2024年最新のD-VXR-DY-01問題集レビュー専門クイズ学習材料
D-VXR-DY-01テスト準備トレーニング練習試験問題 練習テスト
質問 # 102
What is a consideration when using ToR switches with VxRail?
- A. All-Flash models must use 10 GbE or faster ports.
- B. VxRail iDRAC Management ports require 10 GbE ports.
- C. IPv6 Multicast must be disabled in this environment.
- D. Link aggregation must be enabled on VxRail switch ports.
正解：A
質問 # 103
What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?
正解：
解説：
質問 # 104
A VxRail deployment has just been completed, and the performance service is enabled. The vSAN backend IOPS metrics are not available for the cluster.
What is the reason for this issue?
- A. Health service has not been turned on
- B. Data has not been populated yet.
- C. Performance service has not been disabled and re-enabled
- D. Monitoring policy has not been created
正解：B
質問 # 105
When validating the VxRail health just after the VxRail initial configuration, there is a red exclamation mark on the MARVIN-Virtual-SAN-Cluster and the reported health alarm is 'Component metadata health'.
A "Retest" action in the health service panel is performed and all the nodes in the cluster show health status as failed with the invalid state. Investigation does not reveal any hardware issues with the disks in use by vSAN.
What action should be taken next?
- A. Evacuate and destroy the disk/disk group that contains the component(s) reporting errors and clear the alarm
- B. Apply the vSphere ESXi600-201611001 patch, then click the "Retest" button again
- C. Wait 24 hours, then click the "Retest" button again
- D. Reapply the MARVIN storage policy to the VxRail internal virtual machines
正解：B
質問 # 106
Which proactive vSAN tests are built in vCenter?
- A. Network performance and firewall port simulation
- B. VM creation and network performance
- C. Firewall port and data utilization simulation
- D. VM creation and data utilization simulation
正解：B
質問 # 107
A company has a two chassis G Series cluster and wants to change the setup. This will require a reset of the chassis.
What is the correct procedure?
- A. Reset the secondary chassis first, followed by the primary chassis, through the reset script.
- B. Reset the primary chassis first, followed by the secondary chassis, through the reset script.
- C. Reset both chassis simultaneously through the reset script
- D. Reset both chassis simultaneously with the mobile build server
正解：A
質問 # 108
A new enterprise customer will be deploying VxRail, utilizing an existing vCenter.
Which server will be used to add and validate the host and domain names?
- A. Internal DNS server deployed on node1
- B. Customer external DNS server
- C. Customer external vCenter with host file
- D. Internal DNS server on VxRail Manager
正解：B
質問 # 109
What categories can be validated by the VxRail NVT?
- A. ToR Switches, Upstream Switches, and VxRail Nodes
- B. Network Services, Upstream Switches, and VxRail Nodes
- C. Network Services, ToR Switches, and Upstream Switches
- D. Network Services, ToR Switches, and VxRail Nodes
正解：C
質問 # 110
What is a consideration when expanding a VxRail cluster? (Choose two.)
- A. G Series clusters can be expanded only with G Series nodes
- B. 1 GbE must be hybrid and single processor node type
- C. Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed
- D. Expanding a cluster to 64 nodes requires a 25 GbE network
正解：A、B
質問 # 111
Which series of VxRail nodes is designed to support a large MongoDB environment that is being used for data analytics?
- A. P Series
- B. G Series
- C. S Series
- D. V Series
正解：A
質問 # 112
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?
- A. Upgrade the internal vCenter Server to version 7.0
- B. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
- C. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
- D. Upgrade the VxRail version from 4.7.xxx to 7.0.000
正解：C
質問 # 113
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process.
Where in the vSphere Client can they review alarms and overall vSAN health?
- A. Triggered Alarms > All Issues > Issues and Alarms
Triggered Alarms > vSAN > Health - B. Triggered Alarms > Issues and Alarms > All issues
Triggered Alarams > vSAN > Skyline Health - C. Monitor > Issues and Alarms > All issues
Monitor > vSAN > Skyline Health - D. Monitor > All Issues > Issues and Alarms
Monitor > vSAN > Health
正解：C
質問 # 114
A customer is deploying a VxRail cluster in their datacenter and will be deploying other VxRail clusters in the coming months.
