最新 [2023年11月16日]HPE0-S59試験正確解答HPE Compute SolutionsのPDF問題
あなたのキャリアーを稼いで飛躍せよHP 60問題
質問 # 36
Which statement about manual orchestration during the firmware update is true?
- A. It provides an ability to select and update one side of the Interconnect topology at a time
- B. It provides the ability to install an older firmware version than currently Installed In the interconnect
- C. It allows all the interconnect modules to be activated manually at the same time.
- D. It is supported only for logical enclosures with at least three frames
正解：A
質問 # 37
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- B. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- C. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- D. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
正解：C
質問 # 38
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
正解：
解説：
質問 # 39
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Create a new logical enclosure based on both HPE Synergy frames.
- B. Create a new logical interconnect group and enclosure group for two frames setup
- C. Modify an existing logical interconnect to include second HPE Synergy frame.
- D. Move one of the master modules to the appropriate interconnect bay in the second frame.
- E. Re-parent an existing enclosure group to the new logical interconnect group.
正解：A、C
質問 # 40
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- B. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
正解：C
質問 # 41
Click the area within the iLO management interface that will allow you to access workload Advisor.
正解：
解説：
質問 # 42
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- D. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
正解：C
質問 # 43
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- B. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- C. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- D. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- F. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
正解：A、D
質問 # 44
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- C. This logical JBOD can be presented to the compute nodes in a different frame.
- D. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
正解：B
質問 # 45
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It cannot be mixed with Gen9 compute modules in the same frame.
- B. It only supports NVDIMM Persistent Memory.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
正解：B
質問 # 46
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- D. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
正解：A
質問 # 47
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both master modules are located in the same HPE S ynergy frame
- B. For the given downlink speed, the maximum number of frames is reached
- C. The master modules are located in the interconnect bays 2 and 5
- D. To use interconnect bay set 3, all compute nodes must be half-height
正解：A
質問 # 48
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant DL580 Gen10
- B. HPE Synergy 480 Gen10 Plus
- C. HPE Superdome Flex system
- D. HPE ProLiant OL380 Gen 10 Plus
正解：B
質問 # 49
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
正解：
解説：
質問 # 50
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
正解：A
質問 # 51
Match each HPE OneView network type with its definition.
正解：
解説：
質問 # 52
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- B. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
正解：A
質問 # 53
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- C. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- D. Enable FC primary and secondary boot on the modules through the HPE OneView interface
正解：C
質問 # 54
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
- B. It can support a single processor only and up to 4 per chassis
- C. It is fully managed using HPE OneView including all connections
- D. It is equipped with HPE Persistent memory by default
正解：B
質問 # 55
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All logical interconnects configured using this logical Interconnect group will report inconsistency
- C. All logical interconnects configured using this logical interconnect group will be automatically updated
- D. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
正解：A
質問 # 56
Which statement about an HPE Oneview support dump is true?
- A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- B. Appliance support dump by default contains a logical enclosure support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Preview support dump is available only when creating an appliance support dump
正解：C
質問 # 57
......
正真正銘のベスト資料はHPE0-S59オンライン練習試験：https://www.goshiken.com/HP/HPE0-S59-mondaishu.html
練習できるHPE0-S59にはGoShiken画期的なあなたをHPE Compute Solutions試験合格させます合格率：https://drive.google.com/open?id=1-dBhRc2bQNgPdUCSf9opHHLXt0_HacJT