[2023年10月16日] 無料CIP Level 1 NACE-CIP1-001試験問題を使おう
NACE-CIP1-001問題集でCIP Level 1必ず合格できる練習問題集
この認定プログラムは、表面処理、コーティングの適用、試験および検査方法、および安全に関する幅広いトピックをカバーしています。このプログラムは、コーティング検査技術の包括的な理解と、一般的なコーティング問題の特定と解決能力を候補者に提供するよう設計されています。
NACE-CIP1-001試験は、コーティング産業でキャリアを追求したい個人や、コーティング検査の分野での知識とスキルを向上させたい人々に最適です。認定資格は、コーティング検査員を雇用する企業にとっても有益であり、従業員が職務を効果的に遂行するために必要な専門知識を有していることを保証します。
NACE-CIP1-001試験は、コーティング検査官として認定を求めている個人の知識とスキルをテストするように設計されています。この試験では、表面の準備、コーティングの適用、検査技術、安全性など、さまざまなトピックをカバーしています。試験は75の複数選択の質問で構成されており、2時間の時間制限があります。
質問 # 40
Galvanic corrosion occurs on which of the following substrates:
- A. Wood
- B. Fiberglass Reinforced Plastic
- C. Metal
- D. Concrete
正解：C
質問 # 41
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Hire a third patty to assist you in understanding the document
- B. Carefully review the document and do the best you can
- C. Advise the owners' representative of your lack of knowledge in this area
- D. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
正解：B
質問 # 42
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor he can proceed
- B. Call your supervisor
- C. Advise the Contractor of your readings
- D. Advise the Contractor he cannot proceed
正解：C
質問 # 43
You are the NACE Inspector on a job where the Owner's specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:
- A. Skip the checks as you are. confident the blast pressure is OK
- B. Keep doing the checks regardless
- C. Keep doing the checks and consult the Owner's representative for direction
- D. Skip the checks and just record the same readings as you have been getting
正解：C
質問 # 44
Dew point is the temperature at which
- A. the air is saturated.
- B. condensation occurs.
- C. water freezes.
- D. humidity decreases
正解：B
質問 # 45
Which of these tests uses a syringe?
- A. Sleeve test
- B. Soluble salts meter
- C. Potassium ferricyanide
- D. Bresle patch
正解：D
質問 # 46
ISO SA 2 is defined as:
- A. Near White Metal Blasting
- B. Very Thorough Blast Cleaning
- C. Light Blast Cleaning
- D. Thorough Blast Cleaning
正解：D
質問 # 47
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- A. True
- B. False
正解：A
質問 # 48
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Call the supervisor
- B. Achieve consensus through negotiation
- C. Go with the majority opinion
- D. Never change his/her mind
正解：A
質問 # 49
Which one of the following documents is the best source for coating technical data:
- A. Technical Data Sheet
- B. Safety Data Sheet;
- C. Specification
- D. Application Guidelines
正解：A
質問 # 50
A NACE Coating Inspector is permitted to transport coating material when:
- A. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
- B. Asked to do so by the Owner's Representative
- C. Asked to do so by the Coating Application team
- D. The Inspector should never transport coating material
正解：D
質問 # 51
Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply
- A. Dragging a gauge through wet coating
- B. Placing the gauge along the longitudinal axis
- C. Using a damaged gauge
正解：A、C
質問 # 52
If a Thermoset coating is heated it will:
- A. Soften when heated and return to its original hardness when cooled
- B. Harden and return to its original hardness when cooled
- C. Soften when heated and retain its softness when cooled
- D. Harden and retain its hardness when cooled
正解：D
質問 # 53
ISO SA 2.5 is defined as:
- A. Near White Metal Blasting
- B. Thorough Blast Cleaning
- C. Light Blast Cleaning
- D. Very Thorough Blast Cleaning
正解：D
質問 # 54
The NACE Inspector should perform tests for soluble salts:
- A. Prior to coating application
- B. When specified
- C. Prior to surface preparation
- D. After surface preparation
正解：B
質問 # 55
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A. Chloride salt may produce a false positive
- B. Ultra-Violet light may contaminant the surface
- C. Synthetic oil or grease may not be identified
- D. Presence of weld spatter may produce a false positive
正解：C
質問 # 56
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT
- A. what items were coated.
- B. when the coating will be reapplied.
- C. how the item was coated.
- D. what materials were used.
正解：C
質問 # 57
Whenever dissimilar metals must join, the most common practice is to
- A. provide cathodic protection to prevent corrosion,
- B. coat all connected dissimilar metals.
- C. avoid coating all connected dissimilar metals.
- D. provide anodic protection to prevent corrosion.
正解：B
質問 # 58
ISO ST 3 is described as:
- A. Thorough blast cleaning
- B. Thorough hand tool cleaning
- C. Very Thorough power tool cleaning
- D. Very Thorough hand or power tool cleaning
正解：D
質問 # 59
A magnetic pull-off type gauge is a good choice when:
- A. Accuracy is not required
- B. Performing an adhesion test
- C. When an intrinsically safe tool is required
- D. When working on non-ferrous metals
正解：C
質問 # 60
......
NACE NACE-CIP1-001実際の問題とブレーン問題集：https://www.goshiken.com/NACE/NACE-CIP1-001-mondaishu.html
合格させるNACE-CIP1-001試験には更新されたのはNACE-CIP1-001試験問題集PDF2023：https://drive.google.com/open?id=16G1QgNblilKpDVEDuYnuimCIa3C6SjEY