offline disks using Windows Disk Management
- D. Install and configure MPIO on me Windows system
正解：D
解説：
The issue of seeing multiple instances of an FC boot volume in Disk Management, with one online and three offline, is typically caused by the lack of Multi-Path I/O (MPIO) configuration. Installing and configuring MPIO on the Windows system will enable the operating system to recognize multiple paths to the same storage volume and manage them correctly, presenting only one online instance of the volume.
質問 # 55
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. Both master modules are located in the same HPE S ynergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
正解：C
質問 # 56
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?
- A. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
- B. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
- C. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
- D. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
正解：C
解説：
HPE Composer 2 offers enhanced scalability compared to HPE Composer 1. While HPE Composer 1 and HPE OneView support up to 21 frames, HPE Composer 2 extends this limit, allowing for greater scalability and more efficient management of larger HPE Synergy environments. This makes HPE Composer 2 a suitable recommendation for customers needing to manage more than 21 frames.
質問 # 57
Which statement about manual orchestration during the firmware update is true?
- A. It provides the ability to install an older firmware version than currently Installed In the interconnect
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It is supported only for logical enclosures with at least three frames
- D. It provides an ability to select and update one side of the Interconnect topology at a time
正解：D
解説：
Manual orchestration during a firmware update allows administrators to control the update process more precisely. Specifically, it enables the selection and update of one side of the interconnect topology at a time.
This capability is particularly useful in maintaining network availabilityand minimizing downtime during the update process, as one side can be updated and verified before proceeding to the other side.
質問 # 58
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?
- A. A license for an extended logical enclosure must be added to HPE OneView through GUI
- B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
- C. Four compute modules must be moved to the second frame to balance the configuration
- D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked
正解：D
解説：
When adding a new HPE Synergy frame to an existing logical enclosure, it is essential to stack the HPE Synergy Virtual Connect SE 32Gb FC Modules from both frames. Stacking these modules ensures consistent management and redundancy across the logical enclosure, providing seamless integration and optimal performance.
質問 # 59
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- B. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- C. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
正解：C
解説：
The VMware vSphere Standard license does not include support for advanced features like Distributed Resource Scheduler (DRS) and Distributed Switches. These features are available onlywith the vSphere Enterprise Plus license. Therefore, to meet the customer's requirement of using Distributed Switches and a DRS cluster, the proposal should include vSphere Enterprise Plus licenses instead of Standard licenses.
質問 # 60
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
- C. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
- D. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
正解：B
解説：
For HPE Virtual Connect Fibre Channel (VC FC) modules, utilization sampling is always enabled by default and cannot be disabled. This feature ensures continuous monitoring of the module's performance and utilization, providing valuable insights for managing the Fibre Channel network.
質問 # 61
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if both FiexNICs are configured with the same speed
- B. if the logical enclosure is configured with redundant master modules
- C. if both FiexNICs are connected to different networks
- D. If the logical enclosure is built on at least three HPE Synergy frames
正解：A
質問 # 62
......
最新のHPE0-S60試験問題集でHP試験問題にトレーニング：https://www.goshiken.com/HP/HPE0-S60-mondaishu.html
更新された検証済みのHPE0-S60問題集と解答で100%合格させる：https://drive.google.com/open?id=1ZcZ4afZuHINDJGHodytWQvxm3eZMJIbH