[2023年更新]無料200-301試験問題集はパス試験は超簡単
200-301試験問題集で200-301練習テスト問題
Cisco 200-301試験に合格するためには、ネットワークアーキテクチャ、プロトコル、およびテクノロジーについて強い理解力が必要です。また、ルーターやスイッチなどのネットワークデバイスを設定、トラブルシューティング、およびメンテナンスできる能力も必要です。さらに、脅威、脆弱性、および緩和技術を含むネットワークセキュリティにも精通している必要があります。Cisco 200-301試験は、ネットワーク技術の分野でのキャリアアップと知識・スキルの向上を目指すネットワークのプロフェッショナルにとって必須の認定試験です。
質問 # 505
Which protocol is a Cisco proprietary implementation of STP?
- A. PVST+
- B. CST
- C. MSTP
- D. RSTP
正解：A
質問 # 506
Refer to the exhibit.
What is the effect of this configuration?
- A. The switch port interface trust state becomes untrusted
- B. Dynamic ARP inspection is disabled because the ARP ACL is missing
- C. The switch port remains administratively down until the interface is connected to another switch
- D. The switch port remains down until it is configured to trust or untrust incoming packets
正解：A
解説：
Explanation
Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network. It intercepts, logs, and discards ARP packets with invalid IP-to-MAC address bindings. This capability protects the network from certain man-in-the-middle attacks. After enabling DAI, all ports become untrusted ports.
質問 # 507
Refer to the exhibit.
An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
正解：
解説：
質問 # 508
A Cisco IP phone receives untagged data traffic from an attached PC.
Which action is taken by the phone?
- A. It tags the traffic with the native VLAN.
- B. It allows the traffic to pass through unchanged.
- C. It tags the traffic with the default VLAN.
- D. It drops the traffic.
正解：B
質問 # 509
Drag the IPv6 DNS record types from the left onto the description on the right.
正解：
解説：
Explanation
https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(
質問 # 510
Refer to the exhibit.
If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command how does the router respond?
- A. It immediately replaces the existing OSPF route in the routing table with the newly configured static route
- B. It starts sending traffic without a specific matching entry in the routing table to GigabitEthernet0/1
- C. It ignores the new static route until the existing OSPF default route is removed
- D. It starts load-balancing traffic between the two default routes
正解：C
解説：
Our new static default route has the Administrative Distance (AD) of 120, which is bigger than the AD of OSPF External route (O*E2) so it will not be pushed into the routing table until the current OSPF External route is removed. For your information, if you don't type the AD of 120 (using the command "ip route 0.0.0.0 0.0.0.0 10.13.0.1") then the new static default route would replace the OSPF default route as the default AD of static route is 1. You will see such line in the routing table: S* 0.0.0.0/0 [1/0] via 10.13.0.1
質問 # 511
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
正解：
解説：
質問 # 512
Refer to the exhibit.
If OSPF is running on this network, how does Router 2 handle traffic from Site B to 10.10.13/25 at Site A?
- A. It sends packets out of interface Fa0/2 only.
- B. It sends packets out of interface Fa0/1 only.
- C. It cannot send packets to 10.10.13 128/25
- D. It load-balances traffic out of Fa0/1 and Fa0/2
正解：C
解説：
Explanation
Router2 does not have an entry for the subnet 10.10.13.128/25. It only has an entry for 10.10.13.0/25, which ranges from 10.10.13.0 to 10.10.13.127.
質問 # 513
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
正解：
解説：
質問 # 514
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
正解：
解説：
質問 # 515
Drag and Drop Question
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
正解：
解説：
Explanation:
Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough ...
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan- controllers/106082-wlc-compatibility-matrix.html
質問 # 516
An engineer is configuring remote access to a router from IP subnet 10.139.58.0/28. The domain name, crypto keys, and SSH have been configured. Which configuration enables the traffic on the destination router?
- A.
- B.
- C.
- D.
正解：C
質問 # 517
Which command should you enter to configure a device as an NTP sever?
- A. ntp master
- B. ntp peer
- C. ntp authenticate
- D. ntp sever
正解：A
質問 # 518
Refer to the exhibit. Which type of configuration is represented in the output?
- A. Ansible
- B. JSON
- C. Chef
- D. Puppet
正解：D
質問 # 519
Refer to Exhibit.
The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router.