Which vCenter deployment option will be excluded from the VxRail Lifecycle software updates?
- A. Existing Customer-supplied vCenter Server
- B. Existing VxRail-managed vCenter Server
- C. Internal VxRail-managed vCenter Server
正解：A
質問 # 115
Which integrated backup solution is included with VxRail at no additional cost?
- A. Dell EMC NetWorker
- B. VMware VM Snapshots
- C. VMware vSphere Data Protection
- D. Dell EMC Data Protection Suite
正解：C
質問 # 116
An implementation engineer is deploying a VxRail cluster at a secure site that does not allow access to the external DNS server.
How should the VxRail be deployed?
- A. VxRail cannot be deployed in this environment
- B. With customer provided external vCenter and internal DNS
- C. With internal vCenter and internal DNS
- D. With internal vCenter and hostfiles for name resolution
正解：C
質問 # 117
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Marvin
- B. Election
- C. Loudmouth
- D. Mystic
正解：B
質問 # 118
After powering on Dell PowerEdge-based VxRail nodes, what defines the primary node of the cluster being configured?
- A. Marvin
- B. Loudmouth
- C. PTAgent
- D. Election Process
正解：B
質問 # 119
A customer requires a Stretched VxRail Cluster with S570 nodes in its minimal configuration.
Which setup will fulfill the requirement?
- A. 2+2 nodes
- B. 4+4 nodes
- C. 3+3 nodes
- D. 6+6 nodes
正解：C
質問 # 120
In a VxRail deployment with an external vCenter Server, which VMware component(s) is automatically licensed?
- A. vSAN only
- B. vCenter and vSAN only
- C. vCenter, vSAN, and vSphere
- D. vCenter and vSphere only
正解：A
質問 # 121
During deployment of a VxRail E560F cluster the data on the node becomes corrupted due to a misconfiguration.
Which option in the RASR menu should be selected to ensure the quickest restart of the installation?
- A. Install DUPs
- B. Factory Reset
- C. Create RASRUSB
- D. RASR Reset
正解：B
質問 # 122
Which vSAN setting is enabled by default during the initial deployment of a VxRail cluster?
- A. Performance Service
- B. Encryption
- C. Storage policy of FTT = 1
- D. Deduplication and Compression
正解：D
質問 # 123
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. G Series
- B. S Series
- C. P Series
- D. V Series
正解：D
質問 # 124
Which command is used to restart the Loudmouth process on an ESXi node?
- A. systemcti restart loudmouth
- B. /etc/int.d/loudmouth restart
- C. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
- D. systemcti restart vmware-loudmouth
正解：B
質問 # 125
What Is a supported method for racking nodes for a new VxRail deployment?
- A. With PDUs connected to 120v single phase 5-amp electrical circuits
- B. In the rack hosting the network equipment used to manage the iDRAC
- C. Starting with node 1 at the top of the rack
- D. With server exhaust facing the cold aisle
正解：C
質問 # 126
A company has gradually expanded their VxRail environment over a period of years. They now need to update all the VxRail systems to the same code level. However, the company is concerned about the cost.
How could the company benefit by using VxRail REST API in the upgrade?
- A. Report status of all running processes on a cluster or the status of a specific process
- B. Report system statistics, heartbeat, and available node information
- C. Enable automating of upgrade operations of one or more VxRail systems
- D. Create iDRAC logs, database logs, and downloads log extracts
正解：C
質問 # 127
......
試験問題解答ブレーン問題集でD-VXR-DY-01試験問題集PDF問題：https://www.goshiken.com/EMC/D-VXR-DY-01-mondaishu.html
D-VXR-DY-01試験問題集、D-VXR-DY-01練習テスト問題：https://drive.google.com/open?id=1YhQM98iQgNk8Er0lRZDMrlqlxFOlY991