究極のガイドはNACE-CIP1-001最新2023年05月16日時間限定！今すぐダウンロード！
2023年最新のな厳密検証された合格させるNACE-CIP1-001試験にはリアル問題と解答
NACE-CIP1-001認定は、コーティングおよび腐食防止産業でキャリアを追求したい個人にとって重要な資格です。世界中の雇用主や顧客に認知され、個人のプロフェッショナリズムと継続的な学習への取り組みを証明します。この認定を取得することで、個人はキャリアを進め、主任検査官やプロジェクトマネージャーなど、業界でより難易度の高い役割を担うことができます。全体的に、NACE-CIP1-001認定試験は、コーティングおよび腐食防止産業において知識と技能に優れたプロフェッショナルとして自己を確立したい人にとって、貴重な投資となります。
NACE-CIP1-001試験は、塗装検査業界で働く個人にとって必要不可欠な認定試験です。この試験に合格することは、塗装検査における高度な能力、知識、スキルを示し、世界的に認知されます。この試験は、多岐にわたるトピックをカバーし、合格基準は70％です。認定は5年間有効であり、個人は認定ステータスを維持するために再認定する必要があります。
質問 # 40
If inspectors identify issues of non-conformance during an inspection, they should
- A. perform additional tests secretly to ensure there are no other potential issues at the site
- B. instruct the contractor's personnel in how to correct the issue so the project is not delayed
- C. wait until the final report is being prepared to identify the issues in writing so they are fully documented
- D. inform both the Contractor and the inspector's supervisor so they can take appropriate corrective actions
正解：D
質問 # 41
ISO SA 2 is defined as:
- A. Thorough Blast Cleaning
- B. Light Blast Cleaning
- C. Very Thorough Blast Cleaning
- D. Near White Metal Blasting
正解：A
質問 # 42
Prior to using Inspection Tools the inspector must:
- A. Ensure the instrument is within calibration parameters
- B. Read the manufactures' instructions
- C. Be trained on how to use the instrument
- D. a), b) & c)
正解：D
質問 # 43
An inspectors personal log book should contain:
- A. Objective comments regarding the application work
- B. The inspector's personal opinions of the application team
- C. Subjective comments re ding the application team
- D. No comments regarding the application team
正解：D
質問 # 44
The main responsibilities of the inspector are to
- A. observe and direct the work of the contractors.
- B. demonstrate to the contractor how to apply the coating.
- C. direct and perform the work stated in the specification.
- D. observe and report the quality of the work performed.
正解：D
質問 # 45
If the project specification DOES NOT state the specific DFT measurement standards, the inspector should use
- A. their best judgment based on similar projects and specifications.
- B. NACE 2/SSPC SP10
- C. a recognized industry standard like SSPC-PA 2 that is broadly accepted
- D. a detailed checklist and document the lack of a standard.
正解：C
質問 # 46
SSPC SP 1 identifies the use of:
- A. A wide variety of materials
- B. Organic solvents
- C. Biodegradable detergents
- D. Inorganic solvents
正解：A
質問 # 47
Relative humidity is
- A. a measure of the amount of moisture in the air compared to the air temperature.
- B. the highest temperature at which moisture forms on a steel surface.
- C. a measure of the amount of moisture in the air compared to saturation level.
- D. the lowest temperature at which moisture forms on a steel surface.
正解：C
質問 # 48
A NACE Coating Inspector is permitted to transport coating material when:
- A. Asked to do so by the Owner's Representative
- B. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
- C. Asked to do so by the Coating Application team
- D. The Inspector should never transport coating material
正解：D
質問 # 49
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
- B. Carefully review the document and do the best you can
- C. Hire a third patty to assist you in understanding the document
- D. Advise the owners' representative of your lack of knowledge in this area
正解：B
質問 # 50
The form of corrosion that has the largest potential for unexpected catastrophic failure is:
- A. Galvanic Corrosion
- B. Localized Corrosion
- C. General Corrosion
- D. Atmospheric Corrosion
正解：A
質問 # 51
Stripe coats are generally applied to:
- A. Edges and corners
- B. a), b), and c)
- C. Complex geometric shapes
- D. Welds
正解：B
質問 # 52
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A. Presence of weld spatter may produce a false positive
- B. Chloride salt may produce a false positive
- C. Ultra-Violet light may contaminant the surface
- D. Synthetic oil or grease may not be identified
正解：D
質問 # 53
Removal of surface contaminants is done by:
- A. Scarifying
- B. A combination of methods
- C. Waterjetting
- D. Abrasive blasting
正解：B
質問 # 54
Upon arrival of coating materials, the inspector should
- A. observe and document time frame and environmental conditions between each coat.
- B. observe and document the amount of material and batch numbers.
- C. review coating contractors' plans for storage of coating materials and confirm they meet national, local and owners' fire and environmental regulations.
- D. observe aryl document that the applicator WFT at regular intervals during application.
正解：B
質問 # 55
As a NACE Coating Inspector your responsibility with respect to safety is to:
- A. Check the PPE used by the Applicators
- B. Act in accordance with the site safety requirements and set an example
- C. Check the credentials of the Safety Officer on site
- D. Assume the role of the Safety Inspector
正解：B
質問 # 56
......
問題集全額返金保証付き！NACE-CIP1-001問題公式問題集：https://www.goshiken.com/NACE/NACE-CIP1-001-mondaishu.html
厳密検証されたNACE-CIP1-001試験問題集PDF[2023年最新] 時間限定無料アクセスGoShiken：https://drive.google.com/open?id=16G1QgNblilKpDVEDuYnuimCIa3C6SjEY