Which two static host routes must be configured on the NEW York router? (Choose two)
- A. ipv6 route 2000::1/128 2012::2
- B. ipv6 route 2000::3/128 2023::3
- C. ipv6 route 2000::1/128 s0/0/1
- D. ipv6 route 2000::3/128 s0/0/0
- E. ipv6 route 2000::1/128 2012::1
正解：B、E
質問 # 520
Refer to the exhibit.
The network administrator must establish a route by which London workstations can forward traffic to the Manchester workstations.
What is the simplest way to accomplish this?
- A. Configure a static default route on London with a next hop of 10.1.1.1.
- B. Configure Manchester to advertise a static default route to London.
- C. Configure a dynamic routing protocol on London to advertise all routes to Manchester.
- D. Configure a dynamic routing protocol on Manchester to advertise a default route to the London router.
- E. Configure a static route on London to direct all traffic destined for 172.16.0.0/22 to 10.1.1.2.
- F. Configure a dynamic routing protocol on London to advertise summarized routes to Manchester
正解：E
質問 # 521
Refer to the exhibit. An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC- 2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN.
Which configuration meets these requirements?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
正解：A
質問 # 522
Drag and drop the IPv6 address description from the left onto the IPv6 address types on the right. Not all options are used.
正解：
解説：
質問 # 523
Drag and Drop Question
Drag and drop the TCP/IP protocols from the left onto their primary transmission protocols on the right.
正解：
解説：
質問 # 524
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
正解：
解説：
質問 # 525
What are two benefits of controller-based networking compared to traditional networking? (Choose two)
- A. controller-based inflates software costs, while traditional decreases individual licensing costs
- B. Controller-based reduces network configuration complexity, while traditional increases the potential for errors
- C. controller-based allows for fewer network failure, while traditional increases failure rates.
- D. controller-based increases network bandwidth usage, while traditional lightens the load on the network.
- E. Controller-based provides centralization of key IT functions. While traditional requires distributes management function
正解：B、E
質問 # 526
What are two functions of a Layer 2 switch? (Choose two)
- A. moves packets within a VLAN
- B. acts as a central point for association and authentication servers
- C. moves packets between different VLANs
- D. makes forwarding decisions based on the MAC address of a packet
- E. selects the best route between networks on a WAN
正解：A、D
質問 # 527
Which two QoS tools provides congestion management? ( Choose two )
- A. PQ
- B. PBR
- C. FRTS
- D. CBWFQ
- E. CAR
正解：A、D
解説：
Type of queuing methods are available: * First-In-First-Out (FIFO) * Priority Queuing (PQ) * Custom Queuing (CQ) * Weighted Fair Queuing (WFQ) * Class-Based Weighted Fair Queuing (CBWFQ) * Low-Latency Queuing (LLQ)
https://www.orbit-computer-solutions.com/qos-congestion-management-tools/
質問 # 528 
Refer to the exhibit. How does router R1 handle traffic to 192.168.10.16?
- A. It selects the OSPF route because it has the lowest cost.
- B. It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.
- C. It selects the RIP route because it has the longest prefix inclusive of the destination address.
- D. It selects the EIGRP route because it has the lowest administrative distance.
正解：D
質問 # 529
......
Cisco 200-301認定試験は、認定ネットワークアソシエイトになりたい個人向けの世界的に認知された資格です。この認定試験は、ネットワークセキュリティ、ネットワークの基礎、自動化、プログラマビリティなど、さまざまな分野でのネットワークプロフェッショナルの知識とスキルを検証します。これは、最新の技術やネットワーキング業界のトレンドに関する候補者の専門知識をテストする包括的な試験です。
Cisco 200-301 認定試験は、以前の CCNA 試験を置き換える単一の試験です。新しい試験には、ネットワーキングの進化する風景を反映する更新されたコンテンツと技術が含まれています。この試験は120分の時間制限があり、100〜120問から構成されています。この試験は、任意の Pearson VUE テストセンターで受験でき、候補者はオンラインで試験をスケジュールできます。
200-301試験問題集で200-301練習テスト問題：https://www.goshiken.com/Cisco/200-301-mondaishu.html
無料200-301学習問題集ガイド試験問題解答はここ：https://drive.google.com/open?id=1DYeyRcRVijLq3LOGjJE9uFsWTgrU3p